I have an onkyo tx-505e receiver and want to connect a ds-ax2 dock. the manual tells me to use the CAB-Sat connection if I want to have on-screen control of the i-pod. If i do that, where do I connect the audio from my cable box and how will the audio from cable shows be received?
I have a grundig etraveller VII and it has gone south. I can get the juice flowing with the sleep button, but cannot set the clock, or tune in anything - I can get plenty of static. Sometimes the stations will change rapidly but will not stop on command and keep rolling by.I cannot set the time or alarms. I cannot switch bands, I cannot use the automatic scan, channel up, or store. I have tried replacing the batteries and that does not work. Is my trusty grundic etraveller seen its last days? I am electronically challenged. JJ
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The power adapter is most probably a standard type. On the radio, Check the voltage rating, the polarity. There are many adapters with multiple output voltage, multiple tips and reversible polarity.
If you want John Lewis (never heard that name before today) here is the website.
From your description the Sony Radio Dock is faulty, if it was bought brand new I would encouarage you to return the device for replacement, if it was aquired through other means try and return it stating it never worked. The items you tried should be plug and play.
These steps will only work while your unit is OFF. The power button is located at the top left face of the unit. How to set time? 1. With the unit OFF, press and hold down the Clock/Display/Play/Pause button for at least 5 seconds. 2. While still holding the Clock/Display/Play/Pause button, press the Hour, and then the Minute button to adjust the hour and the minute on the time. 3. After selecting the correct hour and minute time, release the Clock/Display/Play/Pause button to set the clock.
How to set the alarm? 1. With the unit OFF, press and hold down the AL1 or AL2 button for at least 5 seconds. (an alarm icon will flash on the lcd display) 2. While still holding down the AL1 or AL2 button, press the Hour and the Minute button o adjust the hour and minute on the alarm time. 3. After selecting the correct time for alarm, release the AL1 or AL2 button to set the Alarm time. 4. Press the AL1 or AL2 button consecutively to switch alarm one and alarm two between sounding to a buzzer, the currently set radio or a docked iPod.
hi the radio internall will have a driver and final transistor these are for the output signal or tx. you might find that the final transistor is faulty and needs replacing these fail due to incorrect swr or tuning of the antenna or cable / connector shorts. dont over look a bad microphone connection wiring on either end and internally on the ptt switch
most common driver is 2sc2166 and 2sc1969 for 27mhz amm & ssb