Question about Toshiba TZ50V51 50" Rear Projection Television

2 Answers

No audio or video

Solid red light for a couple of seconds and then it blinks constantly. no pic or sound

Posted by on

  • greg r
    greg r Mar 13, 2008

    This seems to be a "common" problem,, a friend has the same thing with his
    TZ50V51. Red light,,, then red blinking light,,, then on shutdown, you do see a quick flicker on screen. Some times ,, you can not turn off/shutdown, red light stays flashing until you unplug unit.

    Has anyone found and fixed this problem ?

×

2 Answers

Is this the link to the manual ?
http://servicemanuals.vstore.ca/product_info.php/pName/toshiba-projection-power-supply-shutdown-circuits-h1595605/cName/toshiba

This will show how to troubleshoot this problem, and recommend which part or circuit board is faulty ?

Posted on Mar 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 8,617 Answers

Your set is going in to protective shutdown something in the start up voltages. This is something you would need a manual for. I have a linkt that has the start up circuit and shutdown diagnosing for your set if you would like me to post a link let me know

Posted on Mar 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When charging the red light will cycle 7 seconds on then 2 seconds off and constantly repeat this cycle. However, the instructions state when charging the red might will stay on until fully charged. What...


Sounds like battery is no good There should be symbols on charger. Normally solid light charged. Blinking. Charging. Lights back and Foward battery. No Good won't accept charge

Mar 25, 2015 | LG HBS-700 Bluetooth Headset

1 Answer

Two of my smoke alarms went off (no fire/smoke in or near house), one has a green light blinking and one has a solid green light, which need a new battery/reset?


The constant green LED means the alarm has AC power.
A flashing green light every 2 seconds without an audible alert means the unit recently sounded ( was the one activated ) and is now in latching mode to let you know that it was the unit that detected the problem. To clear the latching mode hold down the test button for 5 seconds.
Red LED flashing once per minute means that the back-up battery is connected and functioning.
Red light flashing constantly during alarm means that it is the unit that initiated the alarm siren.

Sep 04, 2014 | Cars & Trucks

1 Answer

Kenwood A722L no sound and volume led blinking


This could be due to a faulty speaker relay (if your unit uses one). Normally, the unit will "wait" a couple of seconds after you turn the unit on. Then you will hear a "click" and the sound will begin coming through the speakers. If the relay is faulty, it would cause the problem you describe.

Aug 01, 2014 | Kenwood Audio Players & Recorders

1 Answer

Has solid red status button, no sound or picture


check cables in the back properly hooked - audio to audio and video to video. colour code may help.

Nov 06, 2013 | Mitsubishi WD-65638 65" DLP HDTV

1 Answer

Mitsubishi projection T.V


check the lamp first to see if intact or shattered.

Mar 31, 2012 | Mitsubishi Televison & Video

1 Answer

Solid red light on sony grand wega kdf-e60a20


it is possible the issue is in the audio circuit===seen a couple with a shorted audio output that did that.

Mar 12, 2012 | Sony Grand WEGA KF60WE610 60" Rear...

4 Answers

XBOX360 No Audio, No VIdeo, Solid Green Light


the G.P.U has more than likely detached from the main board.
the x clamp mod is more of a diagnostic procedures than an
actual repair function. The G.P.U will need to be re-flowed to
the main board then lightly but firmly clamp to the board
then stress tested (force it to run hot for 15 min shut off and
repeat 3 times)

that's it

Aug 23, 2009 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Toshiba TZ50V51 50" Rear Projection Television Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...