- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Go to this site and put you make and model number in the search bar and you will be able to get the manual for your dvd player. http://tv.manualsonline.com/support/other/flat-panel-television/instruction-manual
Many of the modern remotes have no codes for VCR only CD/DVD. The VCR generation is supposed to be dead as no big players are making them anymore. One can purchase Digital Video recorders which will record on Hard Disc or directly on CD/DVD's with out any loss of picture quality.And some of the recorders can record more than 500 hours of High Quality videos !!!
Connect the vcr to the dvd recorder via scart. Set TV to your usual dvd channel and power on dvd. Power on vcr and scroll through input channels (AV etc) on dvd recorder until you find the signal from vcr. Prepare the recorder ready to record, then play the vcr and start the dvd to record.
Make sure when you do the process two things: one, a blank tape or If it is a dvd recorder, a blank disk is inserted, in the tape make sure the tab that prevents recording is not broken.Two, before exit the timer recording menu, make sure that there is not a instruction that says "done" or "confirm" or any word meaning that all the steps went through.
Sounds like the unit is bad, or set to the wrong Regional Code. Its not easy to set the regional code and it varies by model. You are better off buying a new DVD player given they can be found for under $30.
Samsung DVD player codes: 20490, 20573, 21932, 21075, 20820.
With device turned on press DVD button on insignia remote then press and hold setup until the red led light blinks twice. enter code and it should blink twice again. press power button to check if code took. If not, try another code.