Question about NEC DTU 8D-2 Corded Phone

2 Answers

Change the Extension ID To New Employee Name

Employee has left and new employees name needs to be programmed into the extension ID. How can this be done? Not in manual.

Posted by on

  • Kathy Apr 14, 2008

    I have the same issue; old employees gone and when a call is transferred to new employee it has the old one there. I would like to change it. Let me know.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

To change the names on the NEC Dterm 80.

Feature, Conf, #, 0, *, 8974, LINE 4, 18.

Select Conf to go to the name you want to change.

Select Hold to erase the characters.

Select Transfer to save it.
Once you save, make sure you go back to "18".


Posted on Apr 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

The correct way:

with the phone hung up:

1) "Feature" then press "1"
2) then press "#", "*", "#"
3) lift the phone, then hang up
4) press "Speaker"
5) dial "700"
6) press "hold"
7) enter the name using the number buttons (like you were sending a text message on a cell phone)
8) press "hold" then "Speaker"

Posted on Apr 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change employee name on toshiba 3220


Older DK systems are very difficult unless you work with them frequently. Newer CiX systems use the eManager interface.

Aug 12, 2014 | Toshiba DKT-3220-SD Corded Phone

1 Answer

How do I change the name on the phone from the previous employee to the new employee's name?


Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Nov 10, 2010 | Nortel Norstar 16-Line PBX Speakerphone

2 Answers

Change the inter callers name


To chane the name on the sets you'll need to enter telephone programming.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. john = 5 -> 666 -> 44 -> 66
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Jul 16, 2010 | NorStar M7324 Telephone

1 Answer

We have employees that have left and new ones have taken their place. How do I change the names on the phone display to the new employee?


Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key. (or the clear key to erase)
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Jan 21, 2010 | Nortel T7316E 2-Line Corded Phone

1 Answer

Trying to change name on a phone - new employee


Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Sep 30, 2009 | Nortel T7316E 2-Line Corded Phone

1 Answer

Cannot change name ID for each extension, shows old names


Read several on-line manuals and found out another way to access programming trees. It was a confusing mess and was mostly trial and error. The 4 keys under the read out screen are a key factor and knowing how those buttons interact with each other is important. In the process I screwed up regular functions because the password that allows set-up using the feature codes cannot be changed. Not a user friendly set-up at all and the initial manual virtually useless for some needs.

Nov 25, 2008 | NorStar M7310 Corded Phone

1 Answer

Station (extension) names


From extension 10 or 11

Feature 00
Left intercom
Left intercom
Right intercom
enter the extension you want to modify
press the left intercom
Enter the name.
When finished, press feature 00 to exit programming.



Nov 11, 2008 | Lucent PARTNER18 Corded Phone

1 Answer

Help


You needs to enter to a program mode inside the PBX option.

the name Its inside the PBX.
Once you on the Extension 101 enter program mode press choose program 004 select the station number and put the new employee`s name.

Jul 11, 2008 | Panasonic KX-T7630 Corded Phone

2 Answers

Changing employee name on extension


http://www.phonserv.com/1_m7310_phone_meridian_norstar_phone_system.htm

This has PDF file that will give instructions.

Also this link has more instructions:
http://www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_systems.htm

To Change the Name on a Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number (extension. you want to change the name on
5. The display shows "Reset Password"
6. Select the softkey under "Next", keep hitting "Next" until the display shows the name
7. Select the softkey under "Chng" to enter a new name
8. Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma and then enter the first name. When spelling the name, press "#" to move to the next character
9. Select the softkey under "Next" to save the change
10. Hit the release button

Apr 30, 2008 | NorStar M7310 Corded Phone

1 Answer

HOW TO CHANGE NAME ON THE EXTENTION LINE


You will have to go into system programming. If you are not familiar with it, you will need to call in a professional, as it is too hard to explain over posting.

Dec 29, 2007 | NorStar M7208 Corded Phone

Not finding what you are looking for?
NEC DTU 8D-2 Corded Phone Logo

1,787 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Brian LaDuca

Level 2 Expert

149 Answers

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...