I have a powershot SD750 and I cannot get the color settings off of 'off'

Press the FUNC/SET button. Use cursor-up/down to select the fourth item along the left edge of the display. Use cursor-left/right to select one of the color modes.

how to set the resolution to highest option

Issue: How do I reset the camera to its default settings?
Solution: Procedure for resetting the camera to its default settings PowerShot SD750 and SD1000.

Resetting Settings to Their Default Values - PowerShot SD750 and SD1000. 1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the button, highlight the yellow (Set up) tab. 3. Using the button, select [Reset All..] and press . 4. Select [OK] and press .

• Settings cannot be reset when the camera is connected to a computer or to a printer.
• The following cannot be reset:
• • Shooting mode
  • The [Date/Time], [Language] and [Video System] options in the (Set up) menu
  • White balance data recorded with the custom white balance function
  • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
  • Newly added My Camera settings

Press the Playback button (the right-pointing triangle). Hold down the FUNC/SET button and press the MENU button. Use the arrow keys to select English, then press the FUNC/SET button.

Go into the picture taking menu and find a setting for picture quality...choose the largest one.

Turn the camera on and do the following:

Press Menu
Press to the right once
Press up once
Press Function Set
Press Right
Press Function Set

That is the key sequence on that model to do a soft reset. If you still have problems, try emailing: www.camerasandparts.com as they specialize in the service for these Powershots. They're fantastic if you should further help, they're the place for the powershots. Good luck with it.

i dont know how to change from color to black and white. how do i do that?

1. Turn the camera on, make sure it is in playback mode.
2. Press and hold the Func/Set button, and while still holding
3. Press the Menu button. Release both buttons.
4. Use the arrow keys to highlight desired language
5. Press the Func/Set button

Hi - You can download the manual by clicking the link underlined in blue below:

POWERSHOT SD750

See page 58:





Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Page 46 of Advanced User's Guide:

Press Menu, select AiAF, set it to "Face Detect".