Question about Projection Televisions

1 Answer

Polaroid 4011tlxb,wont turn on,red led

Polaroid 4011tlxb, lcd won't turn on,red led on all the time

Posted by on

  • hdsparky Mar 11, 2008

    no "crowned" caps on power pcb or main pcb,measured the 4 1000 uf caps mon power pcb all are ok.getting 5 volls and 12volts to main pcb and 24 volts to inverters.looks like main pcb problem

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

Take the back off and look on PCB you should see a couple of 1000 uf caps bulged up and change them out.

Posted on Mar 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could be the problem with LCD tv?


There is still a power leak and intermittent short on the circuit board. You did not get the entire board fixed. Check all diodes for polarity and openings. Test resistance values and look for any other unstable components.

May 09, 2014 | Projection Televisions

3 Answers

19 inch polaroid lcd tv model # TLA-01911c need polaroid code for universal remote


use codes:
10835
0835
835

it was working for leadcrayon of RCForums

Jul 27, 2008 | Projection Televisions

1 Answer

Sony kds-r60xbr2 power wont come on and hte power led is blinking red 5 times


The 5 blinks is indicating the lamp ballast needs replacement your model uses the Sony lamp Ballast 147401211 for sony models KDF42E2000, KDS-50A2000, KDS-50A2010, KDS-55A200, KDS-60A2000, KDS-60A2010, & KDS-60XBR2 amd LDS-R60XBR2
Which is available at the bottom of the page at the following link. The ballast comes with installation instructions,
http://www.tvrepairworld.com/sony_circuit_boards/sony_dlp_circuit_boards

Aug 04, 2012 | Sony KDS-R60XBR2 Television

1 Answer

Kdfe55a20 won't turn on at all It's a Sony


which LED lights on front are on and or blinking?

If the red or others blink look to see if they are blinking a specific number of times--like red one blinking 3 times, pause and repeating--this is a error code and may indicate what problem in set is.

Apr 24, 2012 | Sony Projection Televisions

1 Answer

I have a panasonic projection TV, PT-60C13 that will not turn on. Upon pressing the power on button, the button flashes green many times, then flashes red five time then one orange flash. This red/orange...


Hi,

The most common cause of Panasonic Rear Projection LCD TVs not starting is bulb failure. The PT-60LC13 users manual gives some help in translating the LEDs on the front of the TV.

If the TV worked normally for a period of time (months or years) and won't start, the most likely cause is bulb failure. There is no way to measure the bulb, sometimes the bulb is visibly damaged when it fails. Remove the Lamp Assembly and look at the bulb.

If there was an On-Screen Lamp Replace warning and TV won't start, bulb has failed.

The first step with all Panasonic Rear Projection TV "No Picture" problems is bulb replacement. If that does not remedy the problem, get a technician, there are no user serviceable parts. Guessing if the ballast, power supply, controller board or optical engine is faulty is not practical.

The Panasonic Lamp Gallery shows all Panasonic models and Lamp Numbers. There is also a link to Panasonic DIY bulb and lamp replacement.

easyab

May 05, 2011 | Panasonic PT-60LC13 60" Rear Projection...

1 Answer

Tv wont trurn on


Re-check the lamp door alignment. If the door is not installed properly, the interlock switch will open causing a no start condition. Also observe the red LED on the front panel. When you turn on the TV, a gree LED will blink on and off until the image appears. If the image fails to appear the green LED will give way to a red LED that will flash a specific number of times in between pauses. 3 blinks means the door is not installed correctly. 4 blinks means that a fan has stopped working, etc.

michtech

Feb 17, 2009 | Sony KDS-50A2000 50" HDTV

1 Answer

I have a 32" Insignia TV (IS-LCDTV32. In normal operation, when TV is off, the LED on the front is solid red. In normal operation when I turn teh TV on, the LED turns blue and the TV turns on. In the...


If your LCD is less then a year old, I would suggest to contact the manufacturers to have it fix under warranty.
The failure on your LCD could be a defective back light inverter or a power supply not providing enough power to the back light inverter board.
Let me know if you require further assistance.

Oct 14, 2008 | Projection Televisions

1 Answer

Flm-373b lcd tv will not turn on. red light turns to blue but wont come on.


There is a guy who fixes that tv at www.mikecampagna.com/Polaroid

Jun 10, 2008 | Projection Televisions

1 Answer

My 60" lcd projection tv wont turn on sometimes and throws a lamp light, and if i watch tv for a while and turn it off it wont turn back on and throws the red lamp light


The buzzing sound you most likely hear is the ballast trying to fire up the lamp. I would say replace the lamp and yes they can act up at will. If this is the first lamp replacement ever then you are doing good.

Feb 01, 2007 | Hitachi 60V500 60" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...