Question about Mitsubishi WS-55907 55" Rear Projection Television

2 Answers

Error code 22 on a Mitsubishi WS-55907 55'' HDTV

How does one deal with this???

Posted by on

  • Anonymous Apr 02, 2008

    mitsubishi ws48313 error code 22 what do i look for?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mitsubishi model ws48313 error code 22 what do i look for to fix?

Posted on Apr 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Your set is the V17 series so a code 22 means short protect. Which means the TV has a short circuit condition and is shutting down to prevent further damage. You can get a manual for the V17 sereis at the following link for 15.99 and they will provide free unlimited support to help you with the diagnosis and locating parts. Your set is coverd in the V17 sereis service manual under the mitsubishi section. Here is the link in case youd like the service manual and free support.
http://servicemanuals.vstore.ca/

Posted on Mar 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 18 on Mitsubishi WS-55311


This is a V20 chassis, circa 2002
Available error codes for this unit are as follows:

12.....No error has occurred

21.....X-Ray protect circuit

22.....Short protect circuit

23.....Horizontal deflection failure

24.....Vertical deflection failure

Jan 07, 2015 | Mitsubishi Projection Televisions

2 Answers

Mitsubishi WS-A55 with a 2-3 error code


SD Tech - I have the error code 22 on my WS-A55. Power light comes on and then quickly shuts off. Looked at circuit board - there was greenish "gunk" on two of the electronic parts on the board in the center (behind the speaker grill) in the area labelled R5A62. Would you be so kind as to post repair instructions and the name of parts seller you mentioned above? Thanks!!!

Mar 17, 2013 | Mitsubishi WS-48315 48" Rear Projection...

1 Answer

Ws-65511 error code 22 sd tech


error code 22 is an indication of a short in a low voltage power supplies

Oct 13, 2010 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

I'm getting an error code 32.On a WS-55859


32 isnt a valid code for your model. Mitsubishi model WS55859 has only 5 possible codes they are 12, 21, 22, 23, and 24 Double check the code again and resond to this same post and i will assist you.

Dec 04, 2009 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

Ws-6580 error code 23


CODE / INDICATES
12 / No error has occured
21 / X-Ray Protect Shutdown
22 / Short Protect Shutdown
23 / Horizontal Deflection failure
24 / Vertical Deflection failure

Aug 06, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Will not stay on., Automatically turns off.


Try pressing in both the menu and device/input buttons in together on the front of the set and hold for 5 seconds to see if the led will blink a two digit error code such as 2 blinks then a pause then two more blinks followed by a pause which would indicate a 22 error. Then let me know what the blink code was if any.

May 23, 2009 | Mitsubishi WS-65909 65" Rear Projection...

1 Answer

I have a mitsubishi ws-55809 power comes on and then goes off


try to check it again as these are the only codes for your model.
3. Error Codes
The Error Code designations indicating a malfunction, or no malfunction, are listed below:
“12” ... indicates no error has occurred.
“21” ... X-Ray Protect circuit.
“22” ... Short Protect circuit.
“23” ... Horizontal Deflection failure.
“24” ... Vertical Deflection failure.

Mar 14, 2009 | Projection Televisions

1 Answer

WS-65809 ERROR CODE 22


look on the center circuit board and you will see two green Pico fuses they look like resistors but they dont have any bands on them . They will have F9A04 and F9A05 on the board next to them. Check with a ohms meter if those fuses are open you will ned new convergence ICs. Thats the first thing to check are those two pico fuses when you get a 22 error on your model.

Sep 10, 2008 | Mitsubishi WS-65809 65" Rear Projection...

Not finding what you are looking for?

Open Questions:

Mitsubishi WS-55907 55" Rear Projection Television Logo

904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68153 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...