Question about Zebra Z4M Printer

2 Answers

Zebra Z4M printer error


My Zebra Z4M printer's power, pause and error light are all constantly on.
The printer powers up and will not go any further.

Could this be a mother board issue?????

Anyone's help would be greatly appreciated...


Thanks in advance

Posted by on

  • beckboy Apr 07, 2008

    My Zebra Z4M printer's power, pause and error light are all constantly on.
    The printer powers up and will not go any further.

  • rechil_colin Mar 13, 2009

    Hp LaserJet 1020 pause when it connected via samba. The printer is directly connected to Windows XP computer and well configured related driver is loaded in XP Computer and work fine, but when take print from suse linux 10.1 it shows pause. The suse linux computer is well networked to windows computer via samba and all are ok. ping is also done, even ping by host name also done. In Linux computer HP 1020 foomatic driver also loaded and configured. But when take print from the Linux computer printer icon, the printer is shown pause after a very few seconds, even test page is not successful. when configured in linux computer the printer server is accessible is shown. plz help me

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 155 Answers

The mainboard does not need to be replaced, just the sensor head open is dirty and needs cleaned.

Posted on Mar 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

The Main Logic Board needs to be replaced.

Posted on Apr 29, 2008

1 Suggested Answer

otacon
  • 1944 Answers

SOURCE: Zebra Z4M printer error

Hi,

Did you try disconnecting it from the power for a few hours?

Posted on Mar 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power, pause and error lights are on. No message


The logic board is blown and would need to be replaced. Have it repaired asd there is nothing you can do.

May 14, 2010 | Zebra Z4M Printer

1 Answer

Zebra Z4M printer error


Hi,

Did you try disconnecting it from the power for a few hours?

Mar 17, 2008 | Zebra Z4M Printer

1 Answer

Same Problem with Z6M


Your Logic bd needs to be replaced or repaired.

Rory
Midrange Repair and Parts

Sep 02, 2009 | Zebra Z4M Printer

1 Answer

Power, pause & error light


You have a bad logic bd and it needs to be repalced. I have logic bds in stock at a really good price. Please give me a call we carry all parts for the Z4m refurbished with a 30/day warranty. I can take your as an exchange for the good one at a reasonable price. Please let me know I can be reached at 708-597-4222 X240 or email rcardenas@mrp.to.

My name is Rory Cardenas.

Thanks



Rory Cardenas
Account Executive
Midrange Repair & Parts
708-597-4222 x: 240

Jun 15, 2009 | Zebra Z4M Printer

1 Answer

Zebra Z4M only feeds a small portion of the label.


You should try a factory reset. Power off the printer. Hold the "pause" and "feed" buttons down while powering up. Allthe lights will blink and when they stop blinking, release the "pause" and "feed" buttons. This will factory reset the printer.

Apr 24, 2009 | Zebra Z4M Printer

3 Answers

Zebra z4m printer is displaying the pause and error light with no display.


Turn on the printer and never turn off pause and error leds? and printer not response? Then the main logic board must be replaced.

Dec 03, 2008 | Zebra Z4M Printer

1 Answer

ZEBRA Z4M LABEL PRINTER LOCKED UP


The printer is Z4M or Z4M plus? I found this error at z4m plus and the solution is to change the motherboard. Roberto Martinez Mexico bartech9@yahoo.com.mx

Nov 14, 2008 | Zebra Z4M Printer

1 Answer

My Zebra Z4M printer's power, pause and error light are all constantly on.


Possibly the head open sensor is dirty and causes the LEDs light on. Clean the sensors and the plaque that is above them. Roberto Martinez Mexico bartech9@yahoo.com.mx

Jul 14, 2008 | Zebra Z4M Printer

3 Answers

ZEBRA Z4M PRINT QUE ERROR


Try a reset: press the PAUSE and FEED keys while turning the printer, release the keys when feed the label. You can also try downloading the latest firmware.

Jul 02, 2008 | Zebra Z4M Printer

3 Answers

Failure to initialize


better give it for service

Feb 25, 2008 | Zebra Z4M Printer

Not finding what you are looking for?
Zebra Z4M Printer Logo

1,977 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

lancer284

Level 1 Expert

35 Answers

kenneth njonjo

Level 3 Expert

1575 Answers

Are you a Zebra Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...