An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: non working of lcd
Hi this is the way how to examine what's wrong with your LCD
monitors. Power on both CPU and monitor. After it went blank, you have to
check if you can see the image on the screen or not by shining a flashlight into the
screen, not directly but find the best angle to the screen and take a look very
closely. If you can see the icons or any image, there will be a minor problem.
Like me, I can see window image using flashlight and check lamps inside. Some
of them were broken and it is easily replaced. If you cannot see anything on
the screen, there'll be some problems with inverter board. If you have
soldering tool and want to fix it by yourself, check the caps first. It may
cause this problem. Some caps might show leaking or burn spot on the board
because of too high temp. If you don't have soldering tool, you better go get a
technician to do so.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi Atul hope this solution works 1. kindly check if the num lock is on(there is a light on it) 2. check as well if the numbers in the keyboard is working and as for your request here are the list of the service center(official) for lenovo
Surat Redington India Ltd
Office No.4,5,6 Bhavik Apt,
Opp L.B.Park,Ghod Dod Road,
My name is Bhargav motorola v3 mobile purchase in amerika but my home in india (gujarat - surat) my motorola problam in not support all sim mobile on to display error in unregister sim please my problem soll my contact no 9016893902 Thank You sir
It might be the connection loose of power cord problem or check your TFT power connector inside the TFT if you can open the TFT screen!!! It may be dry solder…. Other wise go to repairer and do the same….!!!
The LCD monitor is actually a active matrix of small transistors (3 for each pixel). They have one native resolution, a FIXED one for example you monitor has 1024 x 768 pixels. This results in 786432 pixels displayed on the screen. Because each pixel is controlled by 3 transistors there will be 2359296 transistors controlling your entire screen. This is a fix number. You can't raise the resolution to 1280 x 1024 because this will require as you can see now... a lot more transistors on the same surface.
All you can do is to lower the resolution, in this case 4 pixels (12 transistors) form a larger pixel acording to that lower resolution. The image can look blurry in these situations.
THe bottom ideea is that a LCD pannel (more corectly said, TFT (thin transistor film) pannel, has one optimum resolution, it's native one. The higher the better, when choosing one to buy, but you can't raise the resolution over that. You can just lower it.
It works different then the normal conventional CRT monitors.
Sorry for my bad english as I live in a non english-speaking country. Also if you have anymore questions please post a comment.