Question about Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Light blinks four times, screen doesn't turn on

I have a Trinitron WEGA model # KV-27FS120, chassis style B06. At least, I think its a B06, the numbers have mostly flaked off. It was manufactured in Nov. 2005. When I plug it in and press the power button, it clicks, blinks four times, pauses, then blinks four times again. It continues this pattern until I unplug it. If someone could just point me to the right fuses, or whatever it is that is screwing up, I would really appreciate it. Also, I don't know too much other than how to solder and what a resistor looks like, so I would appreciate a description of what the part looks like and where to find it in the TV.

Thanks
Erik

Posted by on

  • 1 more comment 
  • Anonymous May 31, 2008

    I have a Trinitron Wega Model No. KV-27FS100, Made in Mexico, chasis BA5D.

    Once the TV is on, the picture goes off, the sound stays on and the timer LED light flashes 5 times, picture comes back on; after a few seconds or a minute or more (it varies) the same thing happens again and again and again.....I have already turn the TV off and unplugged in an effort to reset it but nothing has changed.



    Please help!! I love my tv and has never given me any trouble before.

  • patel_ashesh Aug 13, 2008

    Sony FD Trinitron WEGA KV-27FS120 27" TV

    No sound or video,Fout time timer red LED flash

    checked fuse is okay,relay click sound ok

    missisng +/- 13 volt, help me



    ashes

  • Anonymous Jan 08, 2009

    my sony FD Trinitron WEGA KV-27FS16 (year 2000 model) timer light blinks 5 times intermittently. no picture no sound

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

PER TO WHAT SONY HAS TO SAY IT IS A VERTICAL PROBLEM. SOME TIMES TH EIC JUST NEEDS TO BE SOLDERED. IT IS ON A SMALL HEAT SINK IC545. IF IT IS NOT SOLDERED GOOD THE YOU PROBABLY NEED TO REPLACE IT.
There are three defects can cause the Standby/Timer LED to flash in groups of four:
1) +13V and/or –13V from FBT/pins 9 and 7 respectively are missing on Vertical Drive IC545.
2) Vertical Drive IC545 is defective (no reference pulses output on IC545/pin 3 to IC001/pin 78).DON...

Posted on Mar 09, 2008

2 Suggested Answers

SOURCE: Screen Doesn't turn on, light blinks four times

Good day.
First, A resistor looks like a little tube with different colors placed in stripe form and has two ends or terminals. The colors represent the value the 1st and 2nd 3rd being the significant digits. The 3rd is the multiplier and the 4th is the tolerance.

Consider the vertical IC of your unit being the cause of this. Also, there are cases wherein the X-ray protector resistor is to be blamed.


chris

Posted on Mar 11, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light blinking 4 times and no picture


Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check IC1509, Q1505.
If you wish to get more details, check the site linked here.

Nov 27, 2013 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Sony FD Trinitron WEGA Tv - LAMP blinking 11 times


Sony tv has self protection program. The red Led blinking light indicate the probable cause location. For this model it is either 2,4 or 5 flashes every 3 second. Please check the blinking again

Feb 09, 2010 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

I have a Sony FD Trinitron WEGA KV-27FS120 the Standby light flashes four consecutive times with a pause in between sequences. When I turn the TV on with the remote, it powers up, you have volume but no...


It is vertical deflection failure problem.
Let me know if you want to repair TV by yourself, that requires soldering parts in PCB experience.

Aug 08, 2009 | Televison & Video

1 Answer

TV won't turn on, standby LED starts blinking


HI, this is the result of an unstable power sector in this unit. the fly back is malfunctioning and, you will need to replace it asap. i will list the part number below and a link to a site as well. you can purchase this part on-line if you wish.

FBT ASSY NX-4521//X4
Sony Part Number: 1-453-310-11

CLICK HERE TO ORDER

Jun 21, 2009 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Can't see anything


adjust the screen at the CRT section

Sep 27, 2008 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

KV-27S42 four time blinks


pls let me know, are you TV tech? or just trying at your own.

Aug 13, 2008 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

KV-27FS120 blinks 2 times continuously...


This is not for a DIY're.

It is possible that the flyback transformer and the horizontal output transistor have failed. Also there may be damage in the power supply when these components fail.

When troubleshooting, it is important that the tech locate the cause of the fault and also change the related components.

After the parts are changed, the power supply and the high voltage setups must be done to make sure that the voltages are in specs.

This type of work must be done by an experienced TV tech. He will have the necessary test equipment, tools, service manuals, and training. There are some very serious safety issues when working in a TV set.


Jerry G.

Jun 19, 2008 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Screen Doesn't turn on, light blinks four times


Good day.
First, A resistor looks like a little tube with different colors placed in stripe form and has two ends or terminals. The colors represent the value the 1st and 2nd 3rd being the significant digits. The 3rd is the multiplier and the 4th is the tolerance.

Consider the vertical IC of your unit being the cause of this. Also, there are cases wherein the X-ray protector resistor is to be blamed.


chris

Mar 08, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-27FS120 27" TV Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...