Question about Epson Stylus Photo R300 InkJet Printer

1 Answer

Problem says part of printer is end of service life please check and both red lights blinks simultanously.

Posted by on

  • Patrick Michaels
    Patrick Michaels May 11, 2010

    well..I'd pay some pretty good attention to that..that's a pretty smart printer, if I do say so myself.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

This happened to me and cost me £1 to get a fix from ebay. so here it is for free. The ink pad under where the printer head parks is full.Turn the printer on. Hold the stop maintenance and power buttons down for about 10 seconds. You will hear a horrible grinding noise. PULL OUT THE MAINS CABLE. Turn the printer back on and pull the mains cable out when the head moves to the left. Use kitchen roll to soak up lots of the ink. Use kitchen roll to soak up the ink about once a month. Worked for me for over a year now
STEVE

Posted on Mar 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My epson 1410 blinks 2 red light whwn i turn it on. Please help


If power button is on (not blinks) and two red lights are blinking alternatively it means the inkpads are end of life. Ask epson service centre to reset it and replace the ink pad. You can go for wic reset with fees.

If power button is blinking with two red lights, it means your printer cannot initialize. Its a fatal error. Ask epson service engineer to service it.

Oct 27, 2016 | Epson Office Equipment & Supplies

1 Answer

Epson stylus 1410 both red light blinking


Thank you very much Edgar, you saved my day!
definitely voted for! big thumb up!

Jul 22, 2012 | Epson Stylus Photo 1410 Printer

1 Answer

After turning on the printer both red lights blink and the paper and ink seem ok


Take the scrap paper with the pads on to your sink, turn on the hot tap and hold .... And the printer is not Ready and the two red lights are blinking Please Give ... C46an isn't off but both green and red lights are flashing (new ink was put in .... Nothing seems to happen, except for the printer going through its ...
www.hm2k.com/.../parts-inside-your-printer-are-at-the-end-of-their-service-life

Dec 03, 2009 | Office Equipment & Supplies

1 Answer

My Epson Stylus R230 has both red lights blinking alternately do you know how i can fix this please??


google ssc service utility - your printer has reached its end of service life and needs to be reset - download the utility and reset the printer.

Nov 13, 2009 | Epson Stylus Photo R200 InkJet Printer

1 Answer

My Epson Stylus T10 Printer have a problem...it indicates, (Service Required):"Parts inside your printer are at the end of their service life. See your printer documentation." then the two light (red &...


The waste ink pad needs to be replaced or cleaned AND the service software used to reset the internal counter. You cn download tthis online.

You have to dis-assemble the printer to get at the pad. You can clean the pad with agressive rinsing till it is a very light gray color. (A lot of ink will be flushed out!)

Oct 23, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Green & red light is blinking


If you try to print and it say "end of service life ........thing" . You have to reset the printer counter to 0 count.

Use a third party software for this, key in in your web search bar " epson reset software" the upper most link is the one, try to read the procedure.

Hope you get it easily.

May 25, 2009 | Epson Stylus C43SX InkJet Printer

2 Answers

Hiw do I reset the


The following conditions can cause the On Line LED to glow:

* Printer paper is jammed inside your printer.
* A cover is not be closed properly.
* The toner cartridge is not inserted properly and needs to be reinstalled.
* The toner cartridge is running low.
* There is no paper in the paper tray.
* The paper inside the paper tray is not be installed correctly.

Red Error Light Blinks

If your printer's On Line LED is blinking red, your printer's toner is exhausted and needs to be replaced. For replacement cartridges, please click here to visit our official online parts distributor.
On Line and Error Light Blink Simultaneously

If your printer's On Line and Toner Save LEDs blink simultaneously, your printer requires service

Apr 14, 2009 | Samsung ML-1640 Monochrome Laser Printer

2 Answers

Samsung printer ml 1510 red light flashes after self test


Red Error Light Stays On The following conditions can cause the On Line LED to glow solid red:
  • Printer paper is jammed inside your printer.
  • A cover is not be closed properly.
  • The toner cartridge is not inserted properly and needs to be reinstalled.
  • The toner cartridge is running low.
  • There is no paper in the paper tray.
  • The paper inside the paper tray is not be installed correctly.
Red Error Light Blinks If your printer's On Line LED is blinking red, your printer's toner is exhausted and needs to be replaced. On Line and Error Light Blink Simultaneously
If your printer's On Line and Toner Save LEDs blink simultaneously, your printer requires service.

You can go to samsung online service request http://www.samsung.com/us/support/repaironline/supportOnlineServiceRequest.do

Mar 21, 2009 | Samsung ML 1510 Laser Printer

1 Answer

EPSON PRINTER R22O


Hi-

yes actually there is. the parts its talking about is the inkpad, you can send this over to an epson certifies servicer in your are to have inkpad change and they will reset the counters for it. go this link and look for a servicer near your place
http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp?BV_UseBVCookie=yes

or you can contact epson at 562-276-1300

pls rate as fixya if helpful. thanks!!

Jun 21, 2008 | Epson Stylus 2200 InkJet Photo Printer

5 Answers

EPSON PRINTER R22O


display This massages Parts inside your printer are near the end of their service life.
See your printer documentation.

Nov 08, 2007 | Epson Stylus Photo R320 InkJet Printer

Not finding what you are looking for?
Epson Stylus Photo R300 InkJet Printer Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Cindy Wells

Level 3 Expert

4950 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...