Question about NetGear DG834G 802.11G Wireless ADSL Firewall Router [ DG834GNA Wireless ] (114587)

1 Answer

No access to internet via wireless or ethernet

I recently realized my connection via wireless and ethernet will not connect. My icons on the toolbar show good connectivity, but I am unable to access the internet. I checked my Windows firewall and that seems OK.

I was working before I ran a virus check and backed up my files.

any clues

Bill L

Posted by on

  • Anonymous May 19, 2008

    ,.. wireless connection shows send and received packets in thousands.. but unable to open any site,..

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 169 Answers

Check ADSL is active and connectted on the router.

Use webmanagement link the link below.
http://192.168.0.1

username: admin
password: admin

If the above details does not allow you to connect, check under the router for correct details.

Posted on Jun 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not connect wireless to internet


verify that the cable are conned correctly. now the ethernet cable that come from the cable modem do not need to be plugin to the port that is label Internet, it need to be plug in any port 1 to 4. then access you router via a ethernet cable and setup the router of wireless access.

Jan 13, 2012 | Linksys Wireless-G Broadband Router

1 Answer

We have cable internet provided by Virgin. I am accessing the internet by plugging the ethernet cable dirctly into my laptop rather than via my DI524. Have just read a post that says I have to be connected...


If you can connect to the internet using the Ethernet cable on your laptop then the cable modem is configured correctly.
If you want to connect to the Internet using the D-Link wireless router then first you need to configure the D-Link wireless settings and then configure the wireless card in your laptop with the D-Link's wireless settings. Remove the Ethernet from the laptop and connect it to the WAN/Internet port on the D-Link wireless router.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mar 13, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

No wireless connection


Dont enter the Router IP as WWW.192.168.0.1, Instead just type 192.168.0.1 and it should let you access the Router EWS Page. you are trying to access Internal network ( which we can call local network or LAN ) so do not use WWW.

In the Address bar of Internet Explorer, just type the IP Address.

Jun 24, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

One computer will not connect to the internet


Possible the network card on the computer. Open the control panel on the not working vista pc. Make sure you are in classic view and select device manager. Check to see if there are any yellow exclamation marks, or question marks on the icon beside your network adapters: ethernet adapter or pci controller, this would indicate conflict on the computer. You will either need to reinstall that specific adapter for a disk or usb stick, or contact your pc vendor to repair it.

If the icon beside has a small white circle with a block arrow on it, this adapter has been disabled. Right click on it and select enable to start the connection again.

If this is no help try temporaly disabling your firewall it could be blocking your router connections.

Apr 16, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Cannot connect to internet via wireless router


You better reset it to the factory settings and reconfigure

Nov 08, 2009 | NetGear WGR614 Wireless Router

1 Answer

F5D7231-4 stopped connecting to Internet via downstream router


Why did you change it from dynamic to static? My suggestion would be to put it back to dynamic and let it grab a good ip address from the gateway. The other option is to contact whoever managed the network at your apartment and see what they will charge you for a static IP address.

May 23, 2009 | Belkin (F5D7231-4) Wireless Router

1 Answer

I can't hook my computer up to my phone line for internet. I have my router and another desktop hooked up to the phone line through the router.


That modem is in itself a router. However it only has one Ethernet port and no means of broadcasting a wireless Internet Signal which makes its function of a Router somewhat useless. What you need a(n) (wireless) access point. The Access Point will give you more Ethernet slots allowing more computers to be connected to the modem/router via CAT5 (Ethernet) cables. Depending on if you get a Wireless access point or not you might also be capable of using a wireless adapter to connect to the 2wire and get Internet access.

Let me know if I need to clarify any of the points above or if I can assist you further.

Mar 16, 2009 | 2wire 1800HG Router (RG1800HG00)

2 Answers

Linksys Wireless-G 2.4Ghz Broadband Router Problem


You have to check if your computer can connect to the modem with an Ethernet cable. This will tell you if the ethernet port on the modem is working. if that does not work call your cable provider.

Next thing after you get the instructions above done.

Press the reset button on the back of the router> press it in for 30 seconds then let go and pull out the power. Connect the router up the way it should be before you reset by the way. check if you have internet if you do not follow hte directions at teh link below.

CABLE SETUP

If you need more info just message me

Aug 29, 2008 | Linksys Wireless-G Broadband Router

2 Answers

Belkin Wireless Router


1. you need to put the software belkin installation disc into the girls laptop not just the desktop.

2. you need to plug the modem back in

3. on the back of the router press the little button NOT THE RESET BUTTON MAKE SURE IT IS THE LOCK BUTTON it will ask you for a password on the laptop

May 24, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

Linksys Wireless WRT54G vs. WET54G


For what it is worth, I fhave found streaming video does not function well using a wireless connection. The options of multipale routers will work as long as you configure them as to not have conflicting IP address assignment's via DHCP, and the routers do not have matching IP address's. Never fear all is possible with paticence. BPCS

Jan 20, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
NetGear DG834G 802.11G Wireless ADSL Firewall Router [ DG834GNA Wireless ] (114587) Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...