Question about Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Television

Open Question

HDTV connection to Sony Wega

I have a new dvd entertainment system. I completed all the connections to my sony wega, and alas! no video.

I made the connection of the blue/ red and green perfectly. What might be the problem? Compatibility? is there any gadget i can buy that will not lessen the video quality?

I also tried connecting my PSP (I have the connection cable) to my TV, sound was good but no picture still. I also tried it to my other sony wega TV ( a newer version), same result.... no picture still. Its all about the TV i think.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 192 Answers

SOURCE: Component Video inputs do not work

I started back in the day of tubes. A family would have one set and it would be a 19" black and white. There are different resolutions now. The components probably do work, but, they don't pass the 480i signal. The satelite converter's analog signal needs to be set to 480p and the DVD needs to be set to progressive if it does have that setting. If the DVD is not a progressive scan DVD, then, the only inputs that it will show on is the analog signal. Some of the dish converters have a switch on the face for changing the resolution. If yours doesn't then put it in an analog source and go to the menu and change it there. Then move it to the component input. Hope this helps.

Posted on Jun 24, 2007

Ad
  • 96 Answers

SOURCE: Split screen question

Ah split screen just another way of getting two picture in one screen, or sport for he and Opra for her.
Fisrt you must understand what split screen is, it is taking two information from different source and sending the info to the micro to devide the info for two seperat image.
Well something like that but I know you were inpress,
Yes you can. Take the main source you or using I would say the TV box in cable connection or av1 and then your DVD or and VCR to source av2 or 3. When presing split screen or pip you will get one screen showing the main source your tv box and the second your dvd (or VCR) in the source input solector you should be able to change the second amage input with input solector and the tv box change the other.
Oh what a butiful life aint it.
Try this with 7 different source, Cable, satelite, fta, dvd, camera, gaming sytem, and computor,... well that another chapter.

What about Bob

Posted on Mar 01, 2008

  • 556 Answers

SOURCE: My Sony Grand Wega KDF-50WE655 Is blue at the

You have a bad light engine, sorry. Very expensive repair.

Posted on Nov 12, 2009

  • 8457 Answers

SOURCE: When I connect my Panasonic

U have a old version of firmware in ur cable box or ur cable pakage don't have HD service.Tries find out if ur subcribe package have HD serviced and trade in ur old cable box.Not ur tv or a cable box malfunctions.

Posted on Jun 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hdmi instructions


Hi Kelly,
I believe the Sony Trinitron WEGAs do not have an HDMI connection on the back of the TV. If they do it would be labeled as HDMI input below that familiar looking HDMI narrow horizontal connector. But I believe what you have is the RGB connector which looks like three round female connectors which are color coated Red Green and Blue. Now these RGB connectors are a form of high definition but it's not a direct connect for for your HDMI DVD player or your XBOX 360 or what ever you want to hook the TV up to.
You'll have to convert you HDMI to RGB. you can still purchase DVD players with RGB outputs but if you already have a device that requires a TV with HDMI, you can buy a converter. Go to RadioShack or BestBuy or search online for a HDMI to RGB converter cable . It should look something like the picture below.
RED GREEN AND BLUE for video. And then the white and red connectors that are banded together are for your audio.
Good Luck

25318506-1qrgv3iqrp0kidvuhlkcsjye-2-0.jpg

Dec 12, 2014 | Sony FD Trinitron WEGA KV-32HS420 32" TV

1 Answer

HD DVD connections?


you have1 hdmi connection, for video or the red green blue connections for video, and you'll need to use the red and white audio connections according to the info I got from the internet

Mar 07, 2013 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

Blue colors are now green.


It sounds connections are not matched yet. Make sure connections are green to green, red to red and blue to blue in dvd player and tv are correct.
Try another component video cable.
If problem still exist, test dvd player to any other tv, found ok then component input of this TV is bad, need to get it repaired.

Jan 24, 2010 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

How do i get my sons dvd player in color. it plays every movie in black and white


Make sure the connection to the TV is correct. Yellow(video) jack from the DVD player will go to yellow jack of the TV, white to white(audioL) and red to red(audioR) for compsite audio/video connection. Red to red, green to green and blue to blue for component connection.

Dec 29, 2009 | Sony DVP-SR200P DVD Player

1 Answer

Sony kv-36fv27 color is bad.


Know to solders?Resolder ur video board socket holes that connected to( CRT tv Tube).Resolders the Yoke cable red, green,yellow connected to the main board also.Should get colors back,if the colors IC on the video in not dead,and capacitors help the IC on the video board.

