Question about Nakamichi Audio Players & Recorders

Open Question

Nakamichi cd400 tuner modification to european frequency

How to change a Nakamichi cd400 from north American radio frequency to European frequency.

Thanks

George

Posted by on

2 Suggested Answers

  • 4102 Answers

SOURCE: DEH-P7900 BT US model. Isthere

The DEH-P7900BT is almost identical to the DEH-P85BT sold in Europe.

This is a US model and will tune most AM/FM stations in the UK/Europe. The FM broadcast band is 87.8 to 108.0 MHz. so it will not pick up any FM stations outside this range. Also, the tuning is in odd increments (such as 96.1, 96.3, 96.5, etc.) so some stations with even frequencies will be slightly distorted, depending on the power of the signal the station generates.


I found this bit of info for you but ill keep looking and let you know what i find out.
Also have you tried it in europe to see if it does work or not let me know ok

Posted on Mar 30, 2008

ser71
  • 818 Answers

SOURCE: DEH-P7900 BT US model. Isthere

What is the radio FM Frequency range in my tuner?
All of the Pioneer head unit tuner for FM Frequency use range from 87.9MHz to 107.9MHz
Sergio

Posted on Mar 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i shut off standby mode other than unplugging the unit?


No...fully disconnecting power requires unplugging it.

Dec 28, 2014 | Onkyo TX-SR875 Receiver

6 Answers

DEH-P7900 BT US model. Isthere any way I could change the tuner frequency to european one. Thanks.


The DEH-P7900BT is almost identical to the DEH-P85BT sold in Europe.

This is a US model and will tune most AM/FM stations in the UK/Europe. The FM broadcast band is 87.8 to 108.0 MHz. so it will not pick up any FM stations outside this range. Also, the tuning is in odd increments (such as 96.1, 96.3, 96.5, etc.) so some stations with even frequencies will be slightly distorted, depending on the power of the signal the station generates.


I found this bit of info for you but ill keep looking and let you know what i find out.
Also have you tried it in europe to see if it does work or not let me know ok

Mar 30, 2008 | Audio Players & Recorders

1 Answer

Nakamichi CD400 stopped playing CD-R's


you may check the lens it may be damaged so it may read some cd's and the others not , also the problem may be from the burned ones the software that burns it may have some configurations that make the cd readable in some places and in other places not

Aug 23, 2012 | Nakamichi CD400 Sound Quality CD Player...

1 Answer

I'm trying to connect my cablevision coax to my Pioneer VSX-1019 reveiver so I can listen to FM radio through the tuner. The antenna connection on the receiver is a female European PAL (also called as...


Is this what you need? http://cgi.ebay.com/4pc-Gold-Plated-Aerial-Female-Aerial-Female-Adapter-/180435080974?pt=LH_DefaultDomain_0&hash=item2a02c4d70e
although I would be surprised if the signal you have would be correct to supply your fm tuner, you may be better off with something like this (depends on how good your fm signal is locally) http://cgi.ebay.com/FM-AERIAL-KIT-RADIO-RECEIVERS-BALUN-UNIVERSAL-/310283558296?pt=LH_DefaultDomain_3&hash=item483e575d98#ht_2068wt_876
Alternatively, and I know this sounds crude, poke a long piece of wire into the centre of the aerial socket on your tuner and pin it to the wall or a door frame, it often works if you have a decent signal to begin with.

Jan 11, 2011 | Pioneer VSX-1019AHK A/V receiver

1 Answer

How do I preset the tuner for radio stations. I've never had a problem doing this with any other stereo. But what I think should work isn't!


Not very specific. Do you have the manual?

The following is from a VSX-03TXH manual. It ain't pretty but it may help.

I'm posting it in multiple parts due to space contraints.

37

Chapter 6:

Using the tuner

Listening to the radio

The following steps show you how to tune in to FM and

AM radio broadcasts using the automatic (search) and

manual (step) tuning functions. If you already know the

frequency of the station you want, see Tuning directly to a

station below. Once you are tuned to a station you can

memorize the frequency for recall later-see Saving

station presets below for more on how to do this.

1 Press the FM/AM button to select the tuner.

2 Use the FM/AM button to change the band (FM or

AM), if necessary.

Each press switches the band between FM and AM.

3 Tune to a station.

There are three ways to do this:

Automatic tuning

To search for stations in the currently selected band,

press and hold TUNE ?©/?? for about a second. The

receiver will start searching for the next station,

stopping when it has found one. Repeat to search for

other stations.

Manual tuning

To change the frequency one step at a time, press

TUNE ?©/??.

High speed tuning

Press and hold TUNE ?©/?? for high speed tuning.

Release the button at the frequency you want.

Improving FM stereo sound

If the TUNED or STEREO indicators don't light when

tuning to an FM station because the signal is weak, press

the MPX button to switch the receiver into mono

reception mode. This should improve the sound quality

and allow you to enjoy the broadcast.

Using Neural THX

This feature uses Neural Surround™, THX® technology to

achieve optimal surround sound from FM radio.

• While listening to FM radio, press AUTO/DIRECT for
Neural THX listening.

Dec 23, 2010 | Pioneer VSX-07TX Receiver

1 Answer

Hi, my Nakamichi Av 10 receiver tuner and the video AUX section is dead and does not work except for the Tape in


I am facing the same issue All Analog inputs except for Tape in does not work and the tuner does not work on my Nak AV-10

Jun 03, 2010 | Nakamichi AV-10 Receiver

1 Answer

Onkyo T-4500 FM reception problem


I have the same tuner...yes the fm and am frequencies are different there than north america...check to see if you have the "worldwide" model...there is a small switch under a small hole underneath the tuner to select the region for where it is to be used. If its not the worldwide model then i think your outta luck.

Apr 21, 2010 | Onkyo T-4555 Tuner

1 Answer

Owners manual for nakamichi AV-10


how many watts is an AV10, as I need to purchase a step up stabilizer/converter to use the receiver in North America

Jan 24, 2010 | Nakamichi AV-10 Receiver

1 Answer

SR573... Does it support NTSC/PAL?.


There's no mention of either NTSC or PAL in any spec sheet.

This link leads to Onkyo and the rear view of the amp lacks the voltage selector.

http://www.onkyousa.com/model.cfm?m=TX-SR573&class=Receiver&p=s

The manual for the similar model SR575 says the North American model does not have the voltage selector. Too bad. Under the general specs for the variants of this family of receivers they list the following power specs. I have no idea where you have to go to buy one from the "Others" group.

Power Supply North American: AC 120 V, 60 Hz
European: AC 230 V, 50 Hz
Others: AC 120/220-240 V, 50/60 Hz
AC 220 V, 50/60 Hz

Some aliases for the SR575=
TX-SR505
TX-SR505E
TX-SR8550
TX-SR575

You could do what I did over 30 years ago. Join the Army, go overseas and buy one in the PX. Every HiFi product we bought in the PX in the 70's had the dual voltage feature.

Apr 07, 2009 | Onkyo TX-SR573 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nakamichi Audio Players & Recorders Experts

ELECTRICLAW

Level 1 Expert

4 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Are you a Nakamichi Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...