Question about Office Equipment & Supplies

1 Answer

Toshiba estudio 550 ca2 code

Laser h sync problem i had a light streak in middle of copy about 2 inches wide took laser unit apart checked out now i have ca2 codes i have cleaned all lint and dust off of mirrors in laser unit any suggestions. rick

Posted by on

  • rickie g Mar 11, 2008

    COGZ THE ANSWER TO QUESTION IS NO I DID NOT HAVE THIS CODE BEFORE. I TALKED TO A TECH TODAY AND HE SAID THAT IT MAY BE THE SYNC SENSOR I TRYED TAKING UNIT OUT AND CLEANING LINT ON MIRRORS BUT DID NOT CLEAN THE BARREL OPTICS I WOULD TELL EVERY ONE NOT TO OPEN THE LAZER UNITTHEY ARE VERY EASY TO MESS UP.THANKS FOR THE HELP. RG

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 1,326 Answers

Did you have the same code before?? Try to remove the laser again and reinstall it again it may just be a loose connector. Retrace your steps..

Posted on Mar 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brother MFC 8500 print issue


Hi-

Try cleaning the glass part with a glass cleaner solution with a damp cloth, but if you need instruction how to clean the inside part of it, suggesting you consult a technician or certified servicer for the product to avoid further issue. thanks for using Fixya!

Jul 16, 2008 | Brother MFC-8500 All-In-One Laser Printer

1 Answer

Canon NP6221 makes copies black and white with black streak down middle. How can it be fixed--works well otherwise.


They are manny cause of black copy.
1.over tone.
2.arching on main charger or dirt on main charger.
In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On : Brother Printer Support

Feb 16, 2014 | Canon NP6221 Fuser Thermofuse

1 Answer

I have Minolta 2300W Laser Printer and it folds the first page only about 3 to 4 inches down makes a nice one inch fold but take that out and print again...next page fine.....now printing with two wide...


The is blocked by dust on the side of the paper on the image unit that would have color associated with the print. Remove all the image units and clean all the laser glass. Replace those image units also if streaking as for the paper ensure correct paper side and media type.

Jul 12, 2010 | Minolta magicolor 2300W Laser Printer

1 Answer

3 flashing lights + "call for service" displayed and won't copy


This model was notorious for that code.
It is a Laser Unit failure. Some tech bulletins were issued reguarding installation of grounding straps or replacement of entire Laser Unit.

May 05, 2009 | Toshiba e-Studio16S Copier

1 Answer

Toshiba e-studio 55 has 2'' wide black line on all copies


make sure the glass thats an inch wide under the doc feeder next to the large glass is clean if it is then you will probrably need drum or fusing rebuild

Mar 20, 2009 | Toshiba Office Equipment & Supplies

1 Answer

Dark streaks on copies from Xerox XC356 copier. Streaks were light at first; changed to a new toner cartridge and streaks are same size/same place on the page -- but now darker. There are three streaks,...


Replace the Drum Unit, Do you know how to rebuilt this unit, if not you can get an after market product, The Drum unit release is in the Middle of the Copiers you will see a door , open the door, then ONLY , and i do mean ONLY, touch the "Green" release lever for the drum take it out and replace it or rebuilt it f you now how, if this does solve it, which i am certain it will but, if it doesn't something is wrong with the fusing unit and needs to be dismantled, wish i could give you our contact info however, been informed not too so sorry. rules of fixya.com

Mar 04, 2009 | Xerox XC356 Copier

1 Answer

Streaky Laser Printer Toner Cartridges


replace roller or call to have this device serviced by pro

Mar 24, 2008 | Office Equipment & Supplies

1 Answer

Horizontal streaks on pages


Streaks at 2.82 inch intervals: Horizontal marks at this interval are the result of a mark on the fusing roller of the printer. In some cases, these marks can be cleared up by running a cleaning page through the unit. Laser Printer Cleaning sheets can be purchased at your local printer/office supply store. If the marks persist, this can indicate a more serious problem with the fusing roller that would require service attention.

Streaks at 3.74 inch intervals: Horizontal marks at this interval are the result of a mark on the image drum of the printer. There is no way to repair a damaged photosensitive image drum, so in the case that it is scratched or otherwise damaged, the entire CRU (toner/drum cartridge) would require replacement to clear up these marks.

Dec 03, 2007 | GCC Technologies Elite 12/1200N Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...