Question about Radio Shack (15-2147) Remote Control
I have a 15-2147 RadioShack remote control.
I need to program it to my DVD -Emerson MP3 DVD player and
my VCR-Emerson HD VCR
The program codes did not work.
Also, I need to program to my TV -Magnavox (not digital) 19" TV so I can access the menu. Since using the new remote, I cannot access the menu using the old remote (was worn in channel and volume areas).
Can you help? Teh way my DVD works, I need to access the menu to put on auxilliary. I already did this once with the old remote (after I started using the new remote) and it worked.
IF not then you should be able to program in
Emerson 0591, 0675 for the DVD player
Emerson 0037, 0184, 0000, 0121, 0043, 0209 for the VCR
THe problem arises however, that the vcr and the dvd function buttons are the same, so you can only program one or the other. You need A different remote. I would suggest the 15-2142 made by radioshack. It is the Family 4 in 1 remote, and it has all the functions you need. THis remote is also backlit on some buttons to make it a little easier to see in the dark.
Posted on Mar 19, 2008
Tips for a great answer:
Apr 13, 2016 | RCA Remote Controls
Jan 10, 2013 | Remote Controls
Jul 28, 2012 | RCA RCR311B Remote Control
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Sep 26, 2011 | One For All URC-3021 Remote Control
Dec 09, 2010 | One For All URC-3021 Remote Control
Jun 15, 2008 | RCA RCR450 Remote Control
Jun 13, 2008 | RCA Universal Remote Control
Mar 25, 2008 | RCA Universal Remote 3 Device Remote...
Jan 12, 2008 | Remote Controls
152 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: