Can i hook my printer up to phone line wireless

Connect the phone connector on the back
of the printer to a phone line (land line) with a phone cable. Dial the # and hit send

Try reseting the wireless router, theres a reset button hold it down for 30 seconds.

,Line should be connected to directly to printer line in port, parelall phone should be connected to extention port,don't split the line for printer & phone. Telephone line voltage should be 48V with/without line connected to the printer, if any voltage differce replace LIU card..

you can buy a print server to connect to your printer to the network. however could you please list the printer type you have? some printers do not work over the network with a print server on mac.
the printer will still function as long as you got a phone line to it for faxes however some features like scanning will not work over the network.

Hi,

I too was having the same problem. We too have a wireless router hooked up. However, that had nothing to do with the problem. Our problem was that the top phone line port on the fax machine should run to the phone jax in the wall. The bottom phone line port on the machine should run to the phone. We had them switched around.

I hope this helps.

If the wireless works okay, then you need to add the printer to your pc. Go to printers in the control panel, select add printer, and follow the prompts. If still no good , let me know if the make/model of the printer and whether it is connected directly to a pc on the network, or plugged into a router/switch with an ethernet cable.

That modem is in itself a router. However it only has one Ethernet port and no means of broadcasting a wireless Internet Signal which makes its function of a Router somewhat useless. What you need a(n) (wireless) access point. The Access Point will give you more Ethernet slots allowing more computers to be connected to the modem/router via CAT5 (Ethernet) cables. Depending on if you get a Wireless access point or not you might also be capable of using a wireless adapter to connect to the 2wire and get Internet access.

Let me know if I need to clarify any of the points above or if I can assist you further.

Not that I know of.....:
Set up a switch close to your desk.. so you can plug in the Fax if you need it.
Sorri.

small phone line goes from your wall switch to the rear of your ADSL modem, then the fatter wire goes from the modem to the input on the rear of your computer.
If it is wireless modem,,and you have a wireless connection on your computer then it should discover the connection by itself, after hooking all the wires up properly

Hi Brenda,

Your All In One wants a phone line hooked directly to it. It won't fax without a "POTS" line directly hooked to it. POTS stands for "Plain Old Telephone Service" which is the line with good old dial tone on it.