Question about PC Desktops

1 Answer

I have the RF keyboard connected to a belkin PS2 KVM 2 port switch....

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 458 Answers

??????????????????????????????

Posted on Mar 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect all wires at hp xw4600 motherboard intel 775


1) first of all u needed to connect your power cable to the CPU at the top of back side socket

2) now insert the VGA cable into the VGA(BLUE Colour) port

3) now keyboard .>. if your keyboard is PS2 then you have to insert the point in purple colour socket which is upper side to the VGA port
(note: the box side should be face to left hand side)

4) now attach your mouse if it is USB mouse then just insert any of the USB port simply plug and it will start working
if it is PS2 mouse then insert it right besides to the keyboard PS2 port same as u insert the keyboard wire.

May 20, 2014 | HP Workstation Xw4100 PC Desktop

1 Answer

Keyboard failure on dell dimension 2400


Your keyboard needs to be pluged into one of either a USB port, if it has a USB connection or a PS2 Port if it has a PS2 connection.

USB is the rectangular shaped port, while the PS2 is a round, usually purple coloured connector.

Try pluging it in and out, with USB connection type try another USB port at the rear of the chassis or on the front too.

It is possible that the keyboard is faulty, in other words it has come to the end of it's life. Meaning that you may need another keyboard.
Try this keyboard on another computer, a friends computer will do. You could even try a friends keyboard in this computer as another test.

Take care!
damnor01

Jul 04, 2011 | Dell Dimension 2400 PC Desktop

2 Answers

Keyboard error of pc p4 compaq


Check that it is indeed plugged into the purple PS2 port on your computer, if the keyboard is USB then try alternating ports. Some-times just by plugging it into another USB port it can work.
Also it maybe that the keyboard has died, try a friends keyboard on your computer to test it. Try do as much as possible before purchasing replacement parts.

Take care!
damnor01

May 25, 2011 | Compaq Presario 5000 PC Desktop

2 Answers

I am wanting to connect a Gateway keyboard to a Dell PC but I need an adapter from female to male usb port. What adapter do I need? Will I need to download any software for this?


amm udont need an adapter, the keyboard once usb will plug right in,, if its circular,means its a ps2 port and you need ps2 to usb. No no drivers needed. Or usb to ps2 ,, depends on your needs, But all Usb are standarad stuff.

May 06, 2011 | Dell PC Desktops

3 Answers

USB Keyboard and mouse wont work with PS2 KVM with adapter


Have you tried rebooting once it is connected? Not sure if it makes a difference, but I know you can not hook up PS2 peripherals without rebooting.

Nov 03, 2009 | Dell OptiPlex GX280 PC Desktop

2 Answers

Dead


    1. Check your Keyboard-Video-Mouse (KVM) switch. If the system is connected to a monitor, mouse, and keyboard through a Keyboard-Video-Mouse (KVM) switch, or console selector switch, then disconnect the switch and connect monitor, mouse, and keyboard directly to the system. If this solves the issue, please contact your switch manufacturer for support and compatibility on the switch. Some switches can have a firmware update applied to resolve common problems.

      Note: BladeCenter Telco chassis - The KVM module contains keyboard port, mouse port, Power LED, Location LED, Critical Telco Alarm LED, Major Telco Alarm LED, Minor Telco Alarm LED and a video port. The PS2 keyboard and mouse connectors are standard 6-pin Mini Din. The Telco alarms mirror the Telco alarms located on the front panel of the media tray because they use the same signal lines. The KVM module allows the connection of a VGA monitor for system maintenance and control. The video connector is a standard 15-pin VGA. The KVM module is hot-swappable. It is docked into an edge card connector located on the backplane:

      migr_40293_4.jpg

    2. If you have your system daisy chained for KVM capabilities using the C2T port (e.g. xSeries 330),
      then you must flash the C2T firmware after flashing the system BIOS, in order for the mouse and keyboard to work. Otherwise, after a BIOS flash, you will lose keyboard/mouse capabilities unless you walk up to each machine and push the select button.

    • If you are using NetBAY Advanced Connectivity Technology (ACT) CAT5 cabling in your rack server, instead of KVM cabling, click here for ACT information.

    1. Check for POST/startup errors. If you are getting a POST/startup error on the keyboard and/or mouse:

    2. Verify that all items are firmly connected to the correct ports, and that the cables are undamaged with no bent pins. The PS/2 style mouse and keyboard ports look identical, but are not interchangeable. The mouse and keyboard must be attached to the correct ports in order to be recognized by the system and to function correctly.
    3. Swap each item for known good units. If a new item works where the original did not, then the original component must be faulty.

    4. If the keyboard works during the POST/BIOS screens, but not in the operating system, check software logs for device driver errors. Contact your software vendor for more support in configuring the I/O devices.

    5. Check the F1 Setup error logs for system component failures or errors. These are found under Event/Error Logs. Troubleshoot suspect components further to determine if the hardware is faulty. If an IBM component is determined to be faulty, please contact your local IBM Support Center for warranty replacement of the part(s). Please have the Field Replacement Unit (FRU) / Customer Replacement Unit (CRU) part number and Machine Type, model and serial number ready.

    1. Run hardware diagnostics. Replace any parts found defective.

    1. fw.gif
    Download the latest diagnostics for your system
    1. If you can down the system, check the keyboard cable connector on the system unit for proper voltage.

    2. Power off the system.
    3. Disconect the keyboard cable form the system unit.
    4. Power on the system and check the keyboard cable connector on the system unit for the voltages shown:

      PIN Voltage (Vdc) 1 +5.0 2 Not used 3 Ground 4 +5.0 5 +5.0 6 Not used
    5. If the voltages are not correct, replace the system board. Otherwise, replace the keyboard.

    6. If these steps have not solved your problem:
    7. musekye318@yahoo.com

    Jun 30, 2008 | IBM NetVista PC Desktop

    1 Answer

    USB to Ps2 keyboard adapter


    i think your usb to ps2 connector is faulty.
    change it and try again

    Apr 01, 2008 | PC Desktops

    2 Answers

    Keyboard intermittent


    There might be a problem with the keyboards PS2 port. You can bypass the PS2 port all together by buying a PS2 Y-adapter to usb port. This Y adapter will allow you to plug your PS2 mouse & keyboard into it and than you plug the other end into a free usb port. You do not have to plug the PS2 mouse in if you do not want to. Just plug in the keyboard. If your keyboard functions than there is a prolem with the keyboard's PS2 port. The PS2 Y-adapter to USB runs about $12.00 to $15.00. You can find one at Wallmart.

    Jan 07, 2008 | E-Machines eMachines Desktop PC

    Not finding what you are looking for?
    PC Desktops Logo

    Related Topics:

    25 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top PC Desktops Experts

    joecoolvette
    joecoolvette

    Level 3 Expert

    5660 Answers

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18298 Answers

    Are you a PC Desktop Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...