Driver for microtek scanmaker 3800 for vista - Microtek ScanMaker 3800 Flatbed Scanner

Run a search for the scanner software on the internet and download it then install it to your computer. (type in microtek scanmaker 3800 software) Then connect the scanner to your pc and turn it on.

Hi Lory,
Please use the below link, which has the exact software for the Microtek ScanMaker 3800 Flatbed scanner.

http://download.cnet.com/Microtek-ScanMaker-3800/3000-2118_4-66399.html

and Click on Download

Please check and revert back to us
Thanks for contacting Fixya
Regards,
Aysaam

Drivers for MICROTEK SCANMAKER 3800 Link -1

Driver from Official Microteck Site Link-2

Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH

You can download: ScanWizard 5 version 6.63 Here: ftp://microtek:[email protected]/microtek/pcfiles/drv_sw5_v6_63_ad.exe
Extract to folder on desktop. 1. Plug in your Scanner 2. Go to Control Panel (Windows 7 - 64 and 32 bit) 3. Go to Device Manager 4. Go to Imaging devices (or Other devices) 5. Find what windows have installed Right Click 6. Update Driver Software.. 7. Click - Browse my computer for driver software 8. Click - Let me pick from a list of device drivers on my computer 9. Click - Have Disk 10. Browse to your desktop or position where you extracted 6.63, point to "....drv_sw5_v6_63_ad\Disk1\Vista\AMD64\..." Pick any of INF files I picked first 11. You will see 4800 Scanner and USB 2.0 Scanner, I picked first 4800 then USB 2.0 and both works.
I managed before to do it with simple install but well, it works .. ;)

you can download it from

http://www.driverskit.com/freedownload/Scanner/Microtek/ScanMaker_3840_3830_3800_ScanWizard_5_5_93/14515.html

This works for Windows 7 I think it works for vista too:
You can download: ScanWizard 5 version 6.63 Here: ftp://microtek:[email protected]/microtek/pcfiles/drv_sw5_v6_63_ad.exe
Extract to folder on desktop. 1. Plug in your Scanner 2. Go to Control Panel (Windows 7 - 64 and 32 bit) 3. Go to Device Manager 4. Go to Imaging devices (or Other devices) 5. Find what windows have installed Right Click 6. Update Driver Software.. 7. Click - Browse my computer for driver software 8. Click - Let me pick from a list of device drivers on my computer 9. Click - Have Disk 10. Browse to your desktop or position where you extracted 6.63, point to "....drv_sw5_v6_63_ad\Disk1\Vista\AMD64\..." Pick any of INF files I picked first 11. You will see 4800 Scanner and USB 2.0 Scanner, I picked first 4800 then USB 2.0 and both works.
I managed before to do it with simple install but well, it works .. ;)

Go to the manufacturers websites and download the driver from there.

You can get it right here

http://support.microtek.com/downloads/

Enter 4900 in the model number blank and click on search. Enter your windows version and get your download started....

Free.

Click HERE to download your driver. Just select your operating system and follow the on screen promts. Windows Vista is not supported.

You can download the drivers from this page: http://support.microtek.com/

cheers