Question about Office Equipment & Supplies

1 Answer

Identify power adapter for extended systems ESI 2831

I have a pocket PC card extended systems ESI2831that I have not used in seveal years. Unfortunately the power adapter was separated from it. I've got quite a number of them. Can you help me identify what it is, or at least the wattage? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Try epson.com may be in their specs

steve

Posted on Mar 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset ESI 2833 until red light turned green. Network Printer still not responding


Check the IP Address of the 2833. I believe there is a gray button you can depress to print out a configuration sheet. If the wireless modem was also your router, you may have a different IP address range and will need to set the 2833 accordingly.

Sep 03, 2013 | Extended Systems Pocket Print Server

1 Answer

SAN-2U3PCIE will not see drive


You need to identify the Operating System and version to make it easier for someone to look into this. You might also mention the system brand and model, mainboard make and model for non-name brand. Identify which slot the card is plugged in to.

If it is Windows, does the Hardware see the card ? (Hardware Manager is usually under Properties when you right-click on My Computer).

Check that the card (always power off and unplug the system, I had a neighbor who 'hot swapped' cards in his PC - Oh that guy!) is properly seated (pushed down) and that there is power connected to it (that is a power connector at the rear top edge, right?).

You might also try the card in another PCI slot, in case the one you have used is a problem.


If the card is not recognized, you may need to return it for a replacement. Remember that you wore a grounding strap when you installed it. (nudge nudge wink wink) You followed the installation instructions to the letter.

Does the computer recognize any other USB devices plugged in to the card? (If not, card might be bad). [mice, webcams, flash drives]

Does the drive connect to your slower USB ports (system probably tells you it is a slower port) ? If it works on another USB port, the drive is OK. It is OK to use a different PC to check this because you are checking the drive not the PC here.

The download link for the installation guide did not work for me. I did not see any drivers available for download.

Sep 20, 2012 | Sans Digital HA-SAN-2U3PCIE 2-Port...

1 Answer

I need a AC Adapter Kit for the Extended Systems PocketPro Print Server ESI-7000RX


Some are proprietary and can only be obtained from the manufacturer or dealer. Go to their web site and look at the accessories available.

Mar 06, 2011 | Extended Systems PocketPro Print Server

1 Answer

How do i insert my sim card into the pocket pc xv6700 phone


The XV6700 phone is on the verizon network, thus uses CDMA technologies,

Unlike CDMA, GSM uses SIM cards to identify the handset.

In short: the pocket pc XV6700 cant accept a SIM card, sorry!

Thanks,
Mike

May 17, 2010 | HTC Verizon XV6700 Cellular Phone

1 Answer

How to reset Pocket Print server Extended Sys ESI 2833?


Disconnect the power. Press the small test button and keep it pressed, while you reconnect the power AND wait until the green LED is on again.

Dec 05, 2008 | Extended Systems PocketPro Print Server

1 Answer

Palce where to insert sim card


It's not a phone. It's a pocket PC.
CAUTION: For synchronization to work properly, install Microsoft
ActiveSync on your personal computer before you connect your
iPAQ Pocket PC to your computer.
To install a CompactFlash (CF) or Secure Digital (SD) card into
an expansion slot on the iPAQ Pocket PC:
1. Locate the appropriate slot on the top of the iPAQ Pocket PC.
To identify slot locations, refer to the Getting Started
document that came with the iPAQ Pocket PC.
2. Before inserting a CompactFlash (CF) card into the CF
expansion slot, pull the plastic slot cover from the CF slot.
3. Insert the expansion card into the appropriate expansion slot
and push the connection edge of the card firmly into the
expansion slot.
✎If your expansion card is not recognized, follow the card
manufacturer’s instructions to install it.
✎For more detailed help, refer to the Help files installed on your
iPAQ Pocket PC. From the Start menu, tap Help > Connections.
✎To prevent power loss, remove any expansion cards from either
the CF or SD expansion slots before turning off the iPAQ
Pocket PC.
44bf6e2.jpg Your iPAQ Pocket PC supports 802.11b Wireless LAN (WLAN) technology using the expansion slot in the top of the device. Figure 1: Expansion slot c00059391.jpg To make your Pocket PC a WLAN device, you need:
  • To purchase a WLAN CF or SDIO expansion card
  • To have access to a wireless network

Dec 29, 2007 | HP iPAQ H2215 Pocket PC

1 Answer

ExtendNet Pocket Printer ESI-2841 - Link Light fails to come on.


Did you connect it hrough a swirch with a network cable, or to a pc with a crossover? It is not a smart adapter, can't do midi or tx.

Oct 31, 2007 | Troy ExtendNet SX Print Server

3 Answers

ESI-2831 Drivers missing


Here is a Manual. As for the drivers came up short on them sry. www.nls.com/common/pdfs/v307n10.pdf

Apr 19, 2007 | Extended Systems Pocket Print Server

1 Answer

Can't find printserver on the network


Most Print Servers are by default on DHCP and if the PS is still on its factory defaults, it won't get an IP address because your computer won't have a DHCP server (unless u have set up one). Now, you can ask the person you got it from if he had ever assigned a static IP Address to the PS. Also, one of the reasons why your laptop won't detect the PS might be a software firewall installed. Please revert back with any other questions or observations. good luck

Mar 23, 2007 | Extended Systems Pocket Print Server

2 Answers

Cannot find print server at all


How this works: Restoring the PocketPrintServer to Factory Defaults In most cases, the best way to restore the PocketPrintServer to factory defaults is through "telnet". However, if you are unable to connect to the device because of a configuration error, use the following method which does not require a network connection. To restore the PocketPrintServer to factory defaults, complete the following steps: 1. Disconnect the PocketPrintServer from the network and power cycle it. When it powers up, the LED will rapidly blink orange for five seconds. 2. Power down the device during the rapid orange blink period. Power up the device and power it down during that orange blink period two more times. 3. Reconnect the network cable and power up the PocketPrintServer. It will have restored itself to factory defaults and will rapidly blink green as it searches for a RARP or BOOTP server to find an IP address. Gleaning If an IP address has not been permanently assigned when the PocketPrintServer is powered on or reset, it will look for a "ping" packet on the network. If the PocketPrintServer receives a "ping" packet within two minutes, it will accept the IP address in the "ping" packet as its own address. To use Gleaning, you must have super-user privileges on a UNIX system. Gleaning also works under Windows 95 and Windows NT. 1. Add an entry in the ARP table that assigns an IP address to the Ethernet address of the PocketPrintServer. To do this, use the "arp" command. arp -s temp Example: arp -s 192.168.42.24 00:02:16:00:00:01 temp 2. Start a continuous "ping" to the PocketPrintServer. ping Example: ping 192.168.42.24 On some systems, this may require an additional parameter. Some implementations of "ping" only send out one "ping" packet which could get lost in transit. Check your system documentation for more information. 3. Connect power to the PocketPrintServer. The PocketPrintServer will "glean" its IP address from the "ping" packet. This IP address will remain in effect until the PocketPrintServer is power cycled or reset. Therefore, a permanent IP address should be assigned by running the ExtendView TCP/IP utility or via "telnet".

Jan 30, 2007 | Extended Systems Pocket Print Server

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...