Question about Akai PDP-5016H 50 in. HD-Ready Plasma Television

1 Answer

Screen tiling on my akai pdp5016h tv i have horizantal lines flickering. found one local tv repairman who said he would work on it, said it was the powerboard. after 6 months of waiting on him to get one. i installed a new board part#3501q00152a. still has same problem. any help would be appreciated.

Posted by on

  • udriven Dec 24, 2008

    I have the same thing as what it sounds like you described except it is only the top half of the screen. You had mentioned buffer board. Is that a board controling just the top half of the screen.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 52 Answers

Depending on the location of the lines, like if they are in a group close to each other, or all over the screen they could be a couple of things.. If they are grouped in a certain quadrent of the screen, one of your buffer boards is bad, they run along the top and bottom of the screen and are cheap and easy to replace. If the lines are all over the screen, mostlikly the main control board is bad and will have to be replaced.. If that dosent fix the problem then your panal is shot.. Good luck.. Cheap parts on ebay.

Posted on Aug 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flickering screen and lining-out on top inch at first


This sounds like tiling. are you using a cable box?

May 07, 2010 | Vizio GV42L 42 in. LCD Television

2 Answers

Black Lines


My Hitachi TV Flat screen 42 EDT 4 1A has a one inch black line from the top to the bottom of the
screen on the left side. What or how do I fix it. I did blow it out with a air compressor as suggested by a local repairman.

Nov 09, 2008 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

4 Answers

AKAI Plasma TV PDP5016H


See I cant cross that part number and I have all the boards sitting in front of me. That number is the akai part number, but not the actual number of the board. There are 2 boards that they call main in the service manual, the main control board which actually drives the panal, and the "main video board" which handels the video inputs and on screen displays.

PCB failure analysis
1. MAIN CONTROL : a. Abnormal noise on screen. b. No picture.
2. MAIN (video): a. Lacking color, Bad color scale.
b. No voice.
c. No picture but with signals output, OSD
and back light.

If you can determine which of the 2 boards is the problem, I can sell you a new replacement for $125 shipped.

Basicall....Control board is no picture at all.

Main board is no picture, but on screen displays work.

Aug 16, 2008 | Akai PDP-5016H 50 in. HD-Ready Plasma...

1 Answer

PDP5016H AKAI Plasma TV


Try PTS Electronics 800-844-7871.

Scott,

Aug 16, 2008 | Pioneer PDP5016HD 50 in. Plasma Television

1 Answer

Power supply


I found THIS weblink having info for Akai LCD TV parts. Please check it as it might help you.

Aug 06, 2008 | Akai LCT3201AD 32 in. LCD Television

1 Answer

Akai pdp5016h 50 inch


Thats a real tough call on your problem as the set acts like its working normal and then gives out. It could be any number of things, but mostlikely somthing is drawing too much power causing a protection fault hence the power off. These types of problems are very hard to diagnose as the stuff your looking at looks good, its not until it warms up (even being a few seconds or so) that they go bad. You can allways put a meter on the VA and VS to see if there is a flucuation in voltage or even a spike and that could tell you possibly which board is the culpret, but the best is to replace and not repair as switching supplys can be a pain.

Apr 19, 2008 | Akai PDP-5016H 50 in. HD-Ready Plasma...

1 Answer

Lg plasma tv 42pc3dv


you will have to have a tech come check that one out, your gonna need your y-sustain, z-sustain and both y-drive boards replaced.. its a common issue try to get your warranty extended if its out.

Apr 05, 2008 | LG 42PX5D 42 in. Plasma HDTV

1 Answer

No picture and i see fine color lines in horizantal and vertical lines. i also see Tv keeps flickering with very unusal way. This a new tv ahrdly 25 days old Any help apreciated


these sets are notorious for bad inverter boards and bad video processor boards.Sharp is well aware of the problem,and will fix the units if you push the issue.

Feb 28, 2008 | Sharp LC-52D82U Television

Not finding what you are looking for?

Open Questions:

See all Akai PDP-5016H 50 in. HD-Ready Plasma Television Questions

Akai PDP-5016H 50 in. HD-Ready Plasma Television Logo

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69610 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...