The camera has been working fine until 2 weeks ago but when the camera takes a lot of light, them the pictures are stripy. On the other hand the video recording is ok with the same light. A shop told me that the camera is broken (the sensor) and i should buy another one. what can i do??
The camera has been working fine until 2 weeks ago but when the camera
takes a lot of light, them the pictures are stripy. On the other hand
the video recording is ok with the same light. A shop told me that the
camera is broken (the sensor) and i should buy another one. what can i
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your camera is not dead, It is surely dying. Perhaps just a flat cable lost connection inside your camera, But more likely the electronics is on the end of life. My DX7590, started to act strange a few year ago, but I managed to shoot pictures still. I could not look back what I had shot, but I still made lots of pictures, till also shooting was impossible. (I could get the pictures from the memory card with an external card reader on my computer. My next step was again (a better) compact, but since over 2 years now I'm using a DSLR. I have learned a lot about digital photography with my Kanon camera's.
My 4300 works fine until this week. No picture display on the LCD screen. Settings like date, exposure, etc.. are fine on the LCD screen. Able to get into setup mode and the colour menu selection box is fine. This shows that the LCD screen is working fine. Prior to this happening, I notice that when I took pictures in zoom mode, the picture turn out to be orange. I suspect this is caused by electronic failure. Light entering the lens cannot be transmitted to the LCD screen. Some photoelectronic stuff had reached its MTBF (mean time between failure)? Is there a way to save this camera?
Unfortunately it is not possible to preview the picture on the camera's LCD screen before you take it.
The 300D is an SLR camera. What this means is that as light comes in through the lens it is deflected by a mirror (which sits in front of the sensor) up to the viewfinder. When you take a picture, the mirror flips up out of the way and a mechanical shutter opens, exposing the sensor to the incoming light. Because the mirror and shutter are in the way of the sensor, it is not possible to have a 'live preview'.
Compact cameras (which do allow you to preview the image on the LCD screen) work in a different way. They have a completely separate viewfinder, and they do not have a mechanical shutter - The signal from the sensor is simply switched electronically between the LCD screen and the memory.
On the plus side, although you might not be used to using a viewfinder, you will find the image you see is a lot bigger and a lot brighter that those you get on a compact camera.
The problem lies in you camera's CCD unit which is located on the back of the lens held on be 3 small screws it could also be a setting in the camera's menu try going into the menu and reseting the camera to default it works some times if that does not work than you need the ccd replaced pretty easy fix I fixed 1 with the same problem about two weeks ago for someone it happens I hope this helps you out.
I have Fuji FinePix 2650 Digital camera with same problem. I can almost guarantee this is not a firmware problem. I went mountain biking a few months ago and take pictures. I take out camera and turn on. I get lines then white screen. I banged on camera and fixed it. Later a few weeks ago I turn it on and white screen. i beat this thing and get bad menu selection screen for a moment then white again. It takes pictures well and talk to computer no problem but no LCD picture. I thinking it is loose connection for LCD. Send it for repair or if you seek adventure try to fix it yourself!