Question about Barebone Systems

1 Answer

I have a canoScan 3000/3000F scanner that I want to install on my new computer. When I put in the disk it doesn't instal

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Remove and reinstall your printer driver software. follow closly in the setup section.

Posted on Mar 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting boot error message


The error PXE-E61: Media test failure usually means the hard disk has failed or the hard disk needs re-seating or the disk controller is faulty. First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty. Next - to check if the hard drive is faulty, remove the hard drive and insert it into an USB hard drive adapter and connect it to a working computer's USB port. If this computer cannot see it as an USB mass storage device and you cannot open the various folders and files on this drive, then this confirms the hard drive is faulty. Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

Oct 09, 2012 | mpc X3000 Laptop Transport 14.1" Barebone

1 Answer

Shuttle computer will not finish boot up process


This is usually because the operating system is corrupt. Try to start the computer with the OS disk in the drive. This may work, if it doesn't I would suggest getting a new copy of the OS.

Jun 24, 2012 | Shuttle Computer Shuttle Xpc X27d-bk-v1...

1 Answer

I have an acer aspire 5040 laptop and when I switch it on it doesn't go to windows it comes up a black screen saying operating system not found. I have tried pressing alt and f10 but nothing happend. I...


The laptop cannot find the operating system on the hard disk.
First - re-seat the harddisk and reboot the computer. If the computer does not boot up then reboot andgo into the BIOS configuration to see if the BIOS detects the hard drive. If itdoesn't detect the hard drive then it could be faulty.Next - to check if the harddrive is faulty, remove the hard drive and insert it into an USB hard drive adapter and connect it to a workingcomputer's USB port. If this computer cannot see itas an USB mass storage device and you cannot open the various folders and fileson this drive, then this confirms the hard drive is faulty.Then the hard drive needsto be replaced in the computer/laptop, Windows installed and the computer orlaptop's device drivers plus your programs etc. to get a functioningcomputer/laptop again.

May 07, 2012 | Barebone Systems

1 Answer

Error reading from a disk, why does this keep happening when am trying to boot up my computer?


First - re-seat the harddisk and reboot the computer. If the computer does not boot up then reboot andgo into the BIOS configuration to see if the BIOS detects the hard drive. If itdoesn't detect the hard drive then it could be faulty.Then the hard drive needsto be replaced in the computer/laptop, Windows installed and the computer orlaptop's device drivers plus your programs etc. to get a functioningcomputer/laptop again.

Feb 18, 2012 | Lenovo Barebone Systems

1 Answer

My hp laptop 6735s displays hard disk error


Replacing a disk is pretty simple. Look at the bottom of the case, there will be an area that has screws you can remove to access the disk. Carefully remove it, disconnect any cables and take it to a computer store and get another one. Reinstall
You now have a computer with nothing installed. If the old disk is readable, you might be able to get the information "cloned" onto the new disk before you install it. This will require some skill and a couple of tools. It is best left to a local computer person.

Hope this information will help.

Your response is very much appreciated. Thank you for using Fixya...

Oct 01, 2011 | HP Barebone Systems

1 Answer

I HAVE NO DISK FOR SETUP FOR PRINTER SCANNER FOR X85


this i presume is a lexmark x85
i presume you have windows xp or vista on your computer

if you have not tried windows setup wizard to install the scanner please do so .if its not listed or found then either go to driversguide.com where you can signup for free and download a few drivers for free or go directly to lexmark

alternatively you could email a seller of an x85 at an online shop/auction site like this link http://peterborough.kijiji.ca/c-buy-and-sell-computer-accessories-Lexmark-X85-All-in-One-Printer-Scanner-Photocopier-W0QQAdIdZ42295454 and maybe the guy might be able to email you the files needed

hope this helps.haemox

Mar 27, 2008 | Barebone Systems

1 Answer

Printer driver not working


Hi there, i dont know if this is of any relevence however, i have just spent the whole afternoon trying to install my new printer, every time i installed my disk a little icon popped up saying usb didnt recognise the device, despite endless frustration i did it another way, If your printer is a usb connection then before inserting the disk connect the printer to the computer and switch on, this then brings up the wizzard which should help you install, if this doesnt work...trust me it took me ages, try different usb ports, i finally found one that picked up the printer, after it detected the device i was then able to continue with instalation via the disk and wohoo many hours later i have a printer, unfortunatley i have now run out of paper doh!!! i hope this helps someone :-)

Mar 03, 2008 | Barebone Systems

1 Answer

Scanner


Do you have any scanner software installed to use your scanner with? In most cases a scanner comes with CD that installs a software package that will allow immediate use of the scanner after installation. Once that package is installed, you place picture in one of the corners of the scanner underneath the lid of course and press either the manual scan button that is on some scanners or the button on the software package that you installed into the computer when first configuring the scanner during installation. I assume you have acquired the scanner as a twain source else little will happen.

Feb 23, 2008 | Barebone Systems

1 Answer

Cannot install printer software ,tells me a newer version of software is already installed .this is a HP pavilion computer using windows xp home addition and a hp psc 1350 all in one. I uninstalled the...


Hi,
try uninstalling any software relating to the printer.
shutdown the computer. Remove any printer to computer cables. Re-boot ( startup ) the computer.
let it set itself up. then shutdown.
turn off the power to computer, put your printer cable back in, as if you were installing it for the first time.
the computer should have found new hardware ( your printer ) And ask for a driver. ensure your HP disk is in the drive, and ask to search Drive D:- Or E:- wherever your CD is located.
If it,s already got the latest drivers installed, i would,nt worry unless your printers not functioning correctly.
Mike @ Compurepair.

Feb 19, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...