Question about Bosch WFMC2100UC Nexxt Essence Washer

1 Answer

Draining Problem How about for Frigidaire brand washers? Where do I open to access any clogs??

Posted by on

  • Anonymous Jul 25, 2008

    Water is not draining and giving me an e04 error

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Check filter or pump

Posted on May 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WILL NOT DRAIN OR SPIN


Hello,

Remove any kinks in the drain hose. Ensure that the washer is not sitting on the hose.

Inspect the household drain. Remove clogs, if possible. Call a plumber if you cannot remove the clogs.

Check the drain and make sure there is an air gap between the hose and drain. An air gap is necessary to prevent the drain hose from siphoning water.

Clean the pump filter. Open the pump access door. Turn the pump filter counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.

Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining.

Allow the washer to cool down for two hours. If the washer overheats, it will stop the motor and cool down before restarting.

Close the door completely. The washer will not operate if the door is not securely closed.

I hope the above helps.

Good luck.

Jan 04, 2012 | Frigidaire FTF2140FS Front Load Washer /...

1 Answer

Water is not draining.is something clogged?


Hello,

below are some troubleshooting tips that might help to solve the problem;

Remove any kinks in the drain hose. Ensure that the washer is not sitting on the hose.

Inspect the household drain. Remove clogs, if possible. Call a plumber if you cannot remove the clogs.

Check the drain and make sure there is an air gap between the hose and drain. An air gap is necessary to prevent the drain hose from siphoning water.

Clean the pump filter. Open the pump access door. Turn the pump filter counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.

Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining.

Allow the washer to cool down for two hours. If the washer overheats, it will stop the motor and cool down before restarting.

Close the door completely. The washer will not operate if the door is not securely closed.

I hope the above helps.

Good luck.

May 13, 2011 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

Frigidaire Front Load washer will not drain nor spin? Help! Washer will start and water will enter unit, however clicking occurs and no spin of clothes.


Hello,

Remove any kinks in the drain hose. Ensure that the washer is not sitting on the hose.

Inspect the household drain. Remove clogs, if possible. Call a plumber if you cannot remove the clogs.

Check the drain and make sure there is an air gap between the hose and drain. An air gap is necessary to prevent the drain hose from siphoning water.

Clean the pump filter. Open the pump access door. Turn the pump filter counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.

Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining.

Allow the washer to cool down for two hours. If the washer overheats, it will stop the motor and cool down before restarting.

Close the door completely. The washer will not operate if the door is not securely closed.

I hope the above helps.

Good luck.

Mar 12, 2011 | Frigidaire Washing Machines

1 Answer

Not spinning or draining water


Hi,

Remove any kinks in the drain hose. Ensure that the washer is not sitting on the hose.

Inspect the household drain. Remove clogs, if possible. Call a plumber if you cannot remove the clogs.

Check the drain and make sure there is an air gap between the hose and drain. An air gap is necessary to prevent the drain hose from siphoning water.

Clean the pump filter. Open the pump access door. Turn the pump filter counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.

Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining.

Allow the washer to cool down for two hours. If the washer overheats, it will stop the motor and cool down before restarting.

Close the door completely. The washer will not operate if the door is not securely closed.

I hope the above helps.

Good luck.

Jan 11, 2011 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

Cycle won't start. The light is on and you can hear a sound like it's on but it won't take water or spin.


Hi,

Remove any kinks in the drain hose. Ensure that the washer is not sitting on the hose.

Inspect the household drain. Remove clogs, if possible. Call a plumber if you cannot remove the clogs.

Check the drain and make sure there is an air gap between the hose and drain. An air gap is necessary to prevent the drain hose from siphoning water.

Clean the pump filter. Open the pump access door. Turn the pump filter counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.

Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining.

Allow the washer to cool down for two hours. If the washer overheats, it will stop the motor and cool down before restarting.

Close the door completely. The washer will not operate if the door is not securely closed.

I hope the above helps.

Good luck.

Jan 10, 2011 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Water won't drain from the tub, think the hose may be clogged. Is there any way to clean the hose without completely dismantling the machine? It does spin but the water won't completely drain out. We...


Hi,

Remove any kinks in the drain hose. Ensure that the washer is not sitting on the hose.

Inspect the household drain. Remove clogs, if possible. Call a plumber if you cannot remove the clogs.

Check the drain and make sure there is an air gap between the hose and drain. An air gap is necessary to prevent the drain hose from siphoning water.

Clean the pump filter. Open the pump access door. Turn the pump filter counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.

Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining.

Allow the washer to cool down for two hours. If the washer overheats, it will stop the motor and cool down before restarting.

Close the door completely. The washer will not operate if the door is not securely closed.

I hope the above helps.

Good luck.

Jan 10, 2011 | Frigidaire FWS833A Top Load Washer

1 Answer

It drains but does not spin out


Hello,

Remove any kinks in the drain hose. Ensure that the washer is not sitting on the hose.

Inspect the household drain. Remove clogs, if possible. Call a plumber if you cannot remove the clogs.

Check the drain and make sure there is an air gap between the hose and drain. An air gap is necessary to prevent the drain hose from siphoning water.

Clean the pump filter. Open the pump access door. Turn the pump filter counter-clockwise and remove it. Remove dirt and debris. Replace the filter and close the pump access door.

Rearrange the clothing in the load. An unbalanced load can prevent the washer from spinning or draining.

Allow the washer to cool down for two hours. If the washer overheats, it will stop the motor and cool down before restarting.

Close the door completely. The washer will not operate if the door is not securely closed.

I hope the above helps.

Take care.

Jan 10, 2011 | Frigidaire GLTF2940E Gallery 3.5 Cu. Ft....

1 Answer

I have a Frigidaire Crown Front loader washer, model number CWS3600AS1. The washer is not draining during spin cycle. I suspect the filter, but am not sure how to locate and replace this part.


The problem is probably the pump being clogged with an object. Typically it is a coin.
Remove the front bottom cover to access the pump. Remove the two hoses. Make sure you have a pan to catch the water from the hoses. You will be able to remove the objects after the hoses are removed.

Jun 16, 2009 | Frigidaire CWS3600AS Top Load Washer

1 Answer

WONT DRAIN


clean the pump and also make sure that the pump motor is powered during draining

May 30, 2009 | Frigidaire GSTF1670A Front Load Washer

1 Answer

Washer not draining water


If the machine does not drain start checking the drain hose.

Ifthe drain lines are not clogged, then you will need to access to thedrain pump, and clean it , or replace it if it is not working.

Machine not draining can also be caused by a defective timer control, but this is rather unfrequent.

See also : It won't drain

This seller also have replacements and delivers worldwide.

Dec 28, 2008 | Frigidaire FEX831CS Top Load Stacked...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...