Question about Akai CFTD2083 20 in. TV/VCR/DVD Combo

1 Answer

AKAI Black TV screen, but still have audio

Our Akai tv screen has gone black. There is still audio, but there isn't any picture. The same goes when we try to use the built in DVD or VHS players. Any ideas on where to begin to try and fix it? Thanks much!

Posted by on

  • 1 more comment 
  • Anonymous Apr 04, 2008

    A black box appears suddenly on the screen, however I still get audio?? what is this? How can it be fixed?

  • Anonymous Apr 14, 2008

    I HAVE AN AKAI 55 INCH HDTV. MY PROBLEM IS THAT THE PICTURE QUALITY IS POOR. IT IS NOT BRIGHT AT ALL. I HAVE TRIED THE AUTOFOCUS AND ALL THE ADJUSTMENTS FROM THE REMOTE, BUT THE PROBLEM STILL REMAINS. WHAT SHOULD I DO

  • china1275 Feb 24, 2009

    tv screen is black but still have sound

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 152 Answers

I think your Video Drum needs to be replaced since it's bad. You can get replacement Video Drums on the Internet.

Posted on Jun 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have 42" plasma akai


Any luck getting this fixed?Please let me know.Thank You very much!
Tyler

Jan 31, 2011 | Akai LCT2715 27 in. LCD Television

1 Answer

Authorized Repair Centers for Akai Flat Panel TV


first try to reattch all coneection to your televison.
then open the back side cover of your tv then reattch all connectiuon there .
Also clean dust from all circuit.

Apr 23, 2009 | Televison & Video

1 Answer

Tv doesn't turn on


power pack probably has blown capacitors on it. need replacement of those and the tv should be fine.


Apr 03, 2009 | Akai LCT2715 27 in. LCD Television

1 Answer

TV Screen goes black


all tv has built in tuner inside,search for variables for inner tuner.when the signal is not fix naturally it goes black and white or destorted/blurred.

Oct 17, 2008 | Akai Televison & Video

1 Answer

TV turns itself off after turning on. TV screen goes black.


Based on what I have read AKAI has reoccurring problems with power supply and bad DVD sound. The problem you have is caused by the DVD player trying to start. Never leave a disk in when you shut it off or you will have the same symptom you are describing.

Oct 07, 2008 | Akai LCT2721AD 27 in. LCD Television

2 Answers

Akai LCT2721AD - Power on - Sound on - Black screen (No Picture)


Ive reviewed and assisted anoter person who had a similar problem that caused the tv to malfunctioin simialr to yours. After doing some short research and the other person who had the problem, came to find out that 4 resistors failed on the main board causing this to happen. It also could be the backlight of your Plasma screen tv, or your Plasma screen itself is shot.

I would recomened that if you have no active warenty to give a visual inspection of the Tv, via removing the rear black plastic pannel to see if any of the corisponding chips have any burn marks or excessive heat stress. these items seem to be failing about the 12 month mark

Good luck

May 12, 2008 | Akai LCT2721AD 27 in. LCD Television

2 Answers

No picture


I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

Jul 16, 2007 | Akai LCT2060 Television

1 Answer

Black Vertical Bar


It will burn into the screen overtime. The Akai units have a resistor on the address board that feeds the PDP that usually has a crack in the solder on one or both ends of it. There are about 4 address boards that are right below the panel itself and the suspect one is the board right below the line that is appearing. Have someone with solder skills repair it.

Jun 02, 2007 | Akai PDP4294 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Akai CFTD2083 20 in. TV/VCR/DVD Combo Logo

Related Topics:

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...