My wireless network crashed,how do i get it back.i have a dlink DIR.615. thanks.

To setup a network just follow the step by step guide that came with the DIR-615 router. When it comes to setting up the internet on the router wizard just select Cable or DHCP and leave the other internet settings as default.

As regards to your printer we need to know the make and model number so we could further assist you. By knowing the make and model of the printer it will help us how to best setup your printer on the network. The model number is usually the name of the printer or near barcodes on the back or bottom of the printer.

lets try removing the security configuration if any from the wireless network then try connect the iphone again.

Hi,
well here is a link to obtain the manual http://www.dlink.com/products/?pid=DIR-615
you need to select Support Resources Tab and choose the revision type you have. then you select product manual. One example is this one "DIR-615 no rev. http://www.dlink.com/products/?tab=3&pid=DIR-615&rev=DIR-615

GL
hope this helps

Don't forget to rate my answers
Thank You
Jammer

I would go to the company website www.dlink.com

When you configure the "wireless" adapter inside the D-Link router, you should set:
* an SSID (a name for your wireless network)
* an encryption-level - hint: use 'WPA'
* a password for your wireless network

Once you've done the configuration, use the SSID/password on your iPod Touch.

It appears your brother has changed your wireless router settings.
You can reset the Dlink back to the default settings by -
Power off the Dlink and press and hold the RESET button on the back of the Dlink and the power on the Dlink. Hold the RESET button for 5 secs. until the LEDs flash at the same time.
Connect a LAN cable from the computer to the Dlink. Open a browser and enter the Dlink's configuration URL
http://192.168.0.1
Default login = admin
PW = blank (just press Enter)
You can now change the admin password and set up a new passphrase (ie encryption)
For details on how to secure your wireless from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

See http://static.tigerdirect.com/pdf/D-Link-DIR-615-Manual.pdf

To reset the DLink back to the factory defaults - power up the DLink and press and hold the RESET button until the LEDs flash.
You can then reconfigure the wireless router with new settings.

Turn the router off.
Straighten one end of a Norwegian paper-clip,
and insert it into the small hole in the back of the router,
to "reset" the router to the "factory" settings.

Turn the router on, connect to its built-in web-interface,
and the "default" ID/password should now work.

Change the password.

Rerun the "Wireless Network Setup Wizard",
to recreate your wireless network.

hi. with regards to your concern. there is a possibility that the wireless network adapter driver is corrupted.. try uninstalling the driver for your wireless adapter and reinstall again. once setup is done, view the available wireless connection and connect.. it will ask u the password if there is..then it will connect. if this solution dont work.. try to check your wireless settings, maybe there is a problem on the settings..