I dont know how to make my armitron watch silent, every hour it beeps to tell me when its 1 oclock 2 3 and so on, but being in school that gets very anoying

Jessica, 1. From Time Telling Mode, press and hold 'D'. Press 'B' simultaneously to select either 12 Hour or 24 Hour (Military) Time. NOTE: 'A' indicates 12 Hour Time is selected. 2. Release 'D' to return to Time Telling Mode.
Try the links for manual on this watch.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://fitness.manualsonline.com/manuals/mfg/armitron/wr_165.html

http://www.angelar.com/~jeremy/ArmitronLadiesDigital.pdf

According to the directions: Press B - bottom left button,to go into Alarm Mode. Press D - upper right button - to activate the alarm and press again to activate the Chime, which shows on bottom left as a bell. To activate these press D. To DEACTIVATE them press D again. Press B 3 times to return to Time Telling Mode. It took a few tries, but D and B are the keys to stopping that annoying chime!

I have the same watch. I've figured out how change in and out of 24 hour time.
1. press and hold "ST/STP" until the month/day screen is visible.
2. while holding "ST/STP", press "MODE". A 'p' visible below the month/day indicates 12 hour mode. The absence of a 'p' indicates 24 hour mode.
Manual for 4-button version is here, but all the directions are applicable. https://www.armitron.com/images/upload/XNAPE01.pdf

These are the instructions posted on the Armitron website. I hope they help.

1. From Time Telling Mode, press 'B' twice to enter the

Alarm Mode.

2. Press 'A'. Alarm Hours flash. Press 'C' to advance the

Alarm Hour.

3. Press 'B'. Alarm Minutes flash. Press 'C' to advance the

Alarm Minute.

4. Press 'B'. Alarm Time Zone flashes. Press 'C' to select

either Time Zone 1 or Time Zone 2.

NOTE: The Alarm is available in one Time Zone only.

5. Press 'A' to end set sequence.

6. Press 'B' to return to Time Telling Mode.

ACTIVATING THE ALARM AND HOURLY CHIME

1. While in Alarm Mode, press 'C' to activate the Alarm.

The Alarm symbol appears to indicate the Alarm will

sound at the preset Alarm Time for 20 seconds or until

'A', 'B' or 'C' is pressed.

2. Press 'C' again to activate the Hourly Chime.

"CHIME" appears to indicate the Hourly Chime will sound

every hour on the hour.

3. Press 'C' again to deactivate the Alarm.

4. Press 'C' again to deactivate the Hourly Chime.
5. Press 'B' to return to Time Telling Mode.

Hi jaihmal11,

You can download all ARMITRON watch manuals/instructions from this link.
http://www.armitron.com/watch_instructions.asp

Hope it helps.

Thank you for using Fixya.

You need to press button A to enter the time setting mode and then press C.

If you have lost your instructions, you can get instructions from the Amitron web site.

Copy "www.armitron.com/watch_instructions.asp" into your search engine and you will see a list of illustrations of watches and associated
instructions.

Choose the one that looks like yours and download the PDF file.

You should have a symbol of a bell, which indicates he alarm is "on" and the letters "CH" which means "hourly chime".
Press button at 2 O'clock position to enter the alarm mode. Press the button again and the "bell" should disappear; press the button again and the "CH" should disappear.

Now press the button at the 7 O'clock position to return to the normal timekeeping mode.

HI, I HAVE A ARMITRON WR300 MEN BLACK WATCH WITH NO INSTRUCTIONS, I NEED TO SET IT, CAN YOU PLEASE GIVE ME SOME INSTRUCTIONS.I HAVE A ST/STP BUTTON AT 2 OCLOCK EL AT 4 OCLOCK MODE BUTTON AT 8 OCLOCK AND A ADJ AT 9 OCLOCK, PLEASE HELP ME !!

Based on insructions for another watch, I just figured this one out. The steps would be:
Get in Alarm mode (press mode button)
Then you can cycle through the following by pressing the ST/STP button
1. Alarm on
2. Chiime on
3. Alarm and Chime on
4. Alarm and Chime off
You can see this with a magnifying glass and watch the center and right hand circular icons at the top of the display.get highlighted.

From the instructions that came with the watch:

Press the button at the top left to get into time change mode, press on the bottom left button to move between seconds, hours, minutes, etc.

Press the top right button to change numbers; hold to move quickly.