Question about Sanyo PLC XU35 Multimedia Projector

5 Answers

Power Point Presentation Using Sanyo Pro Xtra X Multiverse Projector

Hello,

I am planning on giving a power point pres. using my lap top computer and the Sanyo Projector, however I cannot get a signal. I connected my LCD monitor cable to the Sanyo Projector thinking that may issue my presentation. Can you help? Thank you.

Andrew

Posted by on

  • 1 more comment 
  • Anonymous Mar 12, 2008

    That was real helpful....

  • Anonymous Sep 17, 2008

    same problem

  • Anonymous Mar 06, 2009

    cant get the laptop to show on projector

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Don't forget to select the Fn key and F4 on HP laptops. It could also be the Fn key and F8 depending on the laptop brand. It is the apple key and the F7 key on a Mac notebook. On Laptops this will toggle the video to the aux port where the monitor cable connects to the projector. There are 3 modes. video on the laptop screen, video on the laptop and projector, or video to the projector only.

Master Rod

Posted on May 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi i have sanyo proxtrax multiverse projecter had no hand book easy to work as to set it up it tells u computer 1 computer 2 in menu put in computer 2 then it comes up VIDO RGB PUT IT IN RGB THN PRESSED FN F2 PROSTO MY WINDOWS COME UP OF I WENT . WHY PAY TECH WHEN YOU ASK my friends work with computers

Posted on Jan 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have to ensure that the Laptop is feeding an image through the VGA port. The simplest way to do this is to press your laptop's Fn key and the CRT/LCD key (usually the F8 key) together. Also, you have to ensure that the projector is on the PC analog input mode.

Posted on Mar 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 319 Answers

Call tech support! That's why these people get paid. Sites like this wouldn't need to exist if they did their jobs correctly!

Posted on Mar 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you press the F8 button or other CRT/LCD button on your laptop?

Posted on Mar 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the Sanyo multimedia prox-III hook to direct tv


Sanyo connect directv Multimedia Projectors Questions ...

www.fixya.com > Forum > Tags > connect directv > Multimedia Projectors
Sanyo multimedia projectors connect directv related questions and answers. ... 3Answers ... configuration hey...i have a sanyo PLC-SU30 PRO-X MULTIVERSEPROJECTOR and i can't connect it to my laptop,i have connected the cable and ...

Sanyo Pro-X multiverse projector - YouTube

? 1:46
https://www.youtube.com/watch?v=awwXqdPRkNw
Feb 27, 2013 - Uploaded by WeeePC
Sanyo Pro-X multiverse projector start up. ... It was Sanyo at first sight!! ... 3:49. How we setup our LCD projector to reflect onto the kitchen table ...Missing: directv

db:: 5.32::MBP and Sanyo Z2 Projector 19

www.hivmr.com/db/199a98kjjjjz33k9kzk9p8kdfc1cdfjs
i have a hp g60 laptop and want to connect it to a sanyo pro-x projector, but i cant find it on the ... problem: I have a Macbook Pro 2009 running 10.6.3 and an Epson Projector.... You should hook up your projector to the DVI or the VGA. ..... I just bought a Sanyo Multimedia Projector (PLC-XU25A) and I can't get the projector ...

Jan 20, 2016 | Sanyo Multimedia Projectors

1 Answer

Connecting sanyo pro xtrax multiverse projector to a Macbook pro


VGA to HDMI cables don't work. They're a con. VGA is an analogue signal. HDMI is digital. It's not possible to convert from one to the other with just a bit of wire.

Sep 02, 2014 | Sanyo PLC-XU101 Projector

2 Answers

I have a Dell laptop ready to go with my first Power Point presentation. I check the projector out from the library and there are no instructions. I googled instructions and tried the advice: Push Fn and...


Look for the F-key with a square/icon of a laptop. Press FN+This button until you see your screen display show that it will be using your LCD + the output on your computer. Remember you need to hook both the VGA or HDMI out to the projecter as well as the USB cable.

Mar 03, 2011 | InFocus In2102 Projector

1 Answer

Can you connect a Mac ProBook laptop to a ProxTrax Multiverse?


Hello. There is no "device" needed to connect the units together...You'll need a cable that is"mini display port to vga". In order to connect the projector to the laptop, the cable has to have the special Apple connector which fits into a specific socket on the back of the laptop. The other end is just a standard vga connector which is plugged into the computer input on the projector. Hope I helped you!

Aug 20, 2009 | Sanyo PLC XU35 Multimedia Projector

1 Answer

My Pro-X won't communicate with my computer


The first check is to make sure that it does accept other VGA signals into the 15pin D connector use 800X600 resolution, if signals are present then it is because you need to configure the output reference on your laptop.This is by using the F keys etc this switches the VGA XGA signals from your laptop screen and reference's it out to the connector.Kind regards J Williams www.jvsvisual.com

Jun 13, 2009 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Using a Sanyo PLC WXU30 Multiverse Projector


should be able to download manual online, you cant just use a flash drive must be connected to laptop via vga cable, also I am not too sure about the mac, as i use a cheaper type laptop, but the display must be set for dual.
on windows this is done by right click, properties, advanced menu

Dec 16, 2008 | Sanyo PLC-WXU30 Projector

1 Answer

Sanyo PRO Xtrax Multiverse Projector powers on but no reflection appears


broken lamp?? check for little cracks in the bulb bar.
If lamp is discoloured( dark grey), overheating is cause, no cooling after using the PJ.

Sep 25, 2008 | Sanyo PLC XU35 Multimedia Projector

1 Answer

Configuration


hello Friend

Connect the RGB Cable of the laptop. Power up the Projector and restart your Laptop. that will automatically run. Or Go to laptop display properties by right clicking the mouse and settings to resolution 800x600 pixels and then check.

Viren

Rave Services India

Feb 07, 2008 | Sanyo PLC-SW30 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC XU35 Multimedia Projector Logo

4,582 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5605 Answers

Are you a Sanyo Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...