Question about Audio Players & Recorders

1 Answer

Logik LM101DU Disc Err message appears when I try to play a CD

Posted by on

  • npigott Aug 24, 2008

    snap same thing happened to me with my logik lm101du - playing series of dvd and cd discs - took a long time to read and then disc error........switched it off as unit was quite hot - maybe it will reset??

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same - turned the power off overnight and the unit seemed to 'reset' itself and work. Davep.

Posted on Apr 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A word Err appears on sony CDP-CX53


The message is its way of telling you it is shot.

Feb 13, 2014 | Sony CDP-CX53 51-Disc CD Changer

1 Answer

Technics SL-MC60 error message: "Take out"


Hello
If a disc has been put in the slot of the disc in play, Remove the disc, whose number is displayed, and press stop button.
Because of light or noise, the changer has detected a disc in the lot of the disc being played, even though it is empty. Check whether there is a disc in the displayed slot. With front panel closed, hold down "STOP " button for atl least four seconds or more.

Feb 03, 2012 | Audio Players & Recorders

1 Answer

When I try to play a disc, the message


Hi there! Depending on when last the CD Player was serviced, I would think that the laser is at fault and needs replacement. However it may also be a mechanical fault. The only way to know for sure is to take the cover off and to see whether the disc turns at least a little bit before moving to the next. Also check whether the disc lifts into position properly and moves freely. If all the above proves OK, then the laser is probably at fault. Remember that there is current running through the unit so please stay away from any wires and boards when checking this. Best Wishes and Good Luck. JUS004

Aug 21, 2009 | Technics SL-MC400 110-Disc CD Changer

2 Answers

It pickes up disk then says err 61 when trying to play then says err 73


Make sure the switch on the Credit Computer marked "Service" is in the OFF position.

Jul 31, 2009 | Wurlitzer Jukebox 1015 One More Time...

1 Answer

No disc appears even though a disc is in it - correct side up


Either the CD player does not support the format of the CD or the reading lens insidemight be covered with dust. Use a CD lens cleaner to rectify this problem.

Nov 28, 2008 | Audio Players & Recorders

1 Answer

Denon CD unit will not play due to err


The problem is in the mechanism,maybe when you put another disc while playing that is cause. There is a misaligment there in the tray you better checked it out,and also the lense by using a cotton buds.thats all for now Hespbb....

Jun 19, 2008 | Denon Audio Players & Recorders

2 Answers

Denon udcm m7 cd player often reads ERR on play and eject


Try cleaning the laser first. Take care, because it is delicate.

Some instructions of how to clean a CD laser:
http://www.wikihow.com/Clean-a-CD-Player

If the cleaning does not fix the fault, it is possible that the laser is weak, or there are some problems in the electronics in the CD player. This is not something you will be able to service yourself, unless you are properly trained, have experience, and have the proper setup to perform CD player servicing.

In most cases these CD players are not cost effective to service. You can contact the orignal manufacture for details or any recomendations.

Jerry G.



Apr 29, 2008 | Bose & Wave& Music System

2 Answers

Getting ERR message on CD Player


My kids always cause this one ! Switch off power, remove cover. Remove four screws holding top black plastic disc cover and then remove all of the black plastic ( x 7 ) disc holders. You may find that the aluminium cross structure has come adrift. Replace into the slots again and replace all the disc holders. If you want, you can check before replacing cover, by then ejecting and 'disc skipping'. It should thne be ok. If it has been forced, the aluminium cross structure thing may have also come out of the slot it should in in on the right hand side. Slide the disc frame in or out until it can be fitted and retest.

Jan 14, 2008 | Teac PD-H570 7-Disc CD Changer

1 Answer

"Err" message


i had err 2 screen. removed case (about 10 screws, took just a few minutes) and found 1 disc was had been knocked out of the tray. removed all discs. replaced case. works fine again

Dec 29, 2007 | Denon DCM-280 5-Disc CD Changer

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98879 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69878 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...