Question about Hauppauge WinTV-USB-2 [ 1020 ] (120904)

2 Answers

WinTv-crash I just purchased the Hauppauge usb-stick, but everytime I start winTV, my computer crashes. I've tried more or less anything now. -Help, anyone?

Posted by on

  • Anonymous Mar 27, 2008

    wintv6: 'scan for tuner channels' --> 'wintv channel manager' appears --> as


    Signature:

    appname: wintv.exe

    appver: 6.0.25303.0

    modname: ntdll.dll



    thanks for help

×

2 Answers

English would be good

Posted on Apr 14, 2008

OK Guys - i fixed it. it s a known problem:
------------------------- Absturz von WinTV in Modul ntdll.dll im Sat-Suchlauf Laden Sie ntfix2.exe herunter, führen Sie diese aus und gehen Sie nach folgender Anleitung vor:
Stellen Sie sicher, dass WinTV beendet ist.
Stellen Sie sicher dass der EPG-Dienst beendet ist, falls Sie diesen installiert haben
(rechts unten in der Startleiste, klicken Sie mit der rechten Maustaste auf das blaue Symbol und auf "Exit").

Führen Sie die Datei ntfix.cmd aus.
Die Dateien werden nach C:\Hauppauge\ntfix entpackt.
Falls gemeldet wird, dass 0 Dateien kopiert wurden, starten Sie Ihr Betriebssystem im Abgesicherten Modus (F8 vor dem Start drücken) und führen Sie die Datei ntfix.cmd erneut aus.
Alternativ können Sie die aktualisierte Transponderliste satellites.exe herunterladen, und diese exe-Datei ausführen, um das Problem zu beheben.
----------------------------------------------------------------------

it works :-)

Posted on Mar 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix wavy lines on Hauppauge Wintv hvr950q?


Are they wavy lines throughout the picture or are they just wavy on the side? Waving picture is usually caused by poor power supply filtering. Wavy lines throughout the picture are caused by interference. Try moving the device away from the computer with an extension USB cable it may be picking up interference from the surrounding electronic devices. It could also be defective.

Oct 19, 2014 | Hauppauge WinTV-HVR-950Q (1191) TV Input

4 Answers

WINTV


Which software are you using please give the version

Apr 10, 2008 | Hauppauge WinTV-PVR 350 (WMM32048) TV...

1 Answer

WinTV-T-500 Pixelated screen.


Could be a Ram or Cpu issue. I had a similar problem with ocsasional pixelated picture & discovered my Ram was faulty ( due to overclocking). I replaced the Ram & that fixed the problem.
After another overclock attempt I started getting the same issue as before & realised this time that It was my Cpu causing the issue. By adding a little more voltage to my Cpu the problem was fixed.
This is just to illustrate that the Problem is likely to be a Ram or a Cpu issue, if all else fails. The tuners are heavilly reliant on Ram & Cpu, so any short falls in either can result in an imperfect picture.
Hope that helps...

Mar 02, 2009 | Hauppauge WinTV Nova-t (909) Video Capture

1 Answer

Hauppauge WinTV HVR-1600 - ATSC HDTV receiver


I have a Hauppauge WinTV HVR-1600. I have a comcast digital box hooked up to my PC. Signal is bad and black and white media. I installed the "current" driver two weeks ago (mid October) Work great! We had to perform a PC recovery. I downloaded the "current" driver. Got weak signal and black and white only.

Oct 04, 2008 | Hauppauge WinTV HVR-1600 - ATSC HDTV...

1 Answer

Wintv 2000


From the Hauppauge website:

Error Messages when attempting to run WinTV32 or WinTV2000:
Error messages such as: "Error. Cannot locate capture filter", "Cannot build filtergraph", "Error connecting Vcap and HCWCap filters", "Error connecting preview pin" can be caused by bad driver installations. Run the latest driver on the Hauppauge WinTV-USB technical support page to fix this. This new driver runs HCWCLEAR first, and then automatically reinstalls the driver.
Aternatively you may receive an 'Initialization error HTV=## '. Please look in the Device manager to see if the Hauppauge WinTV USB is listed correctly in the Device Manager. If it is not listed properly or if it has a Yellow mark on it, the drivers should be reinstalled.
Also, look under Universal Serial Bus controllers in Device Manager and be sure that the "Universal serial bus controller" is listed correctly(not disabled) as well as the USB root hub. If disabled, re-enable, and reboot.

Jan 02, 2008 | Hauppauge WinTV-Go Plus (85428010335) TV...

Not finding what you are looking for?
Hauppauge WinTV-USB-2 [ 1020 ] (120904) Logo

1,196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hauppauge TV Accessories Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Luc Francoeur
Luc Francoeur

Level 2 Expert

102 Answers

Are you a Hauppauge TV Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...