Question about GPS

1 Answer

UNIT APPEARS TO BE LOCKED UP ! UNIT POWERS UP BUT WHEN YOU GO TO PAGES SCREEN, UNIT WILL NOT RESPOND. AFTER TRYING THIS SEVERAL TIMES , UNIT NOW HAS A SCREEN THAT IS IN A DIAGNOSTIC STATE. SCREEN READS BURN IN AND RATIO STATUS. I ALSO HAVE NO GPS.

Posted by on

  • 2 more comments 
  • WISEMAN44 Mar 10, 2008

    CAN YOU TELL ME WHAT IS WRONG WITH THIS UNIT

  • WISEMAN44 Mar 10, 2008

    I'M SORRY IT IS A LOWRANCE LMS334

  • WISEMAN44 Mar 10, 2008

    I THINK I DISCONNECTED OUR RESPONCE , ANYONE THERE

  • WISEMAN44 Mar 10, 2008

    YES IT IS THAT MODEL NUMBER ON FRONT OF UNIT

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers

Hi,

Could you please tell me which model and brand you have? Thank you.

Posted on Mar 10, 2008

  • Damen Wong
    Damen Wong Mar 10, 2008

    I am here. Is that exactly what is written on your unit?



    LOWRANCE LMS334?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen does not respond to touch at times


I find this happens to me sometimes as well.
The screens are capacitive touch sensitive which means it responds to the small amount of electricity on your skin. If your fingers are damp, from sweat, high humidity, then the capacitance will not reach a level for the screen to react to.
Keep your fingers dry and keep the screen very clean and free of oils.

Mar 11, 2015 | Amazon Kindle Paperwhite

1 Answer

MID model M729B can not get the tablet to respond to unlocking the screen


Here's a link to the manual:
http://www.mymidpad.com/M729B_User%20Manual.pdf

You need to do a hard reset which will wipe all data and restore the tablet to factory settings.

Jan 18, 2015 | Tablets & eReaders

1 Answer

My 3g screen is not responsive after changing the screen/digitizer/frame. Powers up, but locked slider won't respond.


I would verify that all of the proper connections are in place. Here's a video for clarification:http://www.youtube.com/watch?v=4mboB8p-sdw

Dec 11, 2011 | Apple iPhone 3G

1 Answer

When I turn my Garmin Nuvi 680 on, and the first screen appears about not driving while operating the Garmin, I have to hit "agree" button several times before it goes to main menu, and from that...


Hello,

Try performing a soft reset.
Disconnect the unit from any external power supply.
Depress the reset button behind the flip up antenna.
Reconnect the unit to the power supply and let it should work normally.

If the soft reset does not work, try performing a hard reset.
Caution: Performing a hard reset will erase all user information including favorites and bookmarks and restore the unit back to factory settings. Be sure to save any information before performing the hard reset.
With the unit off, press and hold the lower right hand corner of the screen while turning the power on until a pop-up appears. Press "Yes" to restore the unit back to factory settings.

Sep 21, 2011 | Garmin Nuvi 680 GPS Receiver

1 Answer

Appears to be locked up. before it locked up it


These units seem to be suffering from a bad connection on the inside of the unit.
First try cleaning the 4 brass connection tabs on the watch and check your charger to make sure the tabs are raised and not squished. Second try to reset the unit. Hit mode reset and power buttons all at the same time. Hold these for 3 seconds and then release. If these do not work here is what I did. There are no screws holding the unit together. I used a exacto blade to very carefully pry the unit apart along the side seam. It's not easy to do. Be very cautious and gentle. Work the thickness of the blade into the joint to gently wedge apart. You are not trying to remove material! Once apart you will see some fingers that make a connection between the upper and lower part of the unit. This is where the problem was with my wife's 305. I gently raised these tabs to make a better connection, It's been working ever since. I didn't try it before but try pressing very hard on the unit where it says Forerunner 305. The case is very hard so it might not work. But if it powers up when pushing you found your problem. Hope this helps. Here is a link I found on opening a 205 (Same process) http://ctorunner.googlepages.com/dismantleforerunner205 To put the unit back together use Automotive silicon/gasket maker. Use a tooth pick to put a VERY small amount of silicon around the entire seam. Put the two half's together and wrap tightly with electrical tape. Test the unit immediately to see if it powers on and off. If it does not open it back up and raise the small prongs that make the connection from the bottom half to the top half. If any silicon squishes out the sides wipe with water and a rag. Let the unit sit over night. In the morning remove the tape.

Nov 14, 2009 | Garmin Forerunner 305 GPS Receiver

1 Answer

Precision M60 Keyboard Won't Work


I don;t believe there;s a lock. have you tried another keyboard on it?

Mar 06, 2009 | Dell Precision M60 Notebook

1 Answer

I purchased a NAVMAN S-150 GPS In-Car Unit last week from ****-smith online shop. I have been testing this device for several days now. Why is it that the various touch screen buttons respond differently...


I have the same problem, the s150 touch screen is pathetic, Got the same story from Strathfield Car Radio..it was normal and had it in for repairs twice when the screen went crazy with vertical lines, same fault both times. I went back to using my s50 and will sell the s150, it is a highly complex, very pretty lemon. They wont refund you or give map upgrades for inconvenience caused by their faulty product. To sum the s150 up. A truly Miserable experience. Rate it out of ten? its a minus.
Graeme

Nov 21, 2008 | GPS

2 Answers

Cannot access main menu or pages screen


I think I can help with your issue. I have an LMS 334c and have had a few issues in the past. Called the factory (this answer is not listed any where in your manual) and they instructed me to "Soft Re Boot" my unit and it would put everything back to factory settings. Try this anytime it does not respond for whatever reason.

Turn the unit off.

At the same time press the Pages and Power button. Hold both down until you see the square box come up in the screen. You should have your factory settings again. May need to try a few times.
Lowrance said it works just like a computer, ever now and then it just tries to disect to much information at one time and hangs up.
Good luck. James Cantwell

Nov 03, 2008 | Lowrance LMS-330C GPS Receiver

1 Answer

The upper oven door is locked shut and will not release. All lights are off on the display panel and the oven does not respond when any setting are pushed. I have reset the circuit breaker several times...


im to assume that this happened while self cleaning, sonds as if you have had a high limit thermostat go bad adn has shut down oven function( depending on model there is also a fuse inline with the main control panel to protect it from the heat/ power surge, unit will need to be pulled out to acess fuse behind the unit

Jul 09, 2008 | Whirlpool RBD245PDS Electric Double Oven

4 Answers

CDC-X304 in permanent DEMO mode


I HAVE SAME PROBLEM. AFTER I REPLACED MY DEAD BATTERY MY AIWA CDC-X304 IS STUCK IN THE DEMO MODE. ONLY CD WORKS BUT ALL BUTTONS ON FACING DO NOT RESPOND. ANY SUGGESTIONS HOW TO RESET.

Jan 16, 2008 | Aiwa CDC-X304 CD Player

Not finding what you are looking for?
GPS Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Will Halftowaite

Level 3 Expert

503 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...