Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer

2 Answers

Whirlpool Ultimate Care 2 washer will not spin

The washer will run through all the cycles but will not spin. All you can hear is s noise when it goes into the spin cycle. How can i fix the problem.

Posted by on

  • 2 more comments 
  • Joe Girouard Mar 19, 2008

    Wont spin makes noise

  • Anonymous Dec 07, 2008

    MY MACHINE WILL NOT SPIN EVERTHING ELSE IS WORKING

    WHENITS SUPPOSED TO SPIN IT MAKING A TICKING NOISE

    AND SOMETIMES I CAN GET IT TO SPIN IN THE LITE SPIN MODE ...

  • Anonymous Mar 20, 2014

    WASHER GOES THROUGH ALL CYCLES BUT DOES NOT SPIN ALL THE WATER OUT AND WILL NOT SPIN AT ALL MAKES GRINDING NOISES WHEN TRYING TO SPIN

  • Bob McElligott
    Bob McElligott Sep 12, 2014

    Yes. That would be the motor coupling. You can go herehttp://www.mcelligottappliances.com/, click on "How-To' videos and it shows how to easily change the coupler. You can also buy that coupler for about $6 on that site with a quick link to that part on Amazon.com. You can fix it with a phillips and standard screwdriver

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Exactly what I needed to know, any guide you can point me to on how to access and replace it?

Posted on Jan 03, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Whirlpool Master
  • 2,651 Answers

Sounds like a broken motor coupling( this machines equivelent to a belt. part number 285753a . mounts directly to the motor shaft and connects to the transmission, order a new one it installs between the motor and transmission,assy

Posted on Mar 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool ultimate II washer will not spin everytime in the normal spin cycle


Hi, Ginger. We're sorry to hear about the difficulty with your washer. Below are links to our Use & Care guides, Parts Diagrams, Troubleshooting information and the Service are of our website. We hope this helps! http://bit.ly/112Lu7q

Aug 23, 2014 | Washing Machines

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired


Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

I have a whirlpool ultimate care 2 top load washer no spin


Sounds as if the drive hub which the tub is attached to maybe free spinning. Not an expensive part but does require a special tool called a spanner wrench to remove and replace.

Jan 31, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

The spin cycle for my


Dear shelldon39, Fri 2-20-2009 9:24pm EST (USA)

Some machines will shut down during the spin cycle as a precaution to prevent damage!

They will do this if you overload the washer with clothes and/or use too much detergent!

If this doesn't help please get back to me with more details!

jack
1131431.jpg

Feb 21, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Excess water in clothes after spin cycle


Unblock the outflow pipe from the machine that goes into the sump under the sink. (have a pot ready for water overflow) This will help drain the water. If the spin cycle is making a screetching sort of noise then it is possible that the carbon brushes will need changing. This affects the spinning if the brushes are worn.

Nov 05, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer will not Spin during SPIN CYCLES


Thanks for the question If your washer sorta spins and washes ok, your problem is with the transmissionTHanks for your question THe Appliance doc

Jul 29, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool ultimate care 2 washer wont spin


Are you in the Delicate Cycle? Do you have spin speed control set for slow?If both answers are no,than what is the model & serial number??

Apr 28, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool Ultimate Care Model LSR8233EQO - Loud noise during final rinse/spin


Sounds like the clutch, mi9ne works fine but is noisey when spinning, repair guy said it was the clutch.

Feb 05, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

Related Topics:

1,032 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...