Question about Hitachi 60SDX88B 60" Rear Projection Television

1 Answer

Picture issue The picture looks like a 3d movie with out the 3d glasses.

Posted by on

  • Phonetech66 Mar 12, 2008

    Thanks for the info...Now I have to find them in the tv set...



    I have no clue what they look like...

  • Phonetech66 Mar 12, 2008

    I see the heat sink and the stk's ....before I remove the main board how do I discharge the 200v capacitor's? The front panel tells me to short too contacts...Trying to find those contacts is a problem. Do you have a better way to discharge 200v ?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 8,617 Answers

Need to replace the convergence ICs

Posted on Mar 12, 2008

  • Sonny Berry
    Sonny Berry Mar 12, 2008

    They are mounted to a large heat sink usually on the left side of hitachis I am including a link that has a picture of what the ICs look like.

    http://www.electronix.com/catalog/advanc...

  • Sonny Berry
    Sonny Berry Mar 12, 2008

    Take a piece of insulated wire and short the capacitors leads together on the bottom side of the board. You should hear it discharge, just take the bared end of the wire and place it across both leads on the reverse of the circuit board and this will discharge the capacitors

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i watch a 3d movie on my 55"thorn tv?


the tv automaticly determines if it should go to 3D mode as long as the DVD player or say like PS3 or PS4 is connected to HDMI (yes those two game consoles will support HD Blueray 3D and DVD 3D movies) if the TV isnt displaying 3D look into the video settings of your TV to enable that ability also your TV will come with 3D glasses if the TV supports 3D

Mar 02, 2017 | Televison & Video

1 Answer

How can enable 3d on philips led 40pfl8605h?


Do you have the PTA02 accessory for the TV? This is a USB 3D transmitter and comes with 2 pairs of Active 3D glasses. The screen of the 40PFL8605H is not a 3D TV by itself.

Once you have the accessory plugged in, you may need to wait for the software to be installed on your TV before you can watch 3D content. See the manual for the TV for more information: http://download.p4c.philips.com/files/4/40pfl8605h_12/40pfl8605h_12_dfu_eng.pdf . This is on page 73 of the PDF.

I hope this helps. If you have the 3D accessory plugged in, try turning off the TV and turning it back on if the software did not install properly. The final thing to check is the "codecs" for your 3D movies on the USB stick. Make sure that they are compatible with the TV.

Cindy Wells

Apr 19, 2013 | Philips Televison & Video

1 Answer

CONVERT 2D TO 3D


If you just need the basic 2d to 3d conversion, I think a high definition video converter is a great and helpful tool, which can satisfy your demand of 2d to 3d conversion.

Jan 31, 2012 | Computers & Internet

2 Answers

When the tv is first turned on the picture is great. After about 5-10 minutes the picture looks like a 3 D movie when you're not wearing the proper glasses. Sometimes turning it off for 10 minutes and...


the 3d effect is caused by a mis alignment of the tree tubes you probably have a broken FRAME holding the tubes in place so that HEAT or VIBRATION can move them and the alingment is off dont forget you have one tube for RED one for GREEN and the other for BLUE if they are not aligned properly they can look like a 3d pcture without 3d glasses ha! sorry for the bad grammer...

Good luck!

Jan 18, 2011 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Picture looks like 3D without the glasses


This is a convergence prioblem that can be as simple as poor solder connections at the convergence ICs or defective ICs. In any case, to provide details, I will need the model number. Can you please update this and confirm that the model number is: 60PP9202? ALso, please indicate whether or not you wish to attempt the repair and I will provide additional instructions as well.

Thanks,
Dan

Dec 18, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

Convergence box is out - the picture is like looking at a 3D movie without the glasses.


There are two common problems with these sets.

Problem #1) Convergence

Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 23, 2009 | RCA R52WH73 Projection Television

1 Answer

Looks like 3D with out the glasses


you need the phillips dptv 305 - dptv345 chassis convergence repair kit which contains both convergence ics and all feed resistors and also free installation instructions with pictures. heres the link.
http://servicemanuals.vstore.ca/

Jan 22, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Picture in 3d without the 3d glasses


Replace 2 convergence chips, will start with stk ###-###

Oct 02, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Hitachi ultrascan HD pic looks like a 3D movie w/o the glasses


Take a look a the video below to determine if you have a true convergence problem or if you can make the adjustment through the menu feature on your TVs original remote.

Apr 03, 2008 | Hitachi 61SDX01B 61" Rear Projection...

Not finding what you are looking for?
Hitachi 60SDX88B 60" Rear Projection Television Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

75963 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...