E-10 takes black pics, screen is black, eye piece is black....Help!
Help, I was at a wedding taking pictures and everything was great. All
at once the screen went black, everything is black in the eyepiece and
I took pictures and they were black as well. I have tried everything to
change this and nothing works. I have never had this problem and don't
know what to do??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
um, i'm no expert at this, but try to go to the menu and see if you can change the color of the screen from there. some cameras have totally different menus for taking pictures and videos. hope i could help!
Belatedly I've learned that it pays to take a digital photography course when you own an M10. It's a great camera but it expects a lot of you and the manual is hard to comprehend. When you reset the camera, you erase the entire photo memory -- you should only use it when you want to clear out the memory.
IF you have vital photos there that you want to retrieve (like wedding picture), you can take your photo card to a photo store and for (I'm told) $100 to $150 they can possibly retrieve your pix. My instructor said there also may be some free recovery software out there online, although he didn't give any specifics. Good luck!
You hit the EVF/LCD button near the "eye hole". When this is pressed it will cycle viewing through either the optical viewfinder or the LCD screen. This display is controlled independantly on each of the modes: shooting, or viewing. This is so you can set the camera to view pics before taking them from the optical viewfinder and view pics once taken from the LCD or vice-versa.
No worries, I think I can help you with this one.
I believe that if you are using your Samsung Digimax in either "Auto" or "M" mode you will only have the options of "red eye flash" or "no flash". BUT HOWEVER, if you select the "Prog" mode on the dial on top of the camera, you will have 4 flash options - "red eye flash", "auto flash", "slow flash" or "no flash".
I hope that this helps!
Piece of junk that took great pictures for 1 year and now shows a black screen. Do not buy any Canon products. We also have one of these pieces of junk at work, now displays a E 18 code. Appears Canon wants to make mucho dollars by producing ****.
Do you still have the pics on the memory card? If you do take the mem card out and the "format" the internal memory of your camera and then reset it. See if that helps if not you are going to have to Call the repairs center at 800-706-2534 and then keep choosing option 1.
Take mem card out.
Turn on camera
go to setup tab
go up until you see format
press right arrow and highlight format
press set...it will say "Busy, please wait"
Once you are back to where you can take pics press menu
go to setup tab
go up to reset
press right arrow & highlight reset
See if that works for you.