Question about GE RM24912 Universal Remote Control

1 Answer

GE 3 device junior remote instructions

I have this remote and I am trying to figure out how to program it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have posted an Inctruction Manual for this remote (RM24912). That should help with your problem.

Posted on Mar 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ge universial remote i need the code fora dynex flatscreen tv dvd combo


1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.
3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the device Button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit.
4. Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will turn off.
5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed, If your TV, VCR, DVD, etc. does not respond after you have tried all the codes for your brand or if your brand is not listed, try searching for your codes by following the steps below. Codes for brands are located at the bottom of this link. http://www.directutor.com/content/ge-universal-remote-instructions
GE Universal Remote Codes and Instructions direcTutor

Nov 15, 2016 | GE Remote Controls

1 Answer

I have an HD access modeled ETA 1030 converter box and I have a Time Warner Cable universal remotes I was trying to see if there was a code for that?


      Universal Remote Control Code Finder. Philipsuniversal remote controls can operate audio and video devices of almost any brand. For each of your audio/video devices, you have to enter a Device Code in the universal remote control.

      Universal Remote Control Code Finder

      www.urc.philips.com/
    Feedback

    GE Universal Remote Codes ' Jasco

    https://jascoproducts.com/support/ge-universal-remote-codes
    Note: If your remote was purchased before January 2006 Click Here for the 3-digitremote code list. Program your GE Universal Remote using the correct code list and instructions.

    Universal Remote Control Codes

    www.remotecodelist.com/

Feb 05, 2016 | Universal Remote Controls

2 Answers

Need to reprogram GE remote to Samsung tv


GE Universal Remote Codes ' Jasco

https://jascoproducts.com/support/ge-universal-remote-codes
A version 2 through version 4 remote will have a "V2" to "V4" after the model number. ... Program your GE Universal Remote using the correct code list and ...

GE Universal Remote Codes and Instructions ' direcTutor

www.directutor.com/content/ge-universal-remote-instructions
Direct Code Entry for GE remotes with 4 digit codes. 1. ... Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press ...

How to Program a Universal Remote - Frontier

internet.frontier.com/resources/how-to/program-a-universal-remote/
Here's how to program universal remotes from RCA and GE: ... with whatever device you're currently attempting to program (i.e. the TV, the DVD player, etc.) ... If you havea V2, V3 or V4 remote and are programming a DVD player, press PLAY ...

How To Program A GE Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-ge-universal-remote/

Feb 03, 2016 | GE Remote Controls

2 Answers

Lost programing instructions and codes


1. turn on device
2. press setup (underneath on/off) till red light stays on the take finger off the button
3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once
4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press
5. press and release enter to install code

3-Digits Universal Remote Codes
4-Digits Universal Remote Codes
GE #24912 Universal Remote Instructions
GE Universal Remote Instructions

Apr 15, 2011 | GE JASRM24912 Remote Control

1 Answer

I've been trying to program my GE universal remote, but when I follow the instructions to find the right code I am able to turn the TV off through the remote, but not on. Am I missing a...


Take out the battery 20 mins to erase the codes.Tries to follow the steps again closely.If the codes is the correct codes,should able turn off and on also.I programs many universal remotes before,work both way off and on never one sided off only not on.

Sep 17, 2010 | GE Remote Controls

1 Answer

I need the programing code for a sylvania tv


Give these a try.
SYLVANIA ..........0062 0004 0009 0135
......................0189 0183 1141 0227 0456
......................0008 0068 0075 0141 0161

Or these:
Sylvania
004, 006, 008, 019, 062, 068, 069, 074, 075, 076, 077, 088, 116, 161, 183, 184

And incase you need the programming instructions, here ya go!
MANUALLY ENTERING CODES
1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to
program.
2. Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.
3. Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.
4. Enter the three or four digit code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.
5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed,
repeat steps with the next code. If none of the codes listed for your
device work for your device or your brand is not listed, try the Code
Search method described below.

Aug 22, 2010 | GE JASRM24912 Remote Control

1 Answer

I need instructions for my ge universal remote


If its a plain tv you would use the codes:

MAGNAVOX ... 1174 0062 0004 0009
........................... 0183 1133 0226 0288
................. 0456 0008 0068 0075 0141


Instructions
1. Press and hold the SETUP
button until the red
indicator stays on, then
release the SETUP button.
2. Press and release the
desired Mode button (TV,
VCR, etc.). The red
indicator blinks, then
stays lit.
3. Enter the 4 digit code from
the code tables. Note:
after a valid code entry,
the red indicator turns off.
For an invalid code, the
red indicator flashes.
4.With your device on,
press CHANNEL UP. If
the device responds, no
further programming is
required. Note: If some
buttons do not operate
your device, try one of the
other codes for your
brand.

Jul 15, 2009 | GE RM24911 Remote Control

1 Answer

I am trying to find the manual instructions for the RC24912B 5512 JC012 general electric universal remote control


HOW TO PROGRAM GE JASRM24912 Remote Control DOING CODE SEARCH


1. turn on device

2. press setup (underneath on/off) till red light stays on the take finger off the button

3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once

4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press

5. press and release enter to install code

Jan 03, 2009 | GE JASRM24912 Remote Control

4 Answers

Lost code and instruction book?


Orion Codes: 035, 121, 135, 191, 394 Programming a GE Universal Remote Control takes about seven steps. Step One: Manually turn on the device you wish to program. Step Two: Press the Code Search button on the remote until the indicator light turns on. Step Three: Release the Code Search button. Step Four: Press and release the button for the device you are programming. Step Five: Enter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off. Step Six: Aim the remote at the device and press the power button. The device should turn off. Step Seven: Press Channel Up on the remote with the device on. If the device responds, no further programming is required. To look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator Website. http://www.jascoproducts.com/support/download-files/RemoteCode-3-Digit-New.pdf http://www.jascoproducts.com/support/download-files/RemoteCode-3-Digit-Old.pdf Hope this helps, Good Luck :) Please Vote

Jul 10, 2007 | GE RM24911 Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Peggy Cook
Peggy Cook

Level 1 Expert

7 Answers

Are you a GE Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...