- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a reset button on the back of the router. You have to press it in for about 10 seconds. (While the router is on) This will reset the router to default settings. You will lose all security, and your network will be "Open". You will then have to refer back to the guide in order to setup your network security, and create a new password. Here is a link to the guide. ftp://ftp.zyxel.com/P-660HW-T1/user_guide/P-660HW-T1_3.40.pdf
You can access various internet services with your phone browser. The appearance of the web pages may vary due to screen size. You may not be able to see all the details on the web pages.Depending on your phone, the web browsing function may be displayed as Web or Internet in the Menu.
Use only services that you trust and that offer adequate security and protection against harmful software.For the availability of these services, pricing, and instructions, contact your Network service provider.You may receive the configuration settings required for browsing as a configuration message from your Network service provider.
1.Open the configuration message from your Messaging Inbox. 2.Select Options > Save. 3.The GPRS (General Packet Radio Service) settings will be saved to your phone. 4.Restart your phone. 5.Select the correct access point to connect to the internet.
Hope you are satisfied with my solution.Thanks for choosing Fixya.
sounds like you have done most the right things, you could try another browser see if that helps, if your using Internet explorer try google or firefox etc see if that does the trick
update your anti virus and anti spyware and run them first too
hope this helps a little let me know if i can help further
1. if it's a virus or malware clean up your computer (use AVG or avast for virus clean up and Spybot S&D, adware se, and a-squared for other malware.. all of them are free). make sure you update the programs and run them 1 or 2 times depending how contaminated your system is.
2. repair your internet adapter's connection:. in network connections, select right click your network adapter and select repair.. see if you get an valid ip address different from 0.0.0.0
3. Do you have access to your access point / router on the network you have problems with.
you need to have the SSID for your Access point (router) and a key or passphrase (if setup) if you don't have those check with your network administrator
4. did you mess around with the internet options?.. open your browser go into tools, internet options, security tab and reset your internet settings for the internet zone to default.
5. check you are within range and that your wireless adapter is on.
good luck and post more details to be assisted further if needed.
Check that you have your PSP® (PlayStation® Portable)
system set up for Wireless (WLAN) networking in Infrastructure Mode.
Make sure the WLAN switch on the left side of the PSP® is
turned on so that the PSP® can connect to the internet.
Make sure you are within range of a wireless access point (or
hotspot) that allows connections to the internet.
Select (WWW) under (Network) from the home menu and press .
Use the up and down buttons to select the address bar and
press to display the on-screen keyboard.
Use the on-screen keyboard to enter the address for the web
page you want to display.
When you have finished entering the address, highlight the
Enter button and press .
Select a connection and press .
The web page will be displayed.
To hide the on-screen menu, press .
Setting up Infrastructure Mode;
Infrastructure Mode allows you to connect your PSP® (PlayStation®
Portable) system to the internet through a wireless network (WLAN) access
point. Required items:
A PSP® with system software version 2.0 or later.
A wireless network(WLAN) access point with internet access, such as:
A Wi-Fi hotspot (such as those at cafés, hotels and airports).
A home wireless network, which might include:
A subscription to an Internet Service Provider (ISP)
A DSL or cable modem
A wireless broadband router
Settings used for the SSID, WEP/WPA-PSK encryption and WEP/WPA-PSK key,
as specified when the wireless access point was configured.
To set up Infrastructure Mode on your PSP®:
Make sure the WLAN switch on the left side of the PSP® is turned on
so that the PSP® can connect to the internet.
Highlight (Settings) from the home
Select (Network Settings) and
Select Infrastructure Mode and press .
Select New Connection and press .
Use the on-screen keyboard to enter a name for the connection, then
press the right arrow button to continue.
To set the Service Set Identifier (SSID) for the access point, select
one of the following:
Scan: searches for and then displays a list of access points
(or wireless networks) and displays the SSIDs.
Enter Manually: allows the user to enter the SSID using the
keyboard. Select this option if you know the SSID of the
If you choose the Scan option in the previous step, select the access
point to be used and press .
Confirm the SSID and press the right directional button.
To enter security information for the access point, choose one of the
None: does not set security information.
Wired Equivalent Privacy (WEP), WPA-PSK (TKIP), WPA-PSK (AES):
all set security information. Press the right arrow button to
move to the screen for entering WEP or WPA (Wi-Fi Protected
Note: The WEP and WPA key fields display eight asterisks
no matter how many characters you enter as the key.
After entering the security information, press the right arrow button to
To select the address setting method, choose one of the following:
Easy: the following information is automatically set
IP address settings: Automatic
DNS settings: Automatic
Proxy server: Do Not Use
Internet browser: Do Not Start
Note: Most home networks will allow you to use the
Easy address setting, which is recommended.
Custom: you can manually enter detailed setting information,
such as when you are using a static IP network. For details, see
the instructions supplied with the network device or the
information provided by your ISP.
After selecting the address setting method, press the right arrow
button to continue.
Check the settings, using the left arrow button to return to previous
screens to make any necessary corrections.
To save the new connection, press .
To test the connection, select Test Connection and press
If the connection is successful, information about the network
connection will appear. Press to end the connection test.
You can also check http://www.us.playstation.com/support/psp for more information.