HI can't conect to interten my router netgear

Hi go to this link to know how to access the Netgear WPN 824
Manual for WPN824 http://documentation.netgear.com/wpn824v2/enu/202-10122-01/wpn824v2-04-06.html

Go to routers home page.
Find wireless settings and set to activte or turn on.

If you can access the router setup page, the best way to boost the signal is to change the wireless channel on the router setup page to a higher channel so the signal will be strong...

locate the black button at the back of the router. This is the switch for the blue light on top of the router.

I just got my Netgear 824 and I was able to connect to it with my pc and my wifi enabled phone but not with my ibook. Solution: when entering the WEP password enter a $, dollar sign, before the WEP password. I tried it and it worked like a charm.

LOL you bought it, you get to figure out how it works.

I used a MAC for a day, and the owner had to tell me how everything works. If you can get to the internet, I imagine you can go to www.routerlogin.com and get access to the Netgear. The Wireless Settings tab on my Netgear brings up text sensitive help on making security and wireless work.

Carl

Are you trying to setup your router? If so..
Here is a list of Netgear WPN 824 Models. :) USERNAME PASSWORD

Netgear WPN824 v2 (Netgear Firmware) admin password Netgear WPN824 v3 (Netgear Firmware) admin password
Netgear WPNT834 (NetGear Firmware) admin password

to set upa network

http://lifehacker.com/software/wifi/geek-to-live-set-up-a-home-wireless-network-162754.php

there is no "earthnet" connection. it is an ethernet connection. it looks like a phone cable but has larger ends than a phone connector. the router is connected to the computer via an ethernet cable if it needs to be hardwired to a ethernet port or internal ethernet card. a wireless connection only needs to be an add-on internal card w/antenna or a usb connector hub (it looks like a usb flash memory stick)

here is how it's done. netgear has the same type setup.

http://lifehacker.com/software/wifi/geek-to-live-set-up-a-home-wireless-network-162754.php

Is the smart setup (that is automatic setup) does not work, call your internet provider for the exact details (unless you have them) and do the manual setup.
You will save time.

DSL uses PPOE, which may be different than what you had previously. Cable, for example, uses TCP/IP.
Re-set the router to defaults, and follow the instructions for PPOE, which should be in your manual or setup disk. Your ISP may have this info on their site, or you can get it at the Netgear site:
www.netgear.com