Question about Mitsubishi VS-45605 50" Rear Projection Television

2 Answers

Mitsubishi VS45605 blacked out

My TV was on then I looked away for a minute and I heard a thunk, the TV went off. I try to turn the TV on and off, and it makes the sound that it turns on, but I get black screen and no sound, its turned on yet it basically looks like its not.

It had been recently repaired for an issue with its projection bulb going out. And this situation seems alot different than before, any ideas?

-Paul

Posted by on

  • sawofdoom Mar 12, 2008

    the warranty has just expired =/

  • adrianpennin Feb 15, 2009

    my tv is blacked out and the power light is on. It smelled of smoke

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i have the exact same problem, the issue is that i am in Mexico City and mitsubishi doesnt have any sevice here, so i would appreciate any soultions. What i did the first time that it happened was opened the back panel and use this gas duster to clean the whole system, then i had my tv working until a few days, weird right, well i hope somebody can help.

Posted on May 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

If the set is still under warranty with the previous repair, call the servicer back to have a look. Perhaps it is related to the original problem. Good luck!

Posted on Mar 12, 2008

  • Anthony Wilson Mar 12, 2008

    Call him anyway

  • Anthony Wilson Mar 12, 2008

    In most cases the technician will give you a break even if it is a new problem. You may have a problem in the power supply. Good luck

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Newly replaced lamp blew under 1 minute!


when you replaced the lamp were you wearing gloves,I hope so if not that could pop it.Other then that most likley a faultly bulb.

Dec 27, 2012 | Projection Televisions

1 Answer

I heard a popping sound in my tv, then it shut off. I turned it back on with no picture, then the green light went off and the red light came on. Is it the lamp?


yes , the lamp went out , u can get a shipone over the internet or buy the original from mitsubishi , i recomment the mitsubishi

Aug 26, 2010 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

My Mitsubishi WD-52631 went "POP"


No,probally a capacitor the help the power supply board to work or other boards to work is blown.Call some tv shops get a best quotes prices,get a tv tech out to it fix,if ur tv is out of warrenty.

Jun 17, 2010 | Mitsubishi WD-52631 52" Projection HDTV

1 Answer

I have a Mitsubishi WT-42311. Last week the


where you saw blue it sounds like your blue crt is shorting out could be just the video amp so
i would suggest you have a tech look at it for and estimate

Nov 24, 2009 | Mitsubishi WT-42311 42" Rear Projection...

1 Answer

Heard a pop and the screen went out?


i also had the same problem but mine kept making a weird sound like a squeky mice or something...so i hit the back of my tv and it just appeared back to normal...try hitting it at the back but not extremely hard. Best of luck!

Oct 22, 2009 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Diamond Shield for Mitsubishi VS45605


Unless you have small children it's better to just remove the diamond shield and throw it away. Less glare on the screen that way. But if you must have a new one go to a local glass shop and have a piece of plexiglass cut to the dimensions of the old one. We do that all the time and it works fine. Usually runs around $60.00.

May 27, 2009 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

Mitsubishi big screen vs45605


I believe I have a convergence problem with my VS-45605, i cannot get the front panel controls to move the blue and red crosses. I dont have original remote and a universal remote doesnt work either, any suggestions.

Jul 24, 2008 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

TV screen goes blank but power stays on


Sounds like the CRTs are going into protective blanking due to the vertical output ic needing to be resolderd. Try resoldering the vertical IC that may possibly fix the issue.

Jun 15, 2008 | Mitsubishi WS-73713 73" Rear Projection...

1 Answer

Whistle noise? POP? Black out


sounds like the lamp has shattered. check the lamp

May 18, 2008 | Samsung HLN5065W 50" Rear Projection...

1 Answer

Mitsubishi vs 5043


I turned the set on and everything was fine, then the screen went black and mullti-colored horizontal (arched) lines were flashing across the screen. The next day I turned the set on and everything was fine for about 5 minutes then the problem reoccures again. Haven't looked for solutions till now.

Apr 06, 2008 | Mitsubishi VS-5043 50" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-45605 50" Rear Projection Television Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...