Question about Barebone Systems

1 Answer

NEW PRINTER i AM UNABLE TO PRINT ANYTHING, THE PAGE COMES OUT BLANK

Posted by on

  • DANANDJOJOK Mar 10, 2008

    I HAVE DONE ALL THESE THINGS BUT STILL GET BLANK COPY WHEN PRINTING

  • DANANDJOJOK Mar 10, 2008

    I HAVE DONE ALL THESE THINGS AND STILL GET BLANK COPY, THANK YOU

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 458 Answers

Make sure you took the covers off of the bottom of the ink.

Posted on Mar 10, 2008

  • T&N Family Electronics Dean and Sherrie Terrell

    How can this be inappropriate? That is a common problem with people putting ink in printers. You need to give people more information if you want a better answer. You make my ratings look bad and I done the best that I could with what you stated. I am sorry that I can not know everything. I did try to help you and I did not say anything wrong to you. I have been doing computer work for over 6 years. I have never been able to do everything correct but I do my best to help people.

    The only thing that I had to go by is what you stated.
    You stated, ''i AM UNABLE TO PRINT ANYTHING, THE PAGE COMES OUT BLANK"

    What kind of printer is this?
    Canons are great but known for the print heads to go bad and dry up if you do not use them at least once a week.


  • T&N Family Electronics Dean and Sherrie Terrell

    I was abused by another person on this site. I posted something in the experts lounge and within a few minutes I had 5 ratings go bad. Something needs to be done about this.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No text


Check that your black ink cartridge has ink inside, eventually try a new cartridge , as ink may have dried up in old cartridge.
If you use a new cartridge ensure you removed cellotape from cartrige.
If cartridge is ok, then it is printer nozzle/head for black ink.
In this case do nozzle check / head cleaning in printer tools a couple of times.
If problem persist you may need to check and clean printer's head with cotton and solvent.

regards

Mar 20, 2008 | Barebone Systems

1 Answer

I have Adope Acrobat 8.1.2and can't print pdf. It comes up with unable to start print job. Is the printer available? I have tried everything from downloading it again to moving it to my documents etc. Can...


Interesting. Well, I have two suggestions.

If you're using Acrobat Reader, try downloading Fox-it Reader, a free, lightweight alternative to Adobe's product. It's a fully functional, drop-in replacement. It's not exactly a fix, but a possible workaround.

The other option is to try reinstalling your printer drivers, which may have become corrupted somehow. You can download them from HP's support page here:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&cc=us&dlc=en&product=441125&lang=en&

Hope that helps.

Mar 17, 2008 | Barebone Systems

2 Answers

After replacing my color cartridge my printer won't print in color. but it will copy color pages perfectly.


When you go to print from IE check the prefrences and see if it is set to Monochrome. It should be under the Advanced tab.

Mar 12, 2008 | Barebone Systems

1 Answer

Printer problem


check your ink level your most likely out of ink. make suer your printer is selected as the default printer in orinter settings from control pannel.run a printer head clean up

Mar 09, 2008 | Barebone Systems

2 Answers

Our Canon Selphy DS810 is not printing any color on the photo paper. I cleaned it several weeks ago, we have a new ink cartridge in and nothing. It was printing a light yellow color several weeks ago...


There are all kinds of printers and printing problems. It’s important to note at the outset that for safety reasons you should unplug your printer if you plan on working inside the device for any reason. In addition to the electrical hazard, printers (especially laser printers) can also be very hot on the inside, so use caution.

There are a few general troubleshooting steps you should take first, regardless of your printing problem. These will help solve most everyday printing issues.

Reboot. You’ll be amazed at how many printing problems simply disappear after you restart your computer. Also, reboot your printer. Sometimes, for no good reason, a printer will become wedged (it just stops communicating with the computer). Turning your printer off for a few seconds, and then back on, will usually get you going again.

Read the printer’s lights. Doing this can provide you with very useful clues. Is the power light on? Is the paper feed light blinking? Don’t be afraid to press buttons on the printer: Turn it off and on, reset the paper feed, and take the printer offline and bring it online again.

Check your physical connections. Is the power cord loose? Does the cable from the printer to the PC have a secure connection at both ends? Look at the connector pins on your cable. Are they bent? Try another cable if you have one. Check the print cartridges and printing mechanism. Is anything blocking the printer? Are the cartridges firmly in place?

Print a Windows test page. Access your printer’s Properties dialog box (follow the directions given above). Select the General tab and click the Print Test Page button. If nothing else, you can find out a good deal about your printer’s problem. If the test page prints, you have a problem with your application, not with Windows. Answer the questions as prompted and work through Windows’ Print Troubleshooter as needed.

Drivers. Verify drivers on the Details tab in the Printer Properties dialog box. Make sure the installed driver corresponds with your actual printer. Check the manufacturer’s Web site for updated drivers and browse the support pages on the site while you’re there.

Mar 06, 2008 | Barebone Systems

2 Answers

My Mitsubishi CP 9550 DW printer i just bought is saying MECHANICAL ERROR


Here is the manual. See page 5.
13 ) Mechanical Error.
After removing Error, press the FEED & CUT
button.
14) Mechanical Error.
After removing Error, open and close the door.

regards

Mar 04, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...