Question about Televison & Video

5 Answers

Have 2 RCA Remote controllers, neither of which (for reasons unknown) fail to operate my Toshiba DVD Recorder/player Model D-RW-2-SU. No problem with TV or Sat Rcvr. Please advise as I have spent HOURS trying all searches.

Posted by on

  • 5 more comments 
  • OLDREBNAVY Mar 10, 2008

    no help at all.....

  • OLDREBNAVY Mar 10, 2008

    new unit, clean as a baby. NO HELP

  • OLDREBNAVY Mar 10, 2008

    of course, all methods fail

  • OLDREBNAVY Mar 10, 2008

    My complaint applies to RCA Universal Remote 4 Devices RCR4258 as related to my Toshiba DVD Recorder/Player. None of the methods of coding said remote (methods fully complied with) fail to obtain a response. This is an enigma and I need help for which I am being charged!

  • OLDREBNAVY Mar 10, 2008

    RCA Universal Remote (4-way) Model on box RCR4258

  • OLDREBNAVY Mar 10, 2008

    There is NO SUCH THING AS A "Search Button" ON EITHER OF MY TWO RCA REMOTES. YOU AREN'T PAYING ATTENTION!!!

  • OLDREBNAVY Mar 10, 2008

    There are/is no such button called "Search Butto" on either of two RCA remotes I have. You aren't paying attention or are NOT QUALIFIED to be called assistants

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 377 Answers

Hi,

Post here the link

remote

Posted on Mar 13, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 407 Answers

Hi
Toshiba DVD Recorder/player Model D-RW-2-SU.

1) turn on the dvd player
2) press and hold the code search button, when the indicator light is lit, release the code search button
3) press and release the component button you wish to use (dvd), the indicator light should blink once and remain lit
4) aim the remote at the dvd player and push the on/off/power button, there is a 3 second pause between codes, so keep the remote aimed at the dvd player
5) as soon as the dvd player turns off via remote, press and release the enter button

now to record the code for future reference..
1) press and hold the code search button, when the indicator light is lit, release the code search button
2) press and release the component button you wish to use (dvd), the indicator light should blink once and remain lit
3) press and release the code search button, the indicator light should turn off
4) starting with 0, press and release each button in numerical order (0-9) until the light blinks, write down the number that caused the light to blink

repeat step 4 two more times until you have the 3 digit code. in the future you can use the direct programming mode to reprogram the remote if need be.

Posted on Mar 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Hey oldrebnavy,
]
could you please supply the model number of the RCA controllers? I understand they function with other units, so they are supposedly the universal sort.
We can match them up for frequency and coding(which is what makes them work across the board) with the Toshiba units specifications.

thanks for sending that along.

Posted on Mar 10, 2008

  • 1 more comment 
  • Patrick Michaels
    Patrick Michaels Mar 10, 2008

    Old reb..

    please click on this link, and about half way down the page, on the right hand side, are the Toshiba codes for your remote. Are you familiar with how to program those codes?

    here's the link

  • Patrick Michaels
    Patrick Michaels Mar 10, 2008

    this is as much information as anyone could possibly want on this subject, no?

    click here for that forum

  • Patrick Michaels
    Patrick Michaels Mar 10, 2008

    actually, oldnavydude,

    those are the precise instructions from the remote manuals. The links I sent you provide a more 'manual' approach than the autodetect that they are suggesting. Unless, of course, you are lumping me in with your comments, are you?

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 796 Answers

Hello

Posted on Mar 10, 2008

  • isaac johny
    isaac johny Mar 10, 2008

    have you configured it with the corresponding remote codes...


  • isaac johny
    isaac johny Mar 10, 2008

    sorry sweet...you posted when i was typing i think...
    i ll leave it to you ...continue

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Hellow sir

Posted on Mar 10, 2008

  • dewan nafees ahmed Mar 10, 2008

    please open the remote and clean it



    that it self well solve the problem



    thank you sir



    good luck



    don't forget to rate the solution

  • dewan nafees ahmed Mar 10, 2008

    ok johny

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

With a rca drc8000 dvd recorder how to finalize recorded dvd without remote


You can stop the recorder by pressing power button to standby mode. Don't unplug the power from the electric source.

Dec 20, 2014 | RCA Televison & Video

1 Answer

I cannot make my toshiba dvd recorder work with


You need the sheet that came with the remote. If the manufacturer's codes do not work with your ??, then you need a more modern remote. The codes must ALREADY be in the remote to be used. The code is part of the REMOTE.
http://www.tvcodes.com/ may have the code for you.

Mar 22, 2010 | RCA 3-Device Universal Remote with...

1 Answer

Prog Code on RCA311ST for Toshiba DVD Recorder


yes there is a video on you tube how to program a universal remote

Jan 17, 2009 | RCA RCR311S Remote Control

1 Answer

Recording from vhs to dvd


As long as you've got the DVD recorder set to the correct "channel" I can't see why it won't work. Why don't you just try it out on a DVD-RW first ? Use RCA cables from the VCR "OUT",  to the DVD recorders "IN" sockets and you'll be okay. If for some unknown reason it doesn't copy you haven't used a good disc. Probably won't copy anything with Macrovision(or other copy protection) though.

Sep 05, 2008 | Sony RDR-VX515 DVD Recorder/VCR

1 Answer

Dvd player/recorder


Like many RCA products that use a DVD Burner, these burners are not high end ones and go out without warning and the first indication is the dreaded HELLO issue. I have tried contacting RCA and the makers of the DVD-RW drives but still I am in the dark as to any possible firmware/software updates for these devices. No fix to this date, only replacing the DVD-RW will resolve this.

May 13, 2008 | RCA DRC8052N DVD Recorder

2 Answers

Remote control codes


how program a remote control for a toshiba tv

Dec 22, 2007 | Televison & Video

1 Answer

PROGRAMING MY TOSHIBA REMOTE TO CONTROL MY RCA DVD


I forgot the pin code on the remote, how can I over ride it?

Oct 23, 2007 | Toshiba CT-90157 Remote Control

3 Answers

Error Message


The manual says to press the display button (just below the eject button) on the remote. This worked for me.

Oct 01, 2006 | Toshiba DR4 DVD Recorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73073 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...