Question about Gateway GT4022 PC Desktop

2 Answers

My cpu doesnt turn on what should i do??

When i was in dubai my cpu is working..but when i arrived back here in the philippines with my computer set my cpu wont turn on..what should i do??i tried almost everything..i tried to check my power supply if it will work on other cpu's and it did..the hardware..everything..still i cant turn my cpu on..help please thanks..

angel

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Computers often prevent themselves from turning on if there is a loose component somewhere within the case. Try the following:

  1. Make sure any cards (network/video/sound/etc) are securely seated in their slots. You may want to remove and reinsert them into their slots just to be certain.
  2. Completely unplug each hard drive and cd drive. Remove the cable from the drive and from the motherboard where appropriate. Re-insert all of the cables. Pay attention to the orientation of the IDE cables if your drives use those, and they probably do. It matters. Plug them in exactly as they came out.
  3. Try turning your computer on. If this works, rejoice, otherwise:
  4. Remove the ram from the machine and reinsert it back into the slots. Try powering it on again.
This should work, especially since your computer was just moved.

Posted on Mar 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

So, your computer is not running, is that correct? do you get any lights on the desktop front panel? did you check the power supply for the proper rating on the switch?

Posted on Mar 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello people so i have this computer case from dubai and now i am in canada. So the cords power is 250v and the CPU voltage is 110/220v should i put the chord directly into to the CPU and use a Canadian...


You can change the power supply, the whole box and wiring. The pc runs on 12 volts mostly on the board and it is dc. Realize the wall sockets are ac, it has to be rectified anyway. I don't think I would try direct since 250v is considerably higher than the 220v that it could handle, I think it would work but, don't think it would last long before burning out the power supply and cause you to replace it anyway.

Mar 14, 2013 | PC Desktops

2 Answers

None stop noise(sound) the first time i turn the machine on, but it seems working alright coz everything functioning sofar


From your description I would say they hard drive is failing and would suggest that you buy a new one and transfer all your data over to it or go to a pc place and have them do it.

Feb 28, 2011 | PC Desktops

2 Answers

I turned off the Dell Dimension e520 before a storm. I have tried numerous times to turn it back on, only to have a yellow flashing light. How can I get my computer to turn on?


Good day.


Here's my point of view of you problem. I have also experienced the same problem since it is always raining here in the Philippines. I just have to ask a few questions before i can give a direct solution to you.
Please provide the following:
1. Do you have a voltage regulator in your computer set. 2. Do you hear a beeping sound everytime you turn your computer on after the incident happened? 3. Does the processor fan still runs after turning your PC on or not? 4. Kindly provide your computer specs.
Good day and should you have any questions regarding the questions, feel free to approach us.

Jun 15, 2010 | Dell Dimension E520 PC Desktop

1 Answer

My monitor goes to sleep on its own and cpu starts to beep and doesnt turn back on for a few hours


You can disable the monitor sleep option by doing the following:
Step1: Open up Power option from the control Panel
Step2: Disable the 'Turn Off Display' by setting it to 'Never'

Mar 08, 2010 | PC Desktops

1 Answer

My emachine T1742 desktop will not turn on. When plugged in the power supply's fan turns on, cpu fan doesnt start, both hdd/power led's flicker and pressing power button doesnt power on/off system.


Disconnect all the devices from the computer(tower) including keyboard, mouse, monitor(everything)..even the power cable

Now keep on holding down the power button on the computer tower for 15-30 seconds..

Now release the power button, plug in the power cable, monitor, keyboard, mouse and turn on the computer...

If it works, great!!!

Otherwise, take it for repair..

Dec 03, 2009 | E-Machines eMachines Desktop PC

1 Answer

My hp pavilion a1330n computer freezes on the HP


Hi,
the dreaded Blue-Screen of death.
Usually caused by:- Ram Failure ( memory Modules )
CPU Failure ( Processor Failure )
Hard-Disk faulty, not spinning et,c.
Cmos battery fault.
Missing/deleted/corrupted operating System files.

Possible Solutions:- remove cmos battery, from Motherboard for 10 seconds and replace. ( eliminates cmos/bios errors )
remove 1 stick of Memory ( Ram ) and test individually ( eliminates 1 or More Faulty sticks Of memory Or Slots )
remove, CPU Fan/heatsink, remove CPU and re-seat, re-grease with Artic-Silver or similar ( thermal-Compound ) replace heatsink/Fan. test.

Hope this points you towards a Sucessful repair.

Mike @ Compurepair. No-Links No-Nonsense Just Good Practical Advise :-)

Nov 04, 2009 | HP Pavilion Media Center a1330n - AMD...

1 Answer

Cpu doesnt work


Dear Zalrashdi20,
When you say that the CPU doesn't work, what happens exactly? Does it not power on OR There are beep sounds heard OR there is an error on screen that you would like to share? OR ...

Assuming that the machine is not powering on at all .. here are few checks that you would like to perform...
  1. There is a toggle switch (Voltage selector) at the back of the computer on the power supply unit, just besides where you connect the power cable .. make sure that appropriate voltage is selected.
  2. Try connecting the computer to a different wall socket.
  3. If computer is connected through the Surge protector or UPS then try connecting it directly to the wall socket.
  4. Try using a spare power cable if available.
  5. Remove all other connections apart from Power supply, keyboard, mouse and monitor and see if that makes any difference.
  6. Remove the power supply cord from the back of the computer and press and hold the power button for few seconds .. this would drain the accumulated power from the CPU components .. now reconnect the power supply and see if that makes any difference..
  7. Open the chassis and see that couple of wires run from behind the power button on the CPU to the big circuit board (Motherboard) .. make sure that the wires are properly secured.
Perform these basic checks and let me know and I would glad to assist you further.

Regards,
Srinivas

Jun 21, 2009 | E-Machines (T2824) PC Desktop

1 Answer

Good evening..i am joane, very desperate coz i just bbought a defective acer aspire one notebook...i just bought it from dubai through my friend..when it arrived here in the Philippines, it did not...


Acer will help you, Acer is great on warranty issues.
Contact them and they will tell you where to send your laptop, the may even come home to you and collect it, then after repair bring it home to you.

http://global.acer.com/support/index.htm

Go to that site and contact them.

Good luck to you

If you find my answer helpfull, dont forget to vote

Dec 17, 2008 | PC Desktops

2 Answers

My computer just turns off


"Error Smart" is malware and will slowly wreck the OS, you must un-install this programme from your computer and perform a registry clean, then, right click on "my computer" select "computer managment" and "event viewer" check the "system" log to find out what has caused the crash.
What you describe sounds like overheating, so take the side panel off the computer and clean the dust from the CPU fan and from inside the case itself, please make sure you have the power disconnected from the back of the machine before you remove the side panel and make sure you "ground" yourself (keep one hand on the metal case)

Nov 22, 2008 | Acer Aspire (AST180-US340B) PC Desktop

1 Answer

My computer wont go to windows xp when started up and it doesnt even go to any type start up screen


hi gllwymiller;
1.check all your connections
2.check monitor and cpu power
3.when you power on your cpu, do you actually hear the fan turning or see your power led light up?
4. what OS are you using?
5. Feel the rear fan or your CPU, is it blowing out air?

get back to me :)

Jul 01, 2008 | Gateway PC Desktops

Not finding what you are looking for?
Gateway GT4022 PC Desktop Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Gateway PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...