Question about Motorola HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery Eliminator

2 Answers

How to Program a Motorola HT1000: Hex?

Hey there,
I'm trying to program my HT1000 radios. Nobody mentioned this whole RSS thing when I first bought them, now I'm trying to figure out how to program them myself.

I understand Motorola apparently has the RSS software, but I can't find it anywhere, and probably couldn't buy it if I could. I saw a posting once that someone had changed the configuration in their radio using a Hexidecimal Editor. What do you think - is this possible?

Thanks,
-- Mark

Posted by on

  • Anonymous May 08, 2008


    1. no cable how to reprogram ht1000

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 123 Answers

To program this radios you need the RSS, RIB box, and the programming cable.
The Hex Editor is used to modify the RSS for some specific functions beyond the programming.
The RSS you need is the RVN4098 try to search in the web.

Posted on Mar 10, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

For cable information visit http://www.batlabs.com as for the software you have to buy a subscription from Motorola or find a dealer that will program the radios for you. These are your only two choices. Motorola keeps a very tight track of thier software and firmware. Each software package that a Motorola dealer recieves is traceable back to the dealer should they ever make copies and distribute it out, and you won't find a dealer that is willing to give out that software because it could mean the end of thier Motorola dealership

Posted on Aug 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a Motorola HT1250 Radio off Ebay from japan and cant program it


You will likely need the same version or newer of the software used to originally program the radio. You might check with your local Motorola dealer to see if they have the most recent Radio Service Software (RSS) and give it a try. Or a nationwide repair facility for after-warranty radio repair might have some idea how to get it to program properly.

The software is proprietary to Motorola and only available by subscription to Motorola Solutions dealers and certain other user types.

Best regards.

Feb 26, 2013 | Motorola Ht1250 Vhf 136-174mhz 128 Channel...

1 Answer

How do you program an older MTS 2000 Flashpoint?


You'll need radio service software (RSS) and you'll need a radio interface box (RIB) and you'll need 2 programming cables and you'll need a computer. It might have to be a really old computer, such as an IBM AT/XT with -- the kind with a monochrome display and 5.25" floppy drives running MS-DOS -- or possibly a newer PC might work. Alternatively, you'll need about $20 and someone to do the job for you. Just look for an online auction that offers programming services. Most importantly, make sure your FCC license permits you to use the frequencies that you program into your radio.

Apr 26, 2011 | Motorola HT1000, MTS2000, MTX8000/9000...

2 Answers

How do i program my motorola mts 2000 flashport scanner


Your Motorola MTS2000 is not a scanner but a high-end two-way radio. It requires a computer, special interface box (called a RIB, for Radio Interface Box), the proper cable from the radio to the RIB, and the programming software called RSS (Radio Service Software.)

This is much more difficult than a scanner to program and if not done properly can cause the radio to automatically transmit on frequencies that you are not authorized to use.

Try calling your local Motorola dealer and ask them if they will program it for you for receiving only. They will either flatly refuse or they will be happy to charge you a service fee. Some places are more willing than others.

Dec 15, 2009 | Motorola HT1000, MTS2000, MTX8000/9000...

1 Answer

I have a motorola Ht 1000 i need to no how to program it with the keypad only...


The HT1000 is not keypad programmable. The HT1000 is dealer programmable using a radio interface box (RIB), cable, the appropriate Motorola propietary software. A sister radio named the JT1000 can be made keypad programmable with an accessory called a programming key.

Best regards.

Nov 29, 2009 | Motorola HT1000, MTS2000, MTX8000/9000...

3 Answers

How to program a motorola gp328 vhf 2 way radio?


i have program kit and software i need program for emergency siren what i have to do

Jan 04, 2009 | Motorola Radio Communications

1 Answer

Motorola mts 2000


MTS2000 software will operate on Win98 and possibly XP, depending on the revision number you have. Yes, you can clone if the model number is the same. It will clone the entire codeplug of the radio. (Note: you will not have 2 same serial numbers. These are unique to the individual radio.)

Aug 16, 2008 | Motorola HT1000, MTS2000, MTX8000/9000...

1 Answer

How can I program my MTS 2000


Most Motorola shops, including ours, will program the radios using Motorola proprietory RSS for a small fee. (Ours start at $25 with $5 for each additional unit cloned via the RSS.)

Cloning via the RSS is only possible if the units are all the same exact model number.

Aug 08, 2008 | Motorola HT1000, MTS2000, MTX8000/9000...

1 Answer

I dont know how to program


1. Program the ABC switch as zone select.
2. Program each 'personality' into the proper zone (eg A1, A2..., B1, B2..., C1, C2..., etc)
3. Load the codeplug into the radio.

May 27, 2008 | Motorola HT1000, MTS2000, MTX8000/9000...

1 Answer

How to prograqm a motorola mts 2000 flashport?


1. Program the ABC switch as zone select.
2. Program each 'personality' into the proper zone (eg A1, A2..., B1, B2..., C1, C2..., etc)
3. Load the codeplug into the radio.

May 27, 2008 | Motorola HT1000, MTS2000, MTX8000/9000...

Not finding what you are looking for?
Motorola HT1000, MTS2000, MTX8000/9000 Compatible 2 Way Radio Battery Eliminator Logo

Related Topics:

3,236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Steve

Level 3 Expert

3289 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...