DEH-P6800 Auxillary Problems

The 7400 does not have an RCA input, you need to purchase a separate adapter like this one. It is also known as a "CD-RB10" and a search on ebay will bring up plenty of options. Cheers, Dan

You would need the Pioneer CDIB100 iPod adapter instead.
It might charge your iPod, but it does not charge some iPod devices such as the Nano, iPod Touch, and iPhone.

You can get the manual on the link below on page 8 tells you how to remove the face.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP680.PDF

Good Luck and please rate 4 thumbs up for the free answer

when you open the face, there should be a catch on the bottom in the middle, press that catch and pull the face towards you.

Here is the link for your manuals:
http://www.pioneer.co.uk/uk/support/manuals/DEH-P6800MP/index.html
you can use an adapter from ipod to rca jacks and go through the aux input, then just select that source.

Cheers!

yes or you audio out put on the unit is bad

DIRECT FROM PIONEEER

Check this out, it has the owners manual and install manual

http://pioneerusa.com/PUSA/Support/CarAudioVideo/Source/CD-Players/ci.DEH-P6800MP.Support

hope this helps, Thanks

push and hold the function button with the radio off but with the vehicles key on, it will take several seconds but it will beep and give you access to change several things including toe aux off and on
hope this helps!

As far as iPod connections - they will work with a regular iPod and an iPod Nano. You have two options depending on how much you want to spend and how much convenience you want.


Option 1 - Use a Pioneer CD-IB100 adapter. This will plug into the docking port on the bottom of the IPod, charge it, offer control and song information on the head unit. You need to use this one and not the newer CD-I200 cable because your head unit is not compatible with the newer piece.


Option 2 - Use a Pioneer CD-RB10 adapter and a 3.5mm to RCA cable that will plug into the headphone jack of the iPod. You will only get audio input to the head unit but this option is somewhat cheaper.


As far as the clock settings - hold the 'source' button to shut the unit off(key still has to be on). Push the 'function' button until options appear - you can switch between options by repeatedly pushing the 'function' button and adjust settings by using the up/down/left/right arrows.