Question about Emerson EWL20D6 Television

2 Answers

NEW EMERSON 20" LCD STERO TV/DVD- NOT WORKING

HI. OUR EMERSON TV/DVD COMBO WILL NOT TURN ON WITH THE REMOTE OR BY THE POWER BUTTON ON THE TV. WE HAVE TRIED TO UNPLUG IT AND REPLUG IT IN, BUT ITS STILL NOT WORKING.

Posted by on

  • 7 more comments 
  • Anonymous Mar 31, 2008

    exact same thing happend to us just minutes ago too.

    Weird--ours also has an ozone type smell coming out of it and there was a bright flash in the back in the housing.

    I don't think any of it is good news.

    Eileen

  • angie75 May 07, 2008

    I am also having the same problem with our TV. We have a Emmerson LCD/DVD and it worked fine the other night and the when I tried o turn it on last night, I got nothing. No power at all! I tried to unplug it and still nothing. I even called the worthless tech support, just to find out that they can not do anything because it just turned a year old in April. Go Figure.

  • Anonymous Oct 21, 2008


    • 20" emerson ,dvd combo, no power to set. will not turn on. rem@ hutchtel.net

  • Anonymous Dec 01, 2008

    The tv will not power up.

  • Anonymous Jan 22, 2009

    i get no power with button or remote.

  • Anonymous Feb 05, 2009

    I have same problem, watching tv, all good and then just shut off never to turn on again. Removed back but fuse is good. Any suggestions. tech support sucks. Only used tv 3 or 4 times. Any one out there got one that turns on but has dvd prob? maybe we can build one good one from 2

  • Chris M
    Chris M May 11, 2010

    PRESS THE CAPS LOCK KEY TO TURN OFF CAPS LOCK

  • Anonymous Mar 13, 2014

    I bougth this tv not only this but 4 in black friday only one works the others the lcd were broke this is frustrate it can you help me with this

  • Anonymous Mar 15, 2014

    My TV is stuck in retail mode and I want it off so that I can stop unplugging my cable box every time I want to watch it

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi can anyone tell me ? if I can use my Emerson 20" LCD TV as a computer moniter ?

Posted on Dec 20, 2008

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

The flash was the fuse inside the set blowing it usually takes out one or two diodes in the power supply section but maybeyou got lucky and its only the fuse.

Posted on Oct 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get out of video mode if remote will go to tv mode?


there should be several buttons along one side of the tv that work all functions . if remote is not working try new batteries

Feb 11, 2015 | Emerson LD190EM1 19 in. LCD TV/DVD Combo

3 Answers

DVD video showing without DVD in


have you tried pressing the dvd button twice on the remote?

Apr 13, 2008 | Akai CFTD2011 20 in. EDTV-Ready LCD...

1 Answer

Need universal philip sru3003wm/17 codes for emerson tv/dvd combo


Hi,
You can use the following code for your Emerson Tv/DVD combo to control with sur3003wm/17 remote
4 digit code is 0247.
ok

Mar 22, 2011 | Philips Televison & Video

1 Answer

Could not program dish network remote to combo emerson tv


We would be happy to help. We currently do not have anycodes specifically for your Emerson TV/DVD combo unit, but we would recommend performing apower scan. If there is a code that is compatible with your TV, the power scanwill find it. Power scan instructions:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the TV. If the code for the TV comes up, the TV will turnoff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SAT mode.Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jul 05, 2010 | Emerson EWL20D6 Television

1 Answer

Lost remote control


Try Website 1-800-Remotes Factory Original.To buy a exact or compabiale to the original.

Feb 14, 2010 | Emerson EWL20D6 Television

2 Answers

Need remote code for emerson LC195emx LCD TV to program my uverse remote. ATT codes don't work. Thanks


hi! i have here a couple of codes for your emerson tv. you could try them 0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037 hope it would work! goodluck!

Jan 21, 2010 | Emerson LD195EM8 19 in. LCD TV

1 Answer

Need remote code for Plye 15" TV combo


Please follow the steps below to program your remote control to equipment other then your DISH receiver:
Note: If you start this procedure and at any time and do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again. Use the TV button for your TV, the VCR button for your VCR or DVD player. These Mode buttons are located at the top of your remote control.
1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release. 
2. Press the numbers 5-0-0 on the remote control. 
3. Press the Pound (#) button on the remote. 
4. Press and hold the correct Mode button until all mode button backlights illuminate, then release. 
5. Press and release the Power button on the remote control. 
6. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off. 
7. Press the Pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. 
8. To verify the code works try several different functions for that equipment. 
We cannot guarantee our remotes will work all other devices. If this does not correct the issue, unfortunately our remote will not work for that device. We apologize for any inconvenience this may cause.
Let me know if this helps.
Please rate this solution. Lone99star

Mar 03, 2009 | Pyle 15 in. LCD TV/DVD Combo

1 Answer

Remote code to turn akai TV/DVD combo on/off


Hi hojha, Here is the instructions from Dish Network. Please follow the steps below to program your remote control to equipment other then your DISH receiver:
Note: If you start this procedure and at any time and do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again. Use the TV button for your TV, the VCR button for your VCR or DVD player. These Mode buttons are located at the top of your remote control.
1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release. 
2. Press the numbers 5-0-0 on the remote control. 
3. Press the Pound (#) button on the remote. 
4. Press and hold the correct Mode button until all mode button backlights illuminate, then release. 
5. Press and release the Power button on the remote control. 
6. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off. 
7. Press the Pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. 
8. To verify the code works try several different functions for that equipment. 
Let me know if this helps and please rate this solution. lone99star

Jan 13, 2009 | Akai LCT3201TD 32 in. LCD Television

1 Answer

The Remote doesn't work fully any more


Order another remote from remotes.com, that's what I did.

Aug 05, 2008 | Mintek DTV-323 32 in. LCD TV/DVD Combo

Not finding what you are looking for?
Emerson EWL20D6 Television Logo

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...