Question about Audio & Video Receivers

1 Answer

In car audio

I purchased a panasonic in car cd/radio model CQ-C1465N
but when i remove the facia for security reasons it loses all it's radio presets this problem is mentioned in the troubleshooting section of the instructions but does not offer a solution
regards
Andrew

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

Armitch-this sounds like a simple problem of having your main power wires backwards.The red has to be hooked to a wire that shows 12volts when key is on.The yellow wire must have power all the time-memory .The yellow wire is what keeps your memory. Try this and let me know I can help.
cooltek Mar,12/08

Posted on Mar 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can one enter security code of clarion car stereo


you use the numbers on the radio preset buttons to enter the code.

Aug 18, 2013 | Clarion Cz102 In-dash Cd/mp3 Car Stereo...

1 Answer

I just bought the RCA CD/DVD home theater system RTD206. I cant figure out how to change the radio channels. Also cant figure out how to change the cd disk tracks. Does this system have a remote. Or do...


The system does have a remote (at least it should come with one if purchased new), and you need it to control pretty much everything. Here's what the manual says about the radio tuner (you can find the whole manual here) :

Manual Tuning
1. Connect the FM aerial and the AM loop antenna at the back of the unit. Rotate the AM loop for
better reception.
2. Press TUNER to enter TUNER mode and toggle between FM and AM.
3. When the FM station broadcasts Stereo sound, ST is displayed.
4. Tune a station by pressing repeatedly the TUNER+/- buttons until the desired station is found.
Alternatively, you can press and hold the same buttons down for about one second to activate
the automatic search function. In this mode the player will automatically tune frequencies until
it finds a station.
5. Repeat step 4 to tune to another radio station.

Storing radio stations
The player can store up to 30 radio stations in its memory. You can enter every single radio station
yourself or the player can store all available radio stations automatically in ascending order.
Automatic preset programming
1. Press TUNER to enter the Tuner mode.
2. Press and hold TUNER down for 3 seconds to start automatic preset programming.
Note: A weak signal can affect the "Automatic preset programming" function's efficiency. Adjust the aerial for better
reception and a more efficient search.
3. Radio frequencies will be browsed and radio stations stored automaitcally. When all the available
radio stations are stored or all 30 memory locations are full, the auto preset programming
function will stop.

Manual preset
1. Tune to a radio station (see "Manual tuning" for details).
2. Press MEMORY once to enter flashing Preset Loaction number.
3. While the Preset Location number is still flashing, input your desired preset number (1-30) using
the numeric buttons or press the CH+/- buttons, then press MEMORY to store it.

Retrieving preset stations
1. Press TUNER to enter the Tuner mode.
2. Press CH+/- to search up or down for the preset stations or directly press the numeric buttons.

As you see, you really need that remote. The same is true for disc play. While there are front panel buttons for play/stop, disc skip, and drawer open/close, you don't have any other control without the remote. Without the remote control you'll find this system won't do too much, unfortunately. If you bought this new, check the packing material before you throw it away to make sure the remote's not still somewhere in the box. They often come tucked into slots on the foam inserts.

Also, when you hook the unit to a TV, it's just using the TV as a video display device. The TV has nothing to do with any of the system's other functions.

I hope you have luck locating the remote! Thanks for using Fixya.

Jun 29, 2011 | Audio & Video Receivers

1 Answer

I require a user manuel for a Panasonic cd/double tape/radio model RX-ED70 EB-K FS61OE4750 CLASS 1 Panasonic Laser Product . Many Thanks for your help. bwesmith


You can get your manual for free from here:
http://safemanuals.com/user-guide-instructions-owner-manual/PANASONIC/RX-ED70-_J
Enjoy

Aug 13, 2010 | Panasonic Audio & Video Receivers

1 Answer

Onkyo tx676 loses its preset radio stations when switched off.


No battery, but there is a 0.1 F supercap on the main board that acts like one. Look for C8007.

Sep 14, 2009 | Onkyo TX-DS777

1 Answer

Chevrolet kalos blaupunkt radio removal problem


Remove the secuirty panel from the front o f the unit.
with a small fine flat bladed screwdriver remove the two facia strips - one either side, CAREFULLY! they are on clips.
You should find four 10mm bolts holding the whole frame in, remove these and you may need to fit a subframe to re-fit your new unit.
Fit your new unit or frame into place, replace the bolts - don't over tightem them - and the trim.
Fit your new unit - Happy motoring!

Apr 15, 2009 | Audio & Video Receivers

1 Answer

I have recently purchased a car that has fitted an Alpine CDA 7842R CD radio heead unit. There are no information details showing up in the facia panel to tell what radio station ir what CD track is being...


Por lo que dices el display del estereo no enciende muchas veces es una tira flexible que conecta la pantalla con la tarjeta del estereo tienes que remplazarla.

Apr 05, 2008 | Audio & Video Receivers

1 Answer

Panasonic cq-c3100u


scottmar7- You need the wiring diagram for your panasonic deck,the diagram is as follows.
red- 12volt key switched
yellow-12volt constant-memory
black-ground
white-left front positive
white with black stripe-left front negative
grey- right front positive
grey w/black stripe-right front negative
green-rear left positive
green w/black stripe-rear left negative
purple-right rear positive
purple w/black stripe-right rear negative
blue- remote turn on- for amplifier
These are all the wires you should need,to hook up you deck.
If you need anything else let me know,I can help you,happy listening. cooltek mar,14/08

Mar 14, 2008 | Audio & Video Receivers

1 Answer

How do you set the clock on the panasonic cq-c1121u cd radio.


1 Turn the ignition switch until
the accessory indicator
lights.
2 Press [SRC] (PWR: Power).
3 Press [DISP] (CLOCK).
4 Hold down [DISP] (CLOCK) for more than
2 seconds.
5 Adjust the hour.
[[]: sets the hour ahead.
[]]: sets the hour back.
6 Press [DISP] (CLOCK).
7 Adjust the minute.
[[]: sets the minute ahead.
[]]: sets the minute back.
8 Press [DISP] (CLOCK).
Notes:
¡ "AdJ" is displayed before adjusting the clock.
¡ Hold down []] or [[] to change numbers rapidly.

power off displayPower Off
Press [DISP] (Display) to change the display.

Mar 10, 2008 | Audio & Video Receivers

1 Answer

Vsx-108 preset resetting


I too have the issue. Any luck in your resolve? I am checking with a service center but would love to resolve it myself.

Dec 06, 2006 | Pioneer VSX-108

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68153 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...