An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert whose answer got voted for 20 times.
Re: kyocera km 2050
The 2050 uses 2 network connections, one for the printer and one for the scanner.
Before I go into any great detail,
Do you have a home network? Are you using a switch?
Are you printing through the network connection or the USB/parallel port?
Are you trying to twain scan? Do you have the software CD for scanning.
If not, you will need to download the drivers from the Kyocera web site.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Firmware up dates for these machines need to be done by someone with experience. There are two seperate for the machine, printer, fax, and scanner and are done differently. THe updates are provided by the manufacture to dealers that are trained to work on these machines and should not be done by others because there can be a negative outcome if done improperly, leaving your machine nonfunctional.
The link below will take you to the manufacture's website where you can download all the user manuals for this machine and in them you will find the instructions. If you need further help go to www.gfbm.net
• The home position is not correct
when the power is turned on or copying
the document placed on the contact
the connector terminals.
the issue needs to be resolved on the other end..It's not an issue with your machine...They need to do 1 of 3 things...either setup distinctive ring with their phone company...or purchase a fax line.. or get something called "the stick"
The km 2050 was on network, but moved to home and directly into tower system via usb interface connector. Printer works, but can not get scanner to work? read instructions without a clue. can someone help with correct proceedure?
you need to get the i.p address of your scanner and access it from your browser.
on the bottom left of the command centre menu you will see SCAN TO PC "destination" . put your details in new screen. if you are using a static i.p address for your pc put that in. if you are running dhcp you should use the host name of your pc