Question about Washing Machines

2 Answers

Clothes are excessivly wet the washes does not seem to spin

Posted by on

  • 1 more comment 
  • wprodigy Mar 12, 2008

    all cycles work except the spin cycle

  • sleeklink Apr 08, 2008

    Our front loader washer is stopping three or four times during the wash cycle, and either

    1) won't spin leaving the clothes, towels, and sheets completely soaked,
    2) or will just spin very slowly and everything will be rather wet still.

  • thill1999 Mar 12, 2009

    After the rinse cycle completes then the spin cycle seems to start but then smells liek something is burning.......clothes are soaking wet when cycle ends.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Water pump blockage. Ours does the same thing. Most of the time for me I find the money in the pump, take it out and put back together and it works.

Posted on Apr 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

One of two issues...control board behind timer, or timer itself..

none of cycles work, right?

Posted on Mar 11, 2008

  • Patrick Michaels
    Patrick Michaels Mar 12, 2008

    thankya for using fixya

    so, the spin cycle is controlled on the circuit board, along with a few relays(also on the board) sounds like you need a new one.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Clothes still wet after spin


it is normal for clothes to be a bit wet after spin.approximately about 80 percent of your clothes will be dry after spin. you may hang your clothes to completely dry or place it inside a drier machine

Sep 03, 2015 | Maytag Bravos 3.8 Cu. Ft. Washer

1 Answer

WSM2480 Clothes Still Wet After Slow Spin Cycle


It's possible that the tub didn't drain properly in the allotted time and the remaining water is slowing your drum from coming to maximum extraction speed.

Jan 10, 2014 | GE WSM2420D Unitized Spacemaker Washer /...

1 Answer

Washing machine does not spin well and leaves the clothes soaking wet


Likely a bad belt or tensioner causing it to slip. Take it apart and look to see what the belt is doing or call a repair man.

Apr 22, 2012 | Whirlpool Washing Machines

1 Answer

Clothes are too wet when finished washing. water drips from clothes.The spin cycle seems to be spinning as the clothes are against the outside wall of the tub. we have the extra spin cycle used aslo and it...


Transmission is bad. Buy new washer. Best brands are (Kenmore, Whirlpool, Maytag).
Thanks and Please Rate me! Tips provided by www.HoustonRefrigeratorRepair.com Brian Gillespie (GOFAR Services, LLC)

Aug 26, 2011 | GE WPRE6150HWT

1 Answer

Washing machine 11 years old is jumping on the wash cycles. EG instead of taking 25 mins its taking 10 mins to complete -clothes coming out wet unless manually turn to spin again


It is possible that the program is not running to the designed settings and so the program seems to skip the cycle.
The clothes come out wet because the spin cycle is not activated in the set program. Hence the program controller needs a check.

Jan 17, 2011 | Hoover Washing Machines

1 Answer

Whirlpool LSR7010PQ2 can't spin dry, clothes still wet


If it was spinning slow before the total failure It would be your clutch ,Check your lid switch.

Apr 24, 2009 | Washing Machines

1 Answer

My clothe come out very wet at the end of the wash cycle


If the pump is clogged and can't release all the water it won't go into final high spin. Remove lower cover and locate coin catch and unscrew it. Water will come out, so be ready. If it's full of stuff, this is probably the problem.

Mar 13, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Wet clothes at end of spin cycle


sounds like your transmission is not working properly. check your warranty information. (should be in your owners manual) many of the whirlpool made top loaders came with a 5 year warranty on the transmission/gear case

Dec 29, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Series 70 kenmore elite washing machine


If it goes through the complete cycle o.k. except for the slow spin then the motor itself needs to be checked.

Mar 20, 2008 | Kenmore 24622 Top Load Washer

1 Answer

Broken washer/dryer


This sounds like a motor control board is faulty. Please load a couple of towels in the machine run it. Watch the machine as it goes through its' cycles.

1. Do the towels tumble when the machine is washing ?
2. When it begins to spin, does it spin one way at a fast pace or does it spin one way and then the other ?

Answering these two questions will help in troubleshooting your problem.

Jan 07, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...