Dec 19, 2009 | Sony FD Trinitron WEGA KV-36FV27 36" TV

1 Answer

Best setup for Xbox 360 for Sony 32" Tube WEGA tv


Hi, Not sure whether you are kidding or not. You don't mention the tv model so I will try to help using a KV-32FS100 as an example. You really only have 2 choices assuming you have a current model xbox 360. The component cable that comes with the xbox has 6 connectors, a green, blue, red, yellow on one part and a white and red on the other part. On the back of the tv below and to the right of the s video connector are inputs labeled Y, Pb and Pr and are colored Y is green Pb is Blue and Pr is red if they aren't colored that is the correct order. Don't connect the yellow to anything. The red and white on the other part of the cable go directly to the right of these connections. It will say audio and L and R they should also be colored but if not white is L and red is R. There is also a small switch at the xbox end of the cablewhich you need to slide to HDTV. Once you are powered up don't forget to enter the setup menu on the xbox and select the settings for your tv. Again without knowing the model most wega tvs limit the component input to 480p which was the limit of a dvd. I hope this is helps.

Jan 28, 2009 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

Set up Sony Wega TV on Video 2 for a Wii system


In the set up screen: Video reset ports and activated them individually to allow the TV to recognize the game and the DVD players...

Dec 26, 2008 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

NO Blue Colors on any station/program


If you are using component video cablesm make sure the blue is connected from tv to source.

Oct 27, 2008 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

Trying to connect sony dvd player to hdtv


You will need some cables first. It's really not that difficult once you know what each cable does.

Since you're only connecting from the DVD player to a receiver, this should be simple.

There are 4 solutions depending on what cables you have.

Composite - Yellow, Red, and White ended connectors.
S-Video - Black 4-pin connectors.
Component - Green, Blue, Red and sometimes extra Red, White for audio.
HDMI - heavy cable with a wide/flat connector.

Composite connection - Connect the yellow end to the yellow Video Out of the DVD player and to the DVD Video In on the receiver. Connect the Red audio connector to the Red Audio out of the DVD player, the White connector to the White Audio out of the DVD player, and then connect those to the Red and White Ins for DVD Audio on the Receiver.

S-Video Connection - This is the same as the Composite video connection, but connect the black 4-pin cable into the S-Video out of the DVD player and into the In for DVD on the back of the receiver instead of using the yellow video cable. The S-Video cable is a video only cable and uses the same audio cables (the red and white ended cables) for audio.

Component Connection - On the back of the DVD player, connect the 3 video cables that are Red to Red, Blue to Blue, and Green to Green. These will be labeled Y for Green, Cb/Pb for Blue, and Cr/Pr for Red. Connect these video cables to the inputs of the receiver the same way Y for Green, Cb/Pb for Blue, and Cr/Pr for Red. The audio connection is the same as composite and there should be a place on the DVD player that will tell you what audio is for Component. This is also the same on the back of the receiver.

HDMI Connection - This one is the easiest to connect as your audio and video are in the same cable. Plug in your HDMI cable in the back of the DVD player (there should only be one) and then to the HDMI connection for DVD on the back of the receiver.

Now...once you have your connections made, turn on your DVD player, set your receiver to DVD, and enjoy.

If your receiver does not have video inputs, you will need to run the video lines directly to your TV while the audio lines go to your receiver. This will mean you will need to set the receiver to DVD as well as change the channel of the TV to the input you have the DVD player plugged into.

I hope this helps.

May 12, 2008 | Sony DVP-NS725P DVD Player

Not finding what you are looking for?

Open Questions:

0 Answers

Has anyone had problems with connecting an 'HDMI to HDMI + SPDIF + RCA L / R Audio Extractor Converter (HDMI input,HDMI+ Audio output)' to a Panasonic PT-53TW53? I have a TiVo Premiere hooked up to my Panasonic PT-53TW53. I use the HDMI out, and RCA R+L outputs on the TiVo, and hook up to the digital in connections on the TV. The conversion of the HDMI out is via an HDMI to DVI cable. This has worked perfectly for years, but recently I wanted to disconnect the TiVo and replace with my Roku or Amazon Fire TV. Both have a single HDMI output. So I purchased an AGPtek HDMI to HDMI + SPDIF + RCA L / R Audio Extractor Converter (HDMI input, HDMI+ Audio output) box, hooking up the HDMI output from the Roku or Fire TV to the input on the extractor/converter, and simply disconnecting the HDMI to DVI and RCA R+L outputs from the TiVo, and plugging them into the outputs on the converter/extractor. The converter/extractor has a 3 position switch: PASS, 2CH audio, or 5.1CH (via and SPDIF or Toslink cable). I have had 2 of these converter/extractors, and with both the Roku and Fire TV I got the same results with both converter/extractors: With the switch on 2CH, which is where I understand I should get HDMI video and 2CH RCA audio, all I get is the RCA audio. No video. If I switch to PASS I get video with no audio. Of course on the 5.1 setting I get nothing, since the TV does not support SPDIF. Yet I see reviews all over Amazon indicating folks are using this converter/extractor for this very purpose, and it is working fine. I can't possibly imagine that it is some sort of incompatibility issue with the TV, since the TiVo has worked (and continues to) fine for years. Any ideas?

Feb 28, 2017 | Panasonic PT-53TW53 53" Rear Projection...

See all Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Questions

Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Television Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...