Question about Panasonic KX-T7730 Corded Phone

1 Answer

Changing time I have tried all the examples on the website, and none of them have worked for me to change the time on the display. Any suggestions? It is for a Panasonic KX-T7730. Thanks!

Posted by on

  • Anonymous Mar 11, 2008

    Does anyone know how to change the tim on a Panasonic KX-T7731?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 113 Answers

If you are using the KX-T7730 phone on a Panasonic 308/616/824 system. From the Switcboard / Main telephone ( ext 101, 10 or 9 ) with the handset on the cradle/hook press Program * # followed by the system password ( default is 1234). Now press 000 and then Sp-Phone.Enter the year and then scroll to the month with the right scroll key (located at the right bottom corner of the phone). To change the month use the AUTO ANS / MUTE button. Now scroll right again and change the date and day. To change the day again use the AUTO ANS / MUTE button. Now scroll right again and the time will appear. Set the time. To change am/pm scroll to it and again use the AUTO ANS / MUTE button. Press Program to exit program mode and you are done.
Please rate this answer if it was helpfull.
Thank you.

Posted on Mar 23, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is my facebook displaying in mobile mode on my desktop?

Yes,this is a problem with internet explorer 8.1 and 11.I will suggest you to change the browser or with this steps
1. Navigate to the website that isn't displaying properly.
2 . Go to the top there is menu bar
3 . A menu with File, Edit, View, Favorites, Tools and Help should appear.
4. Go to tools and open "Compatibility View Settings". "Add this website" should have the domain of the site you've visited already filled, so click "Add".
5. Close the windows then refresh the website that wasn't displaying properly. It should hopefully now display as it should.

Apr 30, 2015 | ASUS Computers & Internet

1 Answer

Top cotton not picking up bobbin cotton

try changing the needle
rethread the machine top & bobbin
make sure the bobbin is inserted correctly into the bobbin case
if none of these suggestions work, then it's possible that the machine
could be out of time & would need to be checked at a sewing machine

Aug 21, 2012 | Singer Sewing Machines

1 Answer

How to thread the bobbin through

try changing the needle
rethread the machine top & bobbin
make sure the bobbin is not warped
if none of these suggestions work it's possible that the machine
could be out of time & needs to be checked at a sewing machine

May 30, 2012 | Sewing Machines

2 Answers

Nokia6230 whait lcd

(There are different types of problem that display white screen)
Example 1. LCD (try by changing a new LCD)
2. Patta (try by changing a new Patta)
3. Software (Flashing)
The best way is refer to the nearest mobile service centre for your problem.

Thanks for using FixYa
All the Best!

May 24, 2012 | Nokia 6230i Cellular Phone

1 Answer

I am trying to run a HP desktop pc that has not been booted up in 7-8 months. It has been in storage for that length of time. When it begans to boot it keeps coming up with disk boot failure insert system...

You need to change the cmos battery on the main board.
When the battery runs out of power the bios can not remember the settings.
The battery is a 2032 watch type 3 volts.
Its easy to change.
When you have changed the battery enter the bios
and configure the boot configuration:

Just below where you set the date and time you can define the specifics of your hard drives and other storage devices installed in the PC. Each time the PC boots, it most likely has to auto-detect and determine what storage devices are installed on the system. While this takes only a second or two on most systems, if you define these specifics rather than use auto-detection, your boot-up will be that much quicker.
To do this, simply select the drive, usually by highlighting it and pressing Enter. Then write down the numbers currently displayed for the Cylinders, Heads, Sectors, and LBA. On some BIOSes, you'll also have options for Block Mode as well as 32-Bit Transfer Mode. Change the drive type from AUTO to USER. Then key those numbers and options in exactly as they were displayed. On most modern computers, you will want LBA Mode, Block Mode, and 32-bit Transfer Mode all turned ON for your hard disk drive, even if they weren't before.
If there is no device attached to any one of the four possible drive location combinations, select NONE. For example, if you have one hard drive configured as a Primary Master and one CD-RW configured as a Secondary Master, be sure to set both the Primary and Secondary Slave options to NONE. If you leave the AUTO setting where there is no device, the computer will always look to see if a device is plugged in at that location each time the computer boots. By changing this setting to NONE, the computer will boot slightly faster.

