Question about Dryers

3 Answers

Hotpoint condenser tumble dryer aquarius cdt00- wont dry

Hotpoint aquarius cdt00 condenser tumble dryer

light stays on to say water needs emptying--but dosent
and ** hot air just cold

Posted by on

  • Fang Lou Feb 11, 2009

    but where is the weight switch located do I have to replace it with a new one

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

I am not familiar with this particular unit, but I have a condensing dryer (Malber) which pumps out the water by itself. I am guessing that your unit requires you to empty a bin manually. Even if the bin is empty, I think the unit thinks it needs to be emptied and that is why the dryer will not work to give you hot air. If you do have such a bin, it might have a weight switch which the unit uses to detect if the bin needs emptying. See if the weight switch is working. The same weight switch idea is used on dehumidifiers.

Posted on Mar 10, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I also need help my new condenser keeps bleeping every 3-5 minutes saying h20 water needs empting but its not even primed yet as nothing is collecting

Posted on Oct 20, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can you tell me where on the dryer i can reach the weight switch please?

Posted on Oct 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a tumble dryer Condensed Hotpoint Aquarius tcm570. The empty water indicator is on. I have cleared the,filters and no water was in tank. I have noticed it is taking longer to try clothes and the...


Dryer need to be clean out .
all area of lint screen down to were are comes out or fan may be blowing stripped blade on motor.
Need whole model # of dryer to quote you parts cost

Mar 01, 2015 | Hotpoint Dryers

1 Answer

Hotpoint Aquarius CDT00 reverse action tumble dryer. Spins but no heat. Empted water and cleaned filter.


I have exactly the same problem, I am searching desperately for a solution. I really dont wont to buy a new one!

Jan 05, 2011 | Hotpoint Dryers

3 Answers

I have a hotpoint aquarius condenser tumble dryer


This sounds like the thermostats or heater

ForAll Your Appliance Video Help Visit Apart4u video tutorials

see other tumbledryervideos here


Common faults -
1 The heating elements can fail(meaning open circuit)
2 There are cut-outs (T.O.C's) thatmight need resetting
3 The thermostats (stats) can tripout or burn out (meaning opencircuit)
4 Moderntumble dryers also have sensors and pcb's (Printed circuitboards) thesehaveprograms that can fail and circuitry although most should produce an errorcodeshowing you were the fault is.
5 Faultyconnections and burned wires may also bethe fault.



You-Tube video "sfGInKA3yp8" placeholder (do not delete)




Nov 06, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

3 Answers

Hotpoint aquarius tumble dryer, drum not going round but still


If you can hear the motor going, then the belt probably needs replacing, if no motor action, then prob is more serious.

Please rate my solution.
Thanks.

Jul 15, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Not drying


the steam gets condensed back to water and pumped away so sometimes draining problems cause poor drying. is the machine plumbed in according to handbook?
also your dryer filter may be blocked but this is not accesable without the dryer box being stripped down.

Nov 05, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Tumble dryer not drying


Either dryer element has failed, thermostat for drying or the drying condenser fan not working.

There are two heating elements and the top one is for drying.

Apr 07, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint condenser dryer CDT00


how to connect the dryer belt to the motor is there is two pullys.

Mar 30, 2008 | Dryers

2 Answers

Hotpoint Aquarius 1200 WD62 (Tumble drying issue).


no the steam from the dryer part comes out of outlet tube the same tube were the water comes out hotpoint washer/dryers use a condensing chamber which allows the steam to cool down a pass through it as water does and through the outlet pipe

Aug 14, 2007 | Hotpoint WD62 Front Load Washer / Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

1,109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Brad Brown

Level 3 Expert

15107 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...