Question about Kitchen Ranges

1 Answer

How do you turn the timer off before time is up?

Posted by on

  • 2 more comments 
  • sonnya Mar 11, 2008

    Pressing the timer button again does not do it.

  • sonnya Mar 22, 2008

    It must be in the control, I'll live with it, thanks.

    Sonnya

  • Anonymous Apr 14, 2008

    We are having the same problem.  Have tried STOP TIME, COOK TIME/STOP TIME and CANCEL.  No go.  Unfortunately we no longer have the manual.

  • Michael Grimshaw May 11, 2010

    Electronic controls? Try pressing the timer button again.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 131 Answers

Sorry, I didn't see your reply sooner.

I assumed you've already tried the "Cancel" button, but that would turn off the bake or broil cycle on most machines. If you have the Owner's Manual, your solution should be in there.

On most machines, one of these two options will clear the timer. If they don't, you may have a programming issue with the electronic control. Replacing the control is an expensive solution for this minor inconvenience.

Good luck!

Posted on Mar 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set clock on ge profile gas range


Didn't give a model number, but try the following:

For a mechanical clock, push the center knob in and turn the clock hands to the correct time. (If the Minute Timer pointer should move also, let the knob out, turn the Timer pointer to OFF.)

For a digital clock, push in the center knob of the Minute Timer and turn Knob in either direction to set the Digital Clock numerals to the correct time.

For an electronic clock, touch the Clock pad. Touch the number pad. Touch the start pad until the time of day shows in the display. Note: On double wall ovens, you can only set the Timer for one oven.

(From the GE website)

Nov 06, 2016 | GE Kitchen Ranges

1 Answer

Set the hour on clock on GE electric stove


Didn't give a model number, but try the following:

For a mechanical clock, push the center knob in and turn the clock hands to the correct time. (If the Minute Timer pointer should move also, let the knob out, turn the Timer pointer to OFF.)

For a digital clock, push in the center knob of the Minute Timer and turn Knob in either direction to set the Digital Clock numerals to the correct time.

For an electronic clock, touch the Clock pad. Touch the number pad. Touch the start pad until the time of day shows in the display. Note: On double wall ovens, you can only set the Timer for one oven.

(From the GE website)

Nov 06, 2016 | GE Kitchen Ranges

1 Answer

Setting clock on GE electric stove


Range Setting the Clock and Timer Non-Electronic Clocks: To set the clock, push the center knob in and turn the clock hands to the correct time. (If the Minute Timer pointer should move also, let the knob out, turn the Timer pointer to OFF.)
Digital Clocks: To set the clock, push in the center knob of the Minute Timer and turn Knob in either direction to set the Digital Clock numerals to the correct time.
Electronic Clocks: To set the clock touch the Clock pad. Touch the number pads. Touch the number pads. Touch the start pad until the time of day shows in the display. Note: On double wall ovens, you can only set the Timer for one oven.

Nov 06, 2016 | GE Kitchen Ranges

1 Answer

Set clock and be able to tell am from pm setting


The Clock uses a 12-hour cycle with a.m. and p.m.
1. Check that the oven is off.
2. Press CLOCK.
3. Press TEMP/TIME "+" or "-" arrow pads to set the time of day, including a.m. or p.m.
4. Press CLOCK or START
The Timer can be set in hours or minutes up to 12 hours and 59 minutes.

1. Press TIMER.
2. Press TEMP/TIME "+" or "-" arrow pads to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of countdown.
4. Press TIMER twice to cancel the Timer. Do not press the CANCEL/OFF keypad because the oven will turn off.
5. If the TIMER is running, but not in the display, press TIMER to display the countdown for 5 seconds

Delay Start:
The Start Time keypad is used to enter the starting time for an oven function with a delayed start.

Hope this answers all you questions about your stove.

Jaye

Nov 04, 2013 | Whirlpool RF263LXTQ Range

1 Answer

Setting the clock


To set the time, turn and hold the Timer knob to the clock
symbol = and at the same time turn the Adjusting knob left
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.

Dec 05, 2012 | Rangemaster Toledo 90 (Dual Fuel) Dual...

1 Answer

I have a Tork 1101 timer and up until now has worked fine. Now it won't shut off. The mechanical on/off tabs are set correctly. It turns on and as the timing wheel comes around, the shut off tab...


If clock is rotating on time, next suspect is P47 trippers have worn down. Trippers are made of softer metal so they wear down instead wearing down the on-off lever, and that way the timer lasts longer.
http://waterheatertimer.org/Tork-timers-and-manuals.html#1101
http://www.frontierlighting.com/find.jsp?a=1&ID=,Photo.Cells...Time.Controls,Replacement.Trippers

New replacement Tork 1101 120Volt timer can be purchased on-line at Amazon etc.
Home Depot sells the 120V GE 15306 indoor-outdoor version of Tork 1101 timer.
http://waterheatertimer.org/GE-timers-and-manuals.html#15306
Replacement timer in Intermatic is T101
http://waterheatertimer.org/How-to-wire-T104-Intermatic-timer.html#T101

Jul 24, 2011 | Kitchen Ranges

1 Answer

I have a Dayton time switch hot water heater timer model 2E214 7 day timer in a house that I just bought. Don't really understand how to use it. Where can I find a manual or user guide? Or can someone ...


1) Dayton 2E214 timer is Grainger number for Intermatic 7801B timer.
http://www.grainger.com/Grainger/INTERMATIC-Electromechanical-Indoor-7-Day-2E214

2) Grainger page also show extra on-off trippers for the timer

3) Same/similar timer shows for water heater on following link:
http://waterheatertimer.org/Boxtype.html#T7400

4) I have a similar manual in my files:
http://waterheatertimer.org/pdf/t7802b-2no-2nc.pdf

5) Intermatic site is offline this weekend but link to iNTERMATIC manuals is following:
http://www.intermatic.com/products/timers/mechanical%20time%20switches/7%20day%2040%20amp.aspx

6) If link above does now show exact product, then type Intermatic model number into search bar, and it will show manuals.

7) To operate the timer, attach silver and gold trippers to face of dial. See image below of Intermatic 24-hour dial.
The trippers are labeled on and off.
Buy more trippers at grainger if needed.
geno_3245_296.jpg

ON tripper pushes lever that closes circuit and turns water heater ON.
OFF tripper pushes same lever other direction that closes circuit and turns water heater OFF.
Dial rotates as time passes.
To set current time, rotate dial until current time lines up with pointer. The pointer is stationary.
I believe this model has to be reset after power outage.

8) Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Mar 19, 2011 | Kitchen Ranges

1 Answer

Electric went out and when it came back on everything works except oven and digital timing. Needs reset.


The digital timer needs to be set to the manual mode for the oven to work. If the timer is lit then play with it until it goes back to manual. Turn the oven on and keep an eye on the indicator light. When it lights the timer is on manual. If the timer is out and not working you may need to get a new digital timer. This is a problem which occurs from time to time.

Feb 13, 2011 | Whirlpool Accubake RF362LXTT Electric...

1 Answer

Cooking time button - does the oven shut itself off adfer the prescribed time???


I assume you are talking about an electronic or manual timer. Either timer will turn the oven off after the time expires. These timers must be in automatic mode and not manual mode before they will do this.

Feb 06, 2011 | Whirlpool Accubake RF362LXTT Electric...

2 Answers

I have lost my manual for a Simpson Appolo Atlas Stove


call manufactuerer and ask if you can order one or try to do so online

Dec 22, 2009 | Stoves EC500DOA Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...