Mar 10, 2011 | Computers & Internet

1 Answer

System Date Problem in EEE PC 1005HA

As if you have tried changing the date & time in your control panel plus BIOS.There is nothing left to be done regarding changing date & time.
But If your CMOS battery in the motherboard fails,it will always goes back to it deafult date & time.Replace the battery and it will solve your problem.

I recommend to use Sony Lithium Battery

Dec 21, 2009 | ASUS Eee PC 1005HA-PU1X-BK Netbook

1 Answer

My Xda Zinc displays no network service all the time. I already tried changing sims but none of them has network signal. i tried the soft and hard resets but still doesnt work. I cannot call, txt and even...

My Xda Zinc displays no network service all the time. I already tried changing sims but none of them has network signal. i tried the soft and hard resets but still doesnt work. I cannot call, txt and even received messages. need your advise. pls. help.

Nov 06, 2009 | O2 Xda Zinc Cellular Phone

1 Answer

I own insignia 27" lcd input vedio keep changing none stop

Check to see that none of you manual buttons are sticking or stuck, especially INPUT !
If none are stuck and your set is still under warranty please return it.
If not under warranty I would suggest taking to a local service center that is familiar with Insignia.

Feb 17, 2009 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Change the time

Depending on the software of the Norstar it is connected to, you would log in to the key system by using Feature **23646 and then follow it up with the administration password.

If this is a pre 1.0 system, i.e DR5.1 do the following. If not, go to the bottom and click on the link and find the manual for the system your phone is connected to. Generally the system coordinator guide will have what you are looking for.
Setting the date
Begin with the display showing

l.Sys speed dial
1. Press [NEXT] (second key from the top on right for a 7310) twice.
2. The display shows 3.Time and date.
3. Press [SHOW] (first key on the top on the right for a 7310)
The display shows the time, for example, Time 01:00.

- All times and dates must be entered using numerals. For
example, February would be entered as “2”.
- The time may be entered in either 12 or 24-hour format. If the
display is in English, and the hour entered is less than
thirteen, the display prompts you to specify “am” or “pm”.

Press [Show] This will open the time change function. Simple rule. If you want to modify a value, press [CHANGE] and you'll get a cursor. Once you're done with that entry, press [NEXT] to go to the Minutes, press [CHANGE] etc...

I have also included how to change the date below.
Press [Next].
The display shows the date, for example, Date 31 Mar 91.
4. Press CHANGE (softkey under screen). The display shows Year: 88.
5. Set the year.
a. Press CHANGE.
A cursor replaces the number on the display.
b. Enter the year using the dial pad.
For example, press a a to enter the year 1990. ?
c . Press [Next] The display shows the month, for example Month: 01.
6. Set the month.
a. Press [CHANGE]
A cursor replaces the number on the display.
b. Enter the month using the dial pad.
For example, press 02 to enter February.
c . Press [Next].
The display shows the day, for example Dar: 01.
7. Set the date.
a. Press CHANGE
: A cursor replaces the number on the display.
b.” Enter the date using the dial pad.
For example, press 14.

Apr 03, 2008 | NorStar M7324 Telephone

1 Answer

D600 Projector, Monitor Mirroring Problem

suggest you to go to dell support website and ask the solution there and i have also that problem because I own one . and try to configure your laptop at dell to determine the problems and yet to install programs and drivers . Good Luck!

Dec 02, 2007 | Dell Latitude D600 Notebook

Not finding what you are looking for?
Panasonic KX-T7730 Corded Phone Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 2 Expert

85 Answers

john milligan

Level 3 Expert

514 